Search results

The purpose of this paper is to explore the joint effects of different types of IT resources and top management support. Especially, the authors attempt to mainly examine a negative synergy or substitution relationship between IT infrastructure resources and CEO support, and a positive synergy or complementary relationship between IT human resources and CEO support among the large-sized enterprises.

A research model that integrates IT infrastructure resources, IT human resources, CEO support and the degree of usage of IT for business objectives (i.e. IT business spanning capability) is developed. Based on a sample of 112 large-sized enterprises, partial least squares is used to analyze the research model.

Whereas the positive moderating role of CEO support in the effectiveness of IT human resources is insignificant, CEO support and IT infrastructure resources have a substitution relationship in predicting IT business spanning capability. Furthermore, the results can explain under which conditions IT infrastructure resources insignificantly or significantly affect IT business spanning capability in large-sized enterprises. Specially, IT infrastructure resources significantly affect IT business spanning capability only when CEO support is low. Thus, in the presence of high CEO support, IT executives in large-sized enterprises should prioritize developing highly effective IT resources, such as IT human resources.

This paper highlights the joint effects of two critical IT resource types (i.e. IT infrastructure and IT human resources) and CEO support in the IT assimilation process among the large-sized enterprises, ultimately contributing to information systems theories and practices.

Although crowdsourcing has gained significant attention and is being used by numerous companies to develop new products and solve practical issues, the performance of crowdsourcing is not optimistic. The purpose of this paper is to develop a validated risk profile of crowdsourcing and investigate the relationships among different types of risks and those between risks and performance in crowdsourcing.

Based on the quantitative data collected from 136 crowdsourcing participants in China, two dimensions (i.e. social system and technical system risks) and five sub-dimensions (i.e. crowdsourcer, relationship, crowdsourcee, complexity, and requirement) of crowdsourcing risks are developed and validated. A theoretical model that integrates crowdsourcing risks and performance is developed. The technique of partial least squares is employed to assess the measurement model and test the hypotheses.

The empirical evidence determines the positive association of social system risks with technical system risks, which in turn negatively affect crowdsourcing performance. Specifically, relationship risk is positively affected by crowdsourcer and crowdsourcee risks, and these risks positively affect requirement and complexity risks. However, requirement and complexity risks negatively affect crowdsourcing performance.

This study explores the interrelationship between various risks and the relationship between risk and performance in the context of crowdsourcing by integrating risk-based view with socio-technical theory. Systematic but different risk mitigation strategies should be designed in crowdsourcing to manage risks and enhance performance.

Scholars have examined the possible relationship between information technology (IT) and organizational agility. Although the general-level effect of IT is undisputed, empirical research on how different types of IT contribute to various aspects of organizational agility remains scarce. Therefore, this study aims to propose an integrated framework of internal capability and external environment to address this research gap.

This study investigates the potential mediating effects of absorptive capacity and the moderating effects of information intensity in the IT‒agility relationship. With a dataset comprising 165 organizations in China, this work provides empirical evidence that the effects of absorptive capacity and information intensity are multifaceted and nuanced, thereby revealing the latent mechanisms of IT competency and organizational agility.

Absorptive capacity partially mediates the effects of IT knowledge and IT operations on market capitalizing agility and fully mediates their effects on operational adjustment agility. However, no direct or indirect effects of IT objects are found on both types of organizational agility. Information intensity also positively moderates the effects of IT operations and IT objects on absorptive capacity. However, no significant moderation is found with regard to IT operations.

This study provides novel insights by demonstrating clearly the different mediating roles of absorptive capacity in the relationship among various types of IT competency and diverse aspects of organizational agility. This work also underscores the moderating role of information intensity in shaping absorptive capacity through IT competency.

The purpose of this research is to investigate how critical managerial IT capabilities, such as IT business spanning capability, interact with two pivotal types of technical IT capabilities (i.e. IT flexibility and IT integration) to affect organizational agility. Especially, the authors mainly examine a positive synergy or complementary relationship between IT business spanning capability and IT flexibility and a negative synergy or substitution relationship between IT business spanning capability and IT integration.

The authors develop a research model that integrates IT flexibility, IT integration, IT business spanning capability and organizational agility. Based on a matched-pair, cross-sectional field survey of IT and business managers, they use partial least squares (PLS) to analyze this research model.

IT flexibility and IT integration have been empirically proven to be positively associated with organizational agility. Furthermore, the research results indicate a positive synergy or complementary relationship between IT business spanning capability and IT flexibility, whereas they indicate a negative synergy or substitution relationship between IT business spanning capability and IT integration with regard to organizational agility. This finding demonstrates that IT business spanning capability can differentially influence organizational agility depending on its interaction with specific technical IT capability types. In addition, the effects of IT flexibility on organizational agility are high, whereas the effectiveness of IT integration decreases in the presence of high IT business spanning capability. Each type of technical IT capability displays different effectiveness under high IT business spanning capability. Thus, appropriate technical IT capability types should be carefully deployed, and highly effective technical IT capability types, such as IT flexibility, should be prioritized under high levels of IT business spanning capability.

This research highlights the joint effects of IT business spanning capability and two pivotal types of technical IT capabilities (i.e. IT flexibility and IT integration) on organizational agility, ultimately contributing to OM theories and practices.

This study aims to simulate and test the performance of a transmitting and receiving capacitive micro-machined ultrasonic transducer (CMUT). Aimed at detecting demand of the CMUT, a matched integrated adjustment circuit was designed through analyzing processing methods of transducer’s weak echo signal.

Based on the analysis of CMUT array structure and work principle, the CMUT units are designed and the dynamic performance analysis of SIMULINK is given according to the demand of underwater detecting. A transceiver isolation circuit is used to make transmission mode and receiving mode separate. A detection circuit is designed based on the transimpedance amplifier to achieve extraction of high-frequency and weak signal.

Through experimentation, the effectiveness of the CMUT performance simulation and the transceiver integrated adjustment circuit were verified. In addition, the test showed that CMUT with 400 kHz frequency has wider bandwidth and better dynamic characteristics than other similar transducers.

This paper provides a theoretical basis and design reference for the development and application of CMUT technology.

The purpose of this study is to improve the surface electrical conductivity and corrosion resistance of AISI430 stainless steel (430 SS) as bipolar plates for direct formic acid fuel cell (DFAFC).

The niobium diffusion layers have been successfully synthesized on 430 SS substrate by the plasma surface diffusion alloying technique under different diffusion alloying time.

The surface morphology of Nb-modified 430 SS prepared under the diffusion alloying time of 2 h is more homogeneous, relatively sleek and compact without surface micropore and other common surface blemishes. The potentiostatic and potentiodynamic polarization measurements manifest that Nb-modified 430 SS prepared under the diffusion alloying time of 2 h enormously ameliorate the corrosion resistance of bare 430 SS compared with other Nb-modified 430 SS samples and its corrosion current density is maintained at −1.4 µA cm⁻² in simulated anodic environment of DFAFC (0.05 M H₂SO₄ + 2 ppm HF + 10 M formic acid at 50 °C).

The effect of diffusion alloying time on the corrosion resistance and surface conductivity of Nb-modified 430 SS has been carefully studied. The Nb-modified 430 SS samples prepared at the diffusion alloying time of 2 h have the best surface electrical conductivity and corrosion resistance in the simulated anodic environment of DFAFC.

Laser cladding has been used in the field of repairing damaged parts of machine tools due to its advantages of less processing restrictions and easy formation of a good metallurgical bond with the base material. However, the mechanical properties of the coating sometimes cannot meet the process requirements. Therefore, the purpose of this paper is to prepare coatings with high microhardness and flexural strength.

The YCF102 alloy powder was mixed with different contents of Co and tested for laser cladding on AISI 1045 substrate under the same process parameters. The main phase composition of the coating was revealed by the XRD results. The main chemical composition of the coating was determined by the SEM and EDS results. In addition, the effect of Co content on the microstructure, microhardness and flexural strength of the coatings was investigated.

The results show that when the Co content is 2 wt% and 4 wt%, Co does not form compounds with other elements, but is uniformly distributed in the coating. And when the Co content is 6 wt% and 8 wt%, the Co reacts with Fe in the coating and generates Co₃Fe₇ in situ. The increase in Co did not result in a monotonic change in microhardness, but significantly improved the flexural strength and the flatness of the microstructure of the coating. When the Co content of the mixed powder is 8 wt%, the coating has high microhardness and flexural strength.

Co/YCF102 composite coating with high microhardness and flexural strength was prepared. This paper provides a theoretical and practical basis for research in the area of repairing damaged parts of machine tools by laser cladding.

The traction behaviours of lubricating oil significantly affect the stability and lubrication regime of aviation high-speed ball bearings. Rolling elements will slide at a low traction force (TF). Therefore, traction behaviours need to be studied, and a fitting expression for traction curves to rapidly calculate the traction coefficient (TC) should be developed.

The traction behaviours of an aviation lubricating oil were studied in severe operating conditions with a self-designed two-disc testing rig. Based on the least squares method and the Levenberg–Marquardt theory, a rapid calculation expression was developed by fitting the obtained traction curves. The correction of this expression was experimentally verified by comparing the TCs under different operating conditions. This expression was also used to modify the commonly accepted quasi-dynamic model of rolling bearings.

An increase of the load led to an increase in the TC. In comparison, the temperature and entrainment speed showed inverse effects. The proposed expression exactly predicted the trend of the experimentally acquired traction curve. The calculation with the modified dynamic model showed that the action of the TF on a single rolling element varied and that the temperature increase of the outer raceway is higher than the inner raceway, which is caused by the TF and relative sliding speed between the elements and raceways.

The proposed fitting expression is able to simplify the TC calculation of synthetic aviation lubricating oil in practical engineering applications. This paper can provide an important reference for the traction behaviour of synthetic aviation lubricating oil under severe conditions and assist with its rapid calculation and practical application in engineering.

This paper aims to improve the tribological performance of grease-lubricated spherical plain bearings (SPBs) under heavy load, dimple-type textures were prepared by laser on the outer surface of the inner ring. The influence of roughness parameters of a textured surface on reducing friction coefficient and temperature rise was also explored.

This study adopts a laser processing method to fabricate dimple-type textures. Three-dimensional roughness parameters were used to characterize the textured surfaces. The friction coefficients of five SPBs with surface texture and one original commercially available SPB without surface texture under different nominal loads were measured on a self-established test rig. The data of temperature rise were obtained by nine embedded thermal couples.

The results indicate that SPBs with textures generally exhibit lower friction coefficients than the original SPB without textures. The dimple depth has a significant influence on improving the tribological performance, which coincides with the analysis by surface roughness parameters. A textured surface with negative Ssk and high Vvc has the minimum temperature rise.

As it is too difficult to arrange sensors into heavy-load SPBs, there are few reports about the temperature characteristics. Through nine embedded thermal couples, the distribution of temperature rise on the inner ring of SPBs was given in this study. The positive effect of surface texture on reducing temperature rise and friction coefficient was verified, which is beneficial for the design of heavy-load SPBs.

Because of the small size and high integration of capacitive micromachined ultrasonic transducer (CMUT) component, it can be made into large-scale array, but this lead to high hardware complexity, so the purpose of this paper is to use less elements to achieve better imaging results. In this research, an optimized sparse array is studied, which can suppress the side lobe and reduce the imaging artifacts compared with the equispaced sparse array with the same number of elements.

Genetic algorithm is used to sparse the CMUT linear array, and Kaiser window apodization is added to reduce imaging artifacts, the beam pattern and peak-to-side lobe ratio are calculated, point targets imaging comparisons are performed. Furthermore, a 256-elements CMUT linear array is used to carry out the imaging experiment of embedded mass and forearm blood vessel, and the imaging results are compared quantitatively.

Through the imaging comparison of embedded mass and forearm blood vessel, the feasibility of optimized sparse array of CMUT is verified, and the purpose of reducing the hardware complexity is achieved.

This research provides a basis for the large-scale CMUT array to reduce the hardware complexity and the amount of calculation. At present, the CMUT array has been used in medical ultrasound imaging and has huge market potential.