Search results

This study aims to expose the flow phenomena and entropy generation during a; magnetohydrodynamic (MHD) Poiseuille flow of water-based nanofluids (NFs) in a porous channel subject to hydrodynamic slip and convective heating boundary conditions. The flow caused by the uniform pressure; gradient between infinite parallel plates is considered steady and fully developed. The nanoparticles; namely, copper, alumina and titanium oxide are taken with pure water as the base fluid. Viscous dissipation and Joule heating impacts are also incorporated in this investigation.

The reduced governing equations are solved analytically in closed form. The physical insights of noteworthy parameters on the important flow quantities are demonstrated through graphs and analyzed elaborately. The thermodynamic analysis is performed by calculating entropy generation; rate and Bejan number. A graphical comparison between solutions corresponding to NFs and regular fluid in the channel is also provided.

The analysis of the results divulges that entropy generation minimization can be achieved by an appropriate combination of the geometrical and physical parameters of thermomechanical systems. It is reported that ascent in magnetic parameter number declines the velocity profiles, while the inverse pattern is witnessed with augmentation in hydrodynamic slip parameters. The temperature dissemination declines with the growth of Biot numbers. It is perceived that the entropy generation rate lessens with an upgrade in magnetic parameter, whereas the reverse trend of Bejan number is perceived with expansion in magnetic parameter and Biot number. The important contribution of the result is that the entropy generation rate is controlled with an appropriate composition of thermo-physical parameter values. Moreover, in the presence of a magnetic field and suction/injection at the channel walls, the shear stresses at the channel walls are reduced about two times.

In various industrial applications, minimizing entropy generation plays a significant role. Miniaturization of entropy is the utilization of the energy of thermal devices such as micro heat exchangers, micromixers, micropumps and cooling microelectromechanical devices.

An attentive review of the literature discloses that quite a few studies have been conducted on entropy generation analysis of a fully developed MHD Poiseuille flow of NFs through a permeable channel subject to the velocity slip and convective heating conditions at the walls.

Outstanding features such as superior electrical conductivity and thermal conductivity of alloy nanoparticles with working fluids make them ideal materials to be used as coolants in microelectromechanical systems (MEMSs). This paper aims to investigate the effects of different alloy nanoparticles such as AA7075 and Ti6Al4V on microchannel flow of magneto-nanoliquids with partial slip and convective boundary conditions. Flow features are explored with the effects of magnetism and nanoparticle shape. Heat transport of fluid includes radiative heat, internal heat source/sink, viscous and Joule heating phenomena.

Suitable dimensionless variables are used to reduce dimensional governing equations into dimensionless ordinary differential equations. The relevant dimensionless ordinary differential systems are computed numerically by using Runge–Kutta–Fehlberg-based shooting approach. Pertinent results of velocity, temperature, entropy number and Bejan number for assorted values of physical parameters are comprehensively discussed. Also, a closed-form solution is obtained for momentum equation for a particular case. Analytical results agree perfectly with numerical results.

It is established that the entropy production can be improved with radiative heat, Joule heating, convective heating and viscous dissipation aspects. The entropy production is higher in the case of Ti6Al4V-H₂O nanofluid than AA7075-H₂O. Further, the inequality Ns(ξ)_Sphere > Ns(ξ)_Hexahedran > Ns(ξ)_Tetrahydran > Ns(ξ)_Column > Ns(ξ)_Lamina holds true.

Effects of aluminium and titanium alloy nanoparticles in microchannel flows by using viscous dissipation and Joule heating are investigated for the first time. Flow features are explored with the effects of magnetism and nanoparticle shape. The results for different alloy nanoparticles such as AA7075 and Ti6Al4V have been compared.

The purpose of this paper is to investigate the heat transfer on an alpine‐climbing mitt featuring an electrical heating multilayer, in order to provide information for the optimization of its thermal performance.

A numerical model was developed to simulate the heat transfer across an electrical‐heated alpine mitt. The model was used to study the heat losses as a function of the environmental conditions, to optimise the positioning of the heating elements, to determine the optimal power input to the heating system, to estimate the battery capacity requirements and to assess the effect of low‐emissivity surfaces.

The results show that: the heating elements assure approximately constant temperatures across the skin provided they are not more than 6‐7 mm apart; the use of low‐emissivity surfaces facing the skin can reduce the total heat loss by 8‐36 per cent (for air layer thicknesses in the range 10⁻³ to 10⁻² m) and to increase the skin temperature during the transient operation of the heating multilayer; the heat losses from the mitt are practically independent of the chosen heating power; and a battery capacity of 4 A h assures active temperature regulation for more than 18‐23 h.

By enhancing the thermal performance of an electrical heating mitt, the use of low‐emissivity surfaces (facing the skin) can favour the thermal comfort perception of its user.

The influence of several parameters on the thermal performance of an electrical‐heated mitt is analysed and discussed. The findings are relevant for improving the performance of existing electrical heating garments.

The purpose of this paper is to numerically investigate the hybrid nanofluid flow with the imposition of magnetohydrodynamic (MHD) and radiation effects alongside the convective boundary conditions over a permeable stretching/shrinking surface.

The mathematical model is formulated in the form of partial differential equations (PDEs) and are then transformed into the form of ordinary differential equations (ODEs) by using the similarity variables. The deriving ODEs are solved numerically by using the bvp4c solver in MATLAB software. Stability analysis also has been performed to determine the stable solution among the dual solutions obtain. For method validation purposes, a comparison of numerical results has been made with the previous studies.

The flow and the heat transfer of the fluid at the boundary layer are described through the plot of the velocity profile, temperature profile, skin friction coefficient and local Nusselt number that are presented graphically. Dual solutions are obtained, but only the first solution is stable. For the realizable solution at the shrinking surface, the proliferation of nanoparticle volume fraction (copper) and magnetic (magnetohydrodynamics) parameters can impede the boundary layer separation. Also, Biot number could enhance the temperature profile and the heat transfer rate at the shrinking surface region. The incrementation of 0.1% of Biot number has enhanced the heat transfer rate by approximately 0.1% and the incrementation of 0.5% volume fraction for copper has reduced the heat transfer rate by approximately 0.17%.

The presented model and numerical results are original and new. It can be used as a future reference for further investigation and related practical application. The main contribution of this investigation includes giving the initial prediction and providing the numerical data for the other researchers for their future reference regarding the impacts of nanoparticles volumetric concentration towards the main physical quantities of interest in the presence of magnetic and radiation parameters with the convective boundary conditions.

Nanofluid research has piqued the interest of scientists due to its intriguing applications in nanoscience, biomedical and electrical engineering, medication delivery, biotechnology, food processing, chemotherapy and other fields. This paper aims to inspect the behavior of the mixed convection magnetohydrodynamic flow and heat transfer induced by a nonlinear stretching/shrinking sheet in a nanofluid with a convective boundary condition. Tiwari and Das mathematical nanofluid model is incorporated in the analysis.

The mathematical model is initially transformed to a nondimensional form by using dimensionless variables. Then the nondimensional partial differential equations are further transformed to a set of similarity equations by using the similarity technique. These equations are solved numerically by the bvp4c function in MATLAB software.

For a certain range of the stretching/shrinking parameter, two solutions are obtained. The friction factor and the heat transfer rate escalate due to suction parameter with adding nanoparticles volume fraction by almost 27.15% and 0.153% for the upper branch solution, while the friction factor declines by almost 30.10% but the heat transfer rate augments by 0.145% for the lower branch solution. Furthermore, the behavior of the nanoparticle volume fractions on the heat transfer rate behaves differently in the presence of the mixed convection effect. The temperature of fluid augments with increasing Biot number for both solutions.

The present work considers the flow and heat transfer induced by a stretching/shrinking sheet in a nanofluid using the Tiwari–Das nanofluid model with a convective boundary condition, where the effect of the buoyancy force is taken into consideration. It is shown that two solutions are found for a certain range of the shrinking strength, while the solution is unique for the stretching case. This study is important for scientists working in the growing field of nanofluids to become familiar with the flow properties and behaviors of such nanofluids.

The steady two-dimensional laminar boundary layer flow, heat and mass transfer over a flat plate with convective surface heat flux was considered. The governing nonlinear partial differential equations were transformed into a system of nonlinear ordinary differential equations and then solved numerically by Runge–Kutta method with the most efficient shooting technique. Then, the effect of variable viscosity and variable thermal conductivity on the fluid flow with thermal radiation effects and viscous dissipation was studied. Velocity, temperature and concentration profiles respectively were plotted for various values of pertinent parameters. It was found that the momentum slip acts as a boost for enhancement of the velocity profile in the boundary layer region, whereas temperature and concentration profiles decelerate with the momentum slip.

Numerical Solution is applied to find the solution of the boundary value problem.

Velocity, heat transfer analysis is done with comparing earlier results for some standard cases.

100

The study of novel exponential heat source phenomena across a flowing fluid with a suspension of microparticles and nanoparticles towards a convectively heated plate has been an open question. Therefore, the impact of the exponential heat source in the transport of nano micropolar fluid in the existence of magnetic dipole, Joule heating, viscous heating and convective condition effects has been analytically investigated. Influence of chemical reaction has also been exhibited in this discussion.

The leading equations are constructed via conservation equations of transport, micro-rotation, energy and solute under the non-transient state situation. Suitable stretching transformations are used to transform the system of partial differential equations to ordinary. The transformed ODEs admit numerical solution via Runge–Kutta fourth order method along with shooting technique.

The effects of pertinent physical parameters characterizing the flow phenomena are presented through graphs and discussed. The inclusion of microparticles and nanoparticles greatly affects the flow phenomena. The impact of the exponential heat source (EHS) advances the heat transfer characteristics significantly compared to usual thermal-based heat source (THS). The thermal performance can be improved through the effects of a magnetic dipole, viscous heating, Joule heating and convective condition.

The effectiveness of EHS phenomena in the dynamics of nano micropolar fluid past an elongated plate which is convectively heated with regression analysis is for the first time investigated.

The purpose of this paper is to attempt to investigate the particle migration effects on nanofluid heat transfer considering Brownian and thermophoretic forces. It also tries to develop a model for prediction of the convective heat transfer coefficient.

A modified form of the single-phase approach was used in which an equation for mass conservation of particles, proposed by Buongiorno, has been added to the other conservation equations. Due to the importance of temperature in particle migration, temperature-dependent properties were applied. In addition, neural network was used to predict the convective heat transfer coefficient.

At greater volume fractions, the effect of wall heat flux change was more significant on nanofluid heat transfer coefficient, whereas this effect decreased at higher Reynolds numbers. The average convective heat transfer coefficient raised by increasing the Reynolds number and volume fraction. Considering the particle migration effects, higher heat transfer coefficient was obtained and also the concentration at the tube center was higher in comparison with the wall vicinity. Furthermore, the proposed neural network model predicted the heat transfer coefficient with great accuracy.

A review of the literature shows that in the single-phase approach, uniform concentration distribution has been used and the effects of particle migration have not been considered. In this study, nanofluid heat transfer was simulated by adding an equation to the conservation equations to consider particle migration. The effects of Brownian and thermophoretic forces have been considered in the energy equation. Moreover, a model is proposed for prediction of convective heat transfer coefficient.

This paper aims to deal with the study of heat and mass transfer on double-diffusive three-dimensional hydromagnetic boundary layer flow of an electrically conducting Casson nanofluid over a stretching surface. The combined effects of nonlinear thermal radiation, magnetic field, buoyancy forces, thermophoresis and Brownian motion are taken into consideration with convective boundary conditions.

Similarity transformations are used to reduce the governing partial differential equations into a set of nonlinear ordinary differential equations. The reduced equations were numerically solved using Runge–Kutta–Fehlberg fourth-fifth-order method along with shooting technique.

The impact of several existing physical parameters such as Casson parameter, mixed convection parameter, regular buoyancy ratio parameter, radiation parameter, Brownian motion parameter, thermophoresis parameter, temperature ratio parameter on velocity, temperature, solutal and nanofluid concentration profiles are analyzed through graphs and tables in detail. It is found that the solutal component increases for Dufour Lewis number, whereas it decreases for nanofluid Lewis number. Moreover, velocity profiles decrease for Casson parameter, while the Nusselt number increases for Biot number, radiation and temperature ratio parameter.

This paper is a new work related to three-dimensional double-diffusive flow of Casson nanofluid with buoyancy and nonlinear thermal radiation effect.

The purpose of this paper is to address the impact of gravity induced stretching flow of second grade liquid subject to thermal radiation. The flow is generated by the stretching of an impermeable cylinder. Stagnation point flow is considered. Convective type boundary conditions are applied on temperature and concentration. The present investigation further includes the aspects of magnetohydrodynamics, Joule heating, chemical reaction and viscous dissipation and heat generation/absorption.

The ordinary differential expressions are formed using suitable similarity transformations from the governing partial differential expressions. The subsequent nonlinear ordinary differential expressions are solved analytically using homotopy concept to report the consequences of different dimensionless physical parameters in graphical and tabular forms.

The results witnessed that increasing values of curvature parameter corresponds to higher temperature and concentration. Besides this, the impacts of destructive and constructive chemical processes on the concentration distribution are noted opposite.

No such analysis has yet been reported.