Search results

This study aims to investigate numerically the problem of conjugate conduction and mixed convection heat transfer of a nanofluid in a rotational/stationary circular enclosure using a two-phase mixture model.

Hot and cold surfaces on the wall or inside the enclosure (heater and cooler) are maintained at constant temperature of T_h and T_c, respectively, whereas other parts are thermally insulated. To examine the effects of various parameters such as Richardson number (0.01 = Ri =100), thermal conductivity ratio of solid to base fluid (1 = K_r = 100), volume fraction of nanoparticle (0 = φ = 0.05), insertion of conductive covers (C.Cs) around the heater in a different shape (triangular, circular or square), segmentation and arrangement of the conductive blocks (C.Bs) and rotation direction of the enclosure on the flow structure and heat transfer rate, two-dimensional equations of mass, momentum and energy conservation, as well as volume fraction, are solved using finite volume method and Semi-Implicit Method for Pressure Linked Equations (SIMPLE) algorithm.

The results show that inserting C.C around heater can increase or decrease heat transfer rate, and it depends on thermal conductivity ratio of solid to pure fluid. Also, it is found that by the division of C.B and location of its portions in a horizontal configuration, heat transfer rate reduces. Moreover, it is observed that external heating and cooling of the enclosure causes enhancement of heat transfer relative to that of internal heating and cooling. Finally, results illustrate that under the condition that cylinders rotate in the same direction, the heat transfer rate increases as compared to those that rotate in the opposite direction. Hence rotation direction of cylinders can be used as a desired parameter for controlling heat transfer rate.

A comprehensive report of results for the problem of conjugate conduction and mixed convection heat transfer in a circular cylinder containing different shapes of C.C, conducting obstacle and heater and cooler has been presented. An efficient numerical technique has been developed to solve this problem. The achievements of this paper are purely original, and the numerical results were never published by any researcher.

This paper aims to report a stretchable piezoresistive strain sensor array that can detect various static and dynamic stimuli, including bending, normal force, shear stress and certain range of temperature variation, through sandwiching an array of conductive blocks, made of multiwalled carbon nanotubes (MWCNTs) and polydimethylsiloxane (PDMS) composite. The strain sensor array induces localized resistance changes at different external mechanical forces, which can be potentially implemented as electronic skin.

The working principle is the piezoresistivity of the strain sensor array is based on the tunnelling resistance connection between the fillers and reformation of the percolating path when the PDMS and MWCNT composite deforms. When an external compression stimulus is exerted, the MWCNT inter-filler distance at the conductive block array reduces, resulting in the reduction of the resistance. The resistance between the conductive blocks in the array, on the other hand, increases when the strain sensor is exposed to an external stretching force. The methodology was as follows: Numerical simulation has been performed to study the pressure distribution across the sensor. This method applies two thin layers of conductive elastomer composite across a 2 × 3 conductive block array, where the former is to detect the stretchable force, whereas the latter is to detect the compression force. The fabrication of the strain sensor consists of two main stages: fabricating the conducting block array (detect compression force) and depositing two thin conductive layers (detect stretchable force).

Characterizations have been performed at the sensor pressure response: static and dynamic configuration, strain sensing and temperature sensing. Both pressure and strain sensing are studied in terms of the temporal response. The temporal response shows rapid resistance changes and returns to its original value after the external load is removed. The electrical conductivity of the prototype correlates to the temperature by showing negative temperature coefficient material behaviour with the sensitivity of −0.105 MΩ/°C.

The conductive sensor array can potentially be implemented as electronic skin due to its reaction with mechanical stimuli: compression and stretchable pressure force, strain sensing and temperature sensing.

This prototype enables various static and dynamic stimulus detections, including bending, normal force, shear stress and certain range of temperature variation, through sandwiching an array of conductive blocks, made of MWCNT and PDMS composite. Conventional design might need to integrate different microfeatures to perform the similar task, especially for dynamic force sensing.

The purpose of this paper is to study problem of conjugate MHD natural convection of Al₂O₃-water nanofluid in a square cavity with conductive inner block using Buongiorno’s two-phase model numerically.

An isothermal heater is placed on the left wall of the square cavity, while the right wall is maintained at a constant cold temperature. The horizontal top and bottom walls are kept adiabatic. The boundaries of the annulus are assumed to be impermeable, the fluid within the cavity is a water-based nanofluid having Al₂O₃ nanoparticles. The Boussinesq approximation is applicable. The governing equations subject to the boundary conditions are solved using the finite difference method.

Numerical results are presented graphically in the form of streamlines, isotherms and nanoparticles distributions as well as the local and average Nusselt numbers. The results show that the effect of the nanoparticles addition on the average Nusselt number is essential for low Rayleigh, high Hartmann and high values of length ratio when attenuated the convective flow.

According to exist studies and to the authors’ best knowledge, so far, there have been no studies of conjugate natural convection of Al₂O₃-water nanofluid in a square cavity with a conductive inner block using Buongiorno’s two-phase model with the effect of the magnetic field. Thus, the authors believe that this work is new and valuable. The aim of this study is to investigate the MHD natural convection of Al₂O₃-water nanofluid in a square cavity with conductive inner block using Buongiorno’s two-phase model.

The purpose of this paper is to synthesise the block copolymer of pyrrole (Py) with bis(4‐inobutyl)polydimethylsiloxane (DA.PDMS) by electrochemical method. The characterisation of the insoluble block copolymers, P(Py‐b‐DA.PDMS), was performed by cyclovoltammetric measurements, solid‐state conductivity and DSC measurements. The surface morphology of the copolymers was examined with scanning electron microscope (SEM).

Electropolymerisation process was performed potentiostatically and potentiodynamically. Redox behaviour of the resulting copolymer films was investigated. In‐situ spectroelectrochemical measurement was carried out on indium thin oxide (ITO) electrodes.

The ionisation potentials (Ip), electron affinity (Ea), optical band gap (Eg), peak potentials (Ep), and doping degree (y) of copolymers were calculated by using in‐situ spectroelectrochemical measurement results. The copolymers have slightly lower doping degree, band gap, Ip and Ea values than homopolymer. Copolymers had the conductivities of 10‐5 S/cm and had Tg values.

This study can also be focused on obtaining conductive copolymer with insulator DA.PDMS blocks on the PPy chain by one‐step polymerisation.

This work provides technical information for the synthesis and characterisation of conducting block copolymer by electrochemical method.

Change in optical and electrical properties of the P(Py‐b‐DA.PDMS) shows the role of the individual properties of the copolymer blocks. While the DSC scan of PPy showed no transition temperature, which is a characteristic property of conducting copolymers, P(Py‐b‐DA.PDMS) had Tg values. This might be due to the inclusion of the DA.PDMS blocks on the PPy chains.

The purpose of this paper is to study the influence of magnetic field on entropy generation and natural convection inside an enclosure filled with a hybrid nanofluid and having a conducting wavy solid block. Also, the effect of fluid–solid thermal conductivity ratio is investigated.

The governing equations that are formulated in the dimensionless form are discretized via finite volume method. The velocity–pressure coupling is assured by the SIMPLE algorithm. Heat transfer balance is used to verify the convergence. The validation of the numerical results was performed by comparing qualitatively and quantitatively the results with previously published investigations.

The results indicate that the magnetic field and the conductivity ratio of the wavy solid block can significantly affect the dynamic and thermal field and, consequently, the heat transfer rate and entropy generation because of heat transfer, fluid friction and magnetic force.

To the best of the authors’ knowledge, the present numerical study is the first attempt to use hybrid nanofluid for studying the entropy generation because of magnetohydrodynamic natural convective flow in a square cavity with the presence of a wavy circular conductive cylinder. Irreversibilities due to magnetic effect are taken into account. The effect of fluid–solid thermal conductivity ratio is considered.

The purpose of this study is to explore the heat transfer enhancement in copper–water nanofluid flowing in a diagonally vented rectangular enclosure with four discrete heaters mounted centrally on the sidewalls and a square-shaped embedded heated block in the influence of a static magnetic field.

Four discrete heaters are mounted centrally on each sidewall of the rectangular enclosure that embraces a heated square block. A static transverse magnetic field is acting on the vertical walls. The Navier–Stokes equations of motion and the energy equation are modified by incorporating Lorentz force and basic physical properties of nanofluid. The derived momentum and energy equations are tackled numerically using the successive over-relaxation technique associating with the Gauss–Seidel iteration technique. The effects of physical parameters connected to dynamics of flow and heat convection are explored from streamlines and isotherms graphs and discussed numerically in terms of Nusselt number.

The effect of the embedded heated square block size and its location in the enclosure, nanoparticles volume fraction and the intensity of the magnetic field on flow and heat transfer are computed. Compared with the case when no heated block is embedded in the enclosure, in free convection at Ra = 106, the average local Nusselt number on the wall-mounted heaters is attenuated by 8.25%, 11.24% and 12.75% when the enclosure embraced a heated square block of side length 10% of H, 20% of H and 30% of H, respectively. An increase in Hartmann number suppresses the heat convection.

The enhancement in the convective heat is greater when the buoyancy effect dominates the viscous effects. Placing the embedded heated block near the inlet vent, the lower temperature zone has reduced while the embedded heated block is at the central location of the enclosure, the high-temperature zone has expanded. The external magnetic field can be used as a non-invasive controlling device.

The numerically simulated results for heat convection of water-based copper nanofluid agreed qualitatively with the existing experimental results.

The models could be used in designing a target-oriented heat exchanger.

The paper includes a comparative study for three locations of the embedded heated square. The optimal results for the centrally located heated block are also performed for three different sizes of the embedded block. The numerically simulated results are compared with the published numerical and experimental studies.

The purpose of this paper is to investigate computationally the hydrothermal characteristics for forced convective laminar flow of water through a channel with a top wavy wall and a flat bottom wall having metallic porous blocks.

The governing equations are solved computationally using a finite element method–based numerical solver COMSOL Multiphysics® for the following range of parameters: 10 ≤ Reynolds number (Re) ≤ 500 and 10^–4 ≤ Darcy number (Da) ≤ 10^–1.

The presence of porous blocks significantly influences the heat transfer rate, and the value of local Nusselt number increases with the increase in Da. The value of the average Nusselt number decreases with Da for the top wall and the same is enhanced for the bottom wall of the wavy channel with porous blocks (WCPB). The value of the average Nusselt number for WCPB is significantly higher than that of the wavy channel without porous block (WCWPB), plane channel without porous block (PCWPB) and plane channel with the porous block (PCPB) at higher Re. For PCPB, the performance factor (PF) is always higher than that of WCWPB and WCPB for Da = 10^–4 and Da = 10^–3. Also, PF for WCPB is higher than that of WCWPB for higher Re except for Da = 10^–4. Further, the value of for WCPB is higher than that of PCPB at Da = 10^–2 and 10^–1 at Re = 500.

The current study is useful in designing efficient heat exchangers for process plants, solar collectors and aerospace applications.

The analysis of thermo-hydraulic characteristics for laminar flow through a channel with a top wavy wall and a flat bottom wall having metallic porous blocks have been analyzed for the first time. Further, a comparative assessment of the performance has been performed with a wavy channel without a porous block, a plane channel without a porous block and a plane channel with porous blocks.

Polymer thick film (PTF) technology provides the lowest cost, cleanest and most efficient manufacturing method for producing flexible circuits. Non‐contact radio frequency (RF) smart cards and related information transaction devices, such as RFID tags, appear to be a good fit for PTF‐flex. Flip chip also seems well suited for these “contactless” RF transceiver products. Flip chip and PTF adhesive technologies are highly compatible and synergistic. All PTF SMT adhesives assembly methods are viable for flip chip. However, the merging of flip chip with PTF‐flex presents major challenges in design, materials and processing. This paper will compare assembly methods and discuss obstacles and solutions for state‐of‐the‐art flip chip on flex within the RFID product environment.

The purpose of this study is to work on heat transfer enhancement within different engineering cavities is the major aim of most technical solutions. Such intensification can be obtained by using “smart” liquids known as nanoliquids and solid fins. Therefore, free convective thermal transmission within square nanoliquid chamber under the influence of complex fins is studied. The considered fins are the combination of wall-mounted adiabatic fin and an adiabatic block over this fin.

Influences of the Rayleigh number, location of the local adiabatic block and nanoparticles concentration on liquid motion and energy transport are studied. Finite difference technique was used to solve the governing equations.

It has been ascertained that the energy transport intensification can be reached for the middle position of this local block within the cavity.

The main originality of this work is to use intermittent block in a nanofluid filled cavity under differentially heated conditions. One constant and location of one of the passive element is constant and other one is fixed, which is the intermittent block, is used to control heat and fluid flow. Thus, distance between blocks is allowed to control of the velocity and kinetic energy. In this way, temperature distribution also can be controlled inside the square cross-sectional closed space. Another originality of the work is to use nanoparticle added main flow for this geometry. Thus, energy efficiency can be controlled via adiabatic intermittent blocks without spending any extra energy.

One of the major challenges in the design of thermal equipment is to minimize the entropy production and enhance the thermal dissipation rate for improving energy efficiency of the devices. In several industrial applications, the structure of thermal device is cylindrical shape. In this regard, this paper aims to explore the impact of isothermal cylindrical solid block on nanofluid (Ag – H₂O) convective flow and entropy generation in a cylindrical annular chamber subjected to different thermal conditions. Furthermore, the present study also addresses the structural impact of cylindrical solid block placed at the center of annular domain.

The alternating direction implicit and successive over relaxation techniques are used in the current investigation to solve the coupled partial differential equations. Furthermore, estimation of average Nusselt number and total entropy generation involves integration and is achieved by Simpson and Trapezoidal’s rules, respectively. Mesh independence checks have been carried out to ensure the accuracy of numerical results.

Computations have been performed to analyze the simultaneous multiple influences, such as different thermal conditions, size and aspect ratio of the hot obstacle, Rayleigh number and nanoparticle shape on buoyancy-driven nanoliquid movement, heat dissipation, irreversibility distribution, cup-mixing temperature and performance evaluation criteria in an annular chamber. The computational results reveal that the nanoparticle shape and obstacle size produce conducive situation for increasing system’s thermal efficiency. Furthermore, utilization of nonspherical shaped nanoparticles enhances the heat transfer rate with minimum entropy generation in the enclosure. Also, greater performance evaluation criteria has been noticed for larger obstacle for both uniform and nonuniform heating.

The current numerical investigation can be extended to further explore the thermal performance with different positions of solid obstacle, inclination angles, by applying Lorentz force, internal heat generation and so on numerically or experimentally.

A pioneering numerical investigation on the structural influence of hot solid block on the convective nanofluid flow, energy transport and entropy production in an annular space has been analyzed. The results in the present study are novel, related to various modern industrial applications. These results could be used as a firsthand information for the design engineers to obtain highly efficient thermal systems.