Search results

We present the finite element simulations of reactive mineral‐carrying fluids mixing and mineralization in pore‐fluid saturated hydrothermal/sedimentary basins. In particular we explore the mixing of reactive sulfide and sulfate fluids and the relevant patterns of mineralization for lead, zinc and iron minerals in the regime of temperature‐gradient‐driven convective flow. Since the mineralization and ore body formation may last quite a long period of time in a hydrothermal basin, it is commonly assumed that, in the geochemistry, the solutions of minerals are in an equilibrium state or near an equilibrium state. Therefore, the mineralization rate of a particular kind of mineral can be expressed as the product of the pore‐fluid velocity and the equilibrium concentration of this particular kind of mineral. Using the present mineralization rate of a mineral, the potential of the modern mineralization theory is illustrated by means of finite element studies related to reactive mineral‐carrying fluids mixing problems in materially homogeneous and inhomogeneous porous rock basins.

Aqueous zinc-ion battery has broad application prospects in smart grid energy storage, power tools and other fields. Co₃O₄ is one of the ideal cathode materials for water zinc-ion batteries due to their high theoretical capacity, simple synthesis, low cost and environmental friendliness. Many studies were concentrated on the synthesis, design and doping of cathodes, but the effect of process parameters on morphology and performance was rarely reported.

Herein, Co₃O₄ cathode material based on carbon cloth (Co₃O₄/CC) was prepared by different temperatures hydrothermal synthesis method. The temperatures of hydrothermal reaction are 100°C, 120°C, 130°C and 140°C, respectively. The influence of temperatures on the microstructures of the cathodes and electrochemical performance of zinc ion batteries were investigated by X-ray diffraction analysis, scanning electron microscopy, cyclic voltammetry curve, electrochemical charging and discharging behavior and electrochemical impedance spectroscopy test.

The results show that the Co₃O₄/CC material synthesized at 120°C has good performance. Co₃O₄/CC nanowire has a uniform distribution, regular surface and small size on carbon cloth. The zinc-ion battery has excellent rate performance and low reaction resistance. In the voltage range of 0.01–2.2 V, when the current density is 1 A/g, the specific capacity of the battery is 108.2 mAh/g for the first discharge and the specific capacity of the battery is 142.6 mAh/g after 60 charge and discharge cycles.

The study aims to investigate the effect of process parameters on the performance of zinc-ion batteries systematically and optimized applicable reaction temperature.

The purpose of this paper is to examine the feasibility of an ideal power network that combines many different renewable energy technologies such as wind power, concentrated solar power (CSP) and hydroelectric power. This paper emphasizes in finding the benefits arising from hydrothermal coordination compared to the non-regulated integration of the hydroelectric units, as well as the benefits from the integration of wind power and CSP.

Artificial Neural Networks were used to estimate wind power output. As for the CSP system, a three-tier architecture which includes a solar field, a transmission-storage system and a production unit was used. Each one of those separate sections is analyzed and the process is modeled. As for the hydroelectric plant, the knowledge of the water’s flow rated has helped estimating the power output, taking into account the technical restrictions and losses during transmission. Also, the economic dispatch problem was solved by using artificial intelligence methods.

Hydrothermal coordination leads to greater thermal participation reduction and cost reduction than a non-regulated integration of the hydrothermal unit. The latter is independent from the degree of integration of the other renewable sources (wind power, CSP).

Hydrothermal coordination in a power system which includes thermal units and CSP for cost and emissions reduction.

We use the finite element method to model the heat transfer phenomenon through permeable cracks in hydrothermal systems with upward throughflow. Since the finite element method is an approximate numerical method, the method must be validated before it is used to solve any new kind of problem. However, the analytical solution, which can be used to validate the finite element method and other numerical methods, is rather limited in the literature, especially for the problem considered here. Keeping this in mind, we have derived analytical solutions for the temperature distribution along the vertical axis of a crack in a fluid‐saturated porous layer. After the finite element method is validated by comparing the numerical solution with the analytical solution for the same benchmark problem, it is used to investigate the pore‐fluid flow and heat transfer in layered hydrothermal systems with vertical permeable cracks. The related analytical and numerical results have demonstrated that vertical cracks are effective and efficient members to transfer heat energy from the bottom section to the top section in hydrothermal systems with upward throughflow.

This paper aims to elucidate the geochemical characteristics of the hydrothermally altered rocks with gold mineralization and the elemental transfers in hydrothermal alteration hosted in alkaline complex in Hongshan area, Taihang Orogen, North China, and preliminarily discuss the relationship between the gold mineralization and the hydrothermal alteration.

Based on detailed field investigation, sampling and petrographical observation, major oxides and trace elements of nine rock samples are analyzed, and the method of mass balance equation is used in calculation of the elemental transfer.

Three alteration stages in the Hongshan area are identified, which are the early, main and late alterations. The early one is characteristic of extensive pyritization in the complex, which is related to the mantle-derived magmas and occurs before gold mineralization. The main one is characterized by developing a great deal of altered rock in fracture zones with the gain of many elements and the loss of a few elements. The late one is dominated by limonitization, that is limonite replacing the early pyrite or Fe₂O₃ replacing FeO in rocks. In the main alteration, the altered rocks obviously gain fluid component (LOI, i.e. loss on ignition) and elements such as V, As, Rb, Au, La, Ce and Nd and total rare earth elements (REEs). Elements such as K, Fe, Cu, Zn, Y, Mo, Sb, W, Re and U are gained in some altered rocks. Na and Sr are lost in all altered rocks, and Th and Bi are lost in some ones in the meantime. The following elements: Si, Mg, Mn, Ca, Li, Sc, Cr, Co, Ni, Zr, Ag, Ba and Hg show either gain or loss in different altered rocks. Au is notably enriched in the hydrothermal alteration. The elemental gain or loss in the altered rocks indicates that the main mineralization develops extensive de-alkalinization, local potassic metasomatism, silicification or desilicification.

This paper addresses materials and processes for printed wiring board compatible embedded capacitors using polymer/ceramic nanocomposites and hydrothermal barium titanate. Polymers allow low temperature fabrication appropriate to the board (MCM‐L) technology. The lower dielectric constants of the commercially available polymers can be greatly compensated by incorporating higher permittivity ceramic fillers. Materials requirements for higher capacitance density (>30 nF/cm²) have been addressed through implementation of a novel low‐temperature processable hydrothermal barium titanate film on a patterned titanium foil laminated to the PWB. Application of hydrothermal grown barium titanate is currently being evaluated using a multi‐layer system‐on‐package demonstration.

It is of great significance to study the influence of subgrade filling on permafrost temperature field in permafrost area for the smooth construction and safe operation of railway.

The paper builds up the model for the hydrothermal coupling calculation of permafrost using finite element software COMSOL to study how permafrost temperature field changes in the short term after subgrade filling, on which basis it proposes the method of calculation for the concave distortion of freezing front in the subgrade-covered area.

The results show that the freezing front below the subgrade center sinks due to the thermal effect of subgrade filling, which will trigger hydrothermal erosion in case of sufficient moisture inflows, leading to the thawing settlement or the cracking of the subgrade, etc. The heat output of soil will be hindered the most in case of July filling, in which case the sinking and the distortion of the freezing front is found to be the most severe, which the recovery of the permafrost temperature field, the slowest, constituting the most unfavorable working condition. The concave distortion of the freezing front in the subgrade area increases with the increase in temperature difference between the filler and ground surface, the subgrade height, the subgrade width and the volumetric thermal capacity of filler, while decreases with the increase of the thermal conductivity of filler. Therefore, the filler chose for engineering project shall be of small volumetric thermal capacity, low initial temperature and high thermal conductivity whenever possible.

The concave distortion of the freezing front under different working conditions at different times after filling can be calculated using the method proposed.

The purpose of this study is to fabricate an ultraviolet (UV) metal-semiconductor-metal (MSM) photodetector based on zinc oxide nanorods (ZnO NRs) grown on seeded silicon (Si) substrate that was prepared by a low-cost method (drop-casting technique).

The drop-casting method was used for the seed layer deposition, the hydrothermal method was used for the growth of ZnO NRs and subsequent fabrication of UV MSM photodetector was done using the direct current sputtering technique. The performance of the fabricated MSM devices was investigated by current–voltage (I–V) measurements. The photodetection mechanism of the fabricated device was discussed.

Semi-vertically high-density ZnO (NRs) were effectively produced with a preferential orientation along the (002) direction, and increased crystallinity is confirmed by X-ray diffraction analysis. Photoluminescence results show a high UV region. The fabricated MSM UV photodetector showed that the ZnO (NRs) MSM device has great stability over time, high photocurrent, good sensitivity and high responsivity under 365 nm wavelength illumination and 0 V, 1 V, 2 V and 3 V applied bias. The responsivity and sensitivity for the fabricated ZnO NRs UV photodetector are 0.015 A W-1, 0.383 A W-1, 1.290 A W-1 and 1.982 A W-1 and 15,030, 42.639, 100.173 and 334.029, respectively, under UV light (365 nm) illumination at (0 V, 1 V, 2 V and 3 V).

This paper uses the drop-casting technique and the hydrothermal method as simple and low-cost methods to fabricate and improve the ZnO NRs photodetector.

The purpose of the paper is to solve hydrothermal scheduling (HTS) problem for energy-efficient management by allocating the optimal real power outputs for thermal and hydroelectric generators.

HTS can be formulated as a complex and non-linear optimization problem which minimizes the total fuel cost and emissions of thermal generators subject to various physical and operational constraints. As the artificial bee colony algorithm has proven its ability to solve various engineering optimization problems, it has been used as a main optimization tool to solve the fixed-head HTS problem.

A meta-heuristic search technique-based algorithm has been implemented for hydrothermal energy management, and the simulation results show that this approach can provide trade-off between conflict objectives and keep a rapid convergence speed.

The proposed methodology is implemented on the standard test system, and the numerical results comparison indicates a considerable saving in total fuel cost and reduction in emission.

Nowadays, the usage of antibacterial textiles is very popular for different type of textiles. The silver (Ag) and zinc oxide (ZnO) are the most popular materials in order to improve antibacterial properties of textiles. The purpose of this paper is to investigate the possibility to produce Ag nanoparticle (NP), ZnO NP, Ag/ZnO NP composite materials in this experimental study.

It was investigated whether it was possible to produce Ag NP, ZnO NP, Ag/ZnO NP composite materials by hydrothermal method which was known as in-situ approach on the fiber. In addition, the colloidal silver (Ag+) was produced by electrolysis method, and used instead of process water which was necessary during generating of NPs on the fiber by this method. After whole applications, the samples were characterized by SEM, XRD, EDX analyses and the antibacterial activity of specimens was tested according to the ASTM E 2149-01 (gram-negative Escherichia coli). In addition, the resistance to the repeated washes of these antibacterial samples was investigated.

The production of NPs on the fiber was achieved. The results showed that the samples had sufficient antibacterial activity and this activity did not reduce depending on repeated washing treatments.

Because of usage of one type of fiber, it would be necessary to make researches on the different type of fiber, testing procedure (with different bacteria), washing replications and prescriptions.

During the process the temperature control is very important for the produced fiber. In addition chosen antibacterial test method is crucial for the testing of activity of product. Fiber must be washed at least once to remove unfixed NPs on the fiber.

The technical antibacterial polyester fiber was in-situ coated by hydrothermal method with Ag, ZnO, Ag/ZnO composite NPs.