Search results

It is of great significance to study the influence of subgrade filling on permafrost temperature field in permafrost area for the smooth construction and safe operation of railway.

The paper builds up the model for the hydrothermal coupling calculation of permafrost using finite element software COMSOL to study how permafrost temperature field changes in the short term after subgrade filling, on which basis it proposes the method of calculation for the concave distortion of freezing front in the subgrade-covered area.

The results show that the freezing front below the subgrade center sinks due to the thermal effect of subgrade filling, which will trigger hydrothermal erosion in case of sufficient moisture inflows, leading to the thawing settlement or the cracking of the subgrade, etc. The heat output of soil will be hindered the most in case of July filling, in which case the sinking and the distortion of the freezing front is found to be the most severe, which the recovery of the permafrost temperature field, the slowest, constituting the most unfavorable working condition. The concave distortion of the freezing front in the subgrade area increases with the increase in temperature difference between the filler and ground surface, the subgrade height, the subgrade width and the volumetric thermal capacity of filler, while decreases with the increase of the thermal conductivity of filler. Therefore, the filler chose for engineering project shall be of small volumetric thermal capacity, low initial temperature and high thermal conductivity whenever possible.

The concave distortion of the freezing front under different working conditions at different times after filling can be calculated using the method proposed.

This method will become a new development trend in subgrade structure design for high speed railways.

This paper summarizes the structural types and design methods of subgrade bed for high speed railways in China, Japan, France, Germany, the United States and other countries based on the study and analysis of existing literature and combined with the research results and practices of high speed railway subgrade engineering at home and abroad.

It is found that in foreign countries, the layered reinforced structure is generally adopted for the subgrade bed of high speed railways, and the unified double-layer or multi-layer structure is adopted for the surface layer of subgrade bed, while the simple structure is adopted in China; in foreign countries, different inspection parameters are adopted to evaluate the compaction state of fillers according to their respective understanding and practice, while in China, compaction coefficient, subsoil coefficient and dynamic deformation modulus are adopted for such evaluation; in foreign countries, the subgrade top deformation control method, the subgrade bottom deformation control method, the subsurface fill strength control method are mainly adopted in subgrade bed structure design of high speed railways, while in China, dynamic deformation control of subgrade surface and dynamic strain control of subgrade bed bottom layer is adopted in the design. However, the cumulative deformation of subgrade caused by train cyclic vibration load is not considered in the existing design methods.

This paper introduces a new subgrade structure design method based on whole-process dynamics analysis that meets subgrade functional requirements and is established on the basis of the existing research at home and abroad on prediction methods for cumulative deformation of subgrade soil.

This study aims to propose a semiempirical and semitheoretical cyclic compaction constitutive model of coarse-grained soil filler for the high-speed railway (HSR) subgrade under cyclic load.

According to the basic framework of critical state soil mechanics and in view of the characteristics of the coarse-grained soil filler for the HSR subgrade to bear the train vibration load repeatedly for a long time, the hyperbolic empirical relationship between particle breakage and plastic work was derived. Considering the influence of cyclic vibration time and stress ratio, the particle breakage correction function of coarse-grained soil filler for the HSR subgrade under cyclic load was proposed. According to the classical theory of plastic mechanics, the shearing dilatation equation of the coarse-grained soil filler for the HSR subgrade considering particle breakage was modified and obtained. A semiempirical and semitheoretical cyclic compaction constitutive model of coarse-grained soil filler for the HSR subgrade under cyclic load was further established. The backward Euler method was used to discretize the constitutive equation, build a numerical algorithm of “elastic prediction and plastic modification” and make a secondary development of the program to solve the cyclic compaction model.

Through the comparison with the result of laboratory triaxial test under the cyclic loading of coarse-grained soil filler for the HSR subgrade, the accuracy and applicability of the cyclic compaction model were verified. Results show that the model can accurately predict the cumulative deformation characteristics of coarse-grained soil filler for the HSR subgrade under the train vibration loading repeatedly for a long time. It considers the effects of particle breakage and stress ratio, which can be used to calculate and analyze the stress and deformation evolution law of the subgrade structure for HSR.

The research can provide a simple and practical method for calculating deformation of railway under cyclic loading.

This paper aims to present physical and geotechnical study in terms of experimental field and laboratory investigations of the subgrade soils in severely damaged and highly degraded road section with numerous potholes between Chencha to Ezo towns of Ethiopia needs to be addressed for a robust pavement.

Eighteen soil samples were collected from 18 km road stretch at a kilometer interval by considering variation and composition of soils along the road alignment. The field density with dry density, natural moisture content, consistency limit, compaction and California Bearing Ratio (CBR) were determined.

Soils were classified predominantly as silty-clay that replicates its expansive nature, characterized as bad to medium subgrade. The average optimum moisture content and maximum dry density are 17.18% and 1.83 g/cc, whereas the average CBR and swell as 8.40% and 1.49%, respectively. The investigated results indicated that the indispensable way for a stable and durable road subgrade in the existing silty clayey soil requires a capping layer. The results were uploaded into ArcGIS platform to create interactive maps for spatial distribution, composition and strength of the subgrade properties.

Experimental investigation of subgrade soils by scientific procedures and presenting important properties through integrated approach using ArcGIS Mapping for the road pavement design and construction purpose of under developed areas like Chencha-Ezo. ArcGIS-based mapping of all required and numerical subgrade properties with a single click using ArcGIS tool is the main significance and contribution of this study. To the best of the authors’ knowledge, this paper is original, and all the references are properly cited.

This study aims to investigate the service performances of a new full-section asphalt concrete waterproof sealing structure (FSACWSS) for the high-speed railway subgrade through on-site tracking, monitoring and post-construction investigation.

Based on the working state of the waterproof sealing structure, the main functional characteristics were analyzed, and a kind of roller-compacted high elastic modulus asphalt concrete (HEMAC) was designed and evaluated by several groups of laboratory tests. It is applied to an engineering test section, and the long-term performance monitoring and subgrade dynamic performance testing system were installed to track and monitor working performances of the test section and the adjacent contrast section with fiber-reinforced concrete.

Results show that both the dynamic performance of the track structure and the subgrade in the test section meet the requirements of the specification limits. The water content in the subgrade of the test section is maintained at 8–18%, which is less affected by the weather. However, the water content in the subgrade bed of the contrast section is 10–35%, which fluctuates significantly with the weather. The heat absorption effect of asphalt concrete in the test section makes the temperature of the subgrade at the shoulder larger than that in the contrastive section. The monitoring value of the subgrade vertical deformation in the test section is slightly larger than that in the contrastive section, but all of them meet the limit requirements. The asphalt concrete in the test section is in good contact with the base, and there are no diseases such as looseness or spalling. Only a number of cracks are found at the joints of the base plates. However, there are more longitudinal and lateral cracks in the contrastive section, which seriously affects the waterproof and sealing effects. Besides, the asphalt concrete is easier to repair, featuring good maintainability.

This research can provide a basis for popularization and application of the asphalt concrete waterproof sealing structure in high-speed railways.

Cement fly ash gravel (CFG) pile composite foundation is an effective and economic foundation treatment approach, which is significant to build foundation, subgrade construction, and so forth. The purpose of this paper is to present a research on the temperature behaviours of high-latitude and low-altitude island permafrost under CFG pile composite foundation treatment.

In the process of CFG pile construction, the temperature of permafrost and pile body was monitored using the temperature sensors. The influence of subgrade height and atmospheric temperature cycle on permafrost temperature was analysed by finite element simulation.

In the process of CFG pile construction, the change curve of pile temperature and the temperature of permafrost beside pile following time can be divided into six stages, and the duration of these stages is at least one month. The temperature variation of permafrost while constructing subgrade in FEM has a good agreement with the results of field temperature monitoring. The height of subgrade not only affects the maximum temperature increase of permafrost and the re-frozen time of permafrost after the construction of CFG pile composite foundation, but also affects the temperature variation amplitude of permafrost during atmospheric temperature cycle.

The research will provide a reference for the design on the CFG pile composite foundation used for island permafrost and guarantee the stability of the structure; thus, it has an important significance.

The purpose of this study was to investigate the likely causes of failure of some sections of road pavements in Ajaokuta, Northcentral Nigeria. This was achieved through a geotechnical assessment of subgrade soils in affected areas.

The methods entailed field and laboratory methods and statistical analysis. Subgrade soil samples were retrieved from a depth of 1,000 mm beneath the failed portions using a hang auger. The soils were analyzed for natural moisture content (NMC), Atterberg limit (liquid limit, plastic limit and linear shrinkage), grain size distribution, compaction and California bearing ratio (CBR), respectively.

The results of the geotechnical tests ranged from NMC (12.5%–19.4%), sand (84%–98%), fines (2%–16%), LL (16.0%–32.2%), PL (17%–27.5%), LS (2.7%–6.4%), PI (2.5%–18.4%), maximum dry density (1756 kg/m2–1961 kg/m2), optimum moisture content (13.2%–20.2%), unsoaked CBR (15.5%–30.5%) and soaked CBR (8%–22%), respectively. Pearson’s correlation coefficient performed on the variables showed that some parameters exhibited a strong positive correlation with r2 > 0.5.

Funding was the main limitation.

Comparing the results with Nigerian standards for road construction, and the AASHTO classification scheme, the subgrade soils are competent and possess excellent to good properties. The soils also exhibited very low plasticity, a high percentage of sand, high CBR and low NMC, which implies that it has the strength required for road pavement subgrades. The likely causes of the failures are, therefore, due to the use of poor construction materials, technical incompetence and poor compaction of sub-base materials, respectively.

Explore the development trend of chemically-improved soil in railway engineering.

In this paper, the technical standards home and abroad were analyzed. Laboratory test, field test and monitoring were carried out.

The performance design system of the chemically-improved soil should be established.

On the basis of the performance design, the test methods and standards for various properties of chemically-improved soil should be established to evaluate the improvement effect and control the engineering quality.