Search results

Heating, ventilating, air-conditioning and cooling (HVAC) systems are crucial in daily health-care facility services. Design-related defects can lead to maintenance issues, causing service disruptions and cost overruns. These defects can be avoided if a link between the early design stages and maintenance feedback is established. This study aims to use experts’ experience in HVAC maintenance in health-care facilities to list and evaluate the risk of each maintenance issue caused by a design defect, supported by the literature.

Following semistructured interviews with experts, 41 maintenance issues were identified as the most encountered issues. Subsequently, a survey was conducted in which 44 participants evaluated the probability and impact of each design-caused issue.

Chillers were identified as the HVAC components most prone to design defects and cost impact. However, air distribution ducts and air handling units are the most critical HVAC components for maintaining healthy conditions inside health-care facilities.

The unavailability of comprehensive data on the cost impacts of all design-related defects from multiple health-care facilities limits the ability of HVAC designers to furnish case studies and quantitative approaches.

This study helps HVAC designers acquire prior knowledge of decisions that may have led to unnecessary and avoidable maintenance. These design-related maintenance issues may cause unfavorable health and cost consequences.

In order to better optimize the internal management system of book publishing and to cope with the changes in the external market environment, the purpose of this paper is to carry out cross-border publishing with the help of a transmedia storytelling model to realize the transformation and upgrading of the industry. Focusing on the relationship between the book publishing transmedia storytelling model and business performance, the moderating effect of the innovation environment on different variables is assessed.

This paper proposes several feasible hypotheses based on existing research. The research data came from 365 managers of Chinese book publishing organizations, and the scale was validated by Cronbach’s a, composite reliability (CR) and average variance extracted (AVE). Reliability and validity were verified, and correlation and regression analyses were used to test the impact of the book publishing transmedia storytelling model on business performance and to analyze the moderating role of the innovation environment.

The results show that the book publishing transmedia storytelling model (content production, technology integration, organizational innovation, marketing integration) helps to improve business performance (market performance, financial performance), and the innovation environment has a positive moderating effect on the relationship between the book publishing transmedia storytelling model and business performance, which provides a guarantee for the transformation and upgrading of book publishing. The market information reflected in the innovation environment has a certain role in promoting the innovation and business performance of the book publishing transmedia storytelling model.

The empirical evidence provides a theoretical link between the book publishing transmedia storytelling model and business performance, but there are still some shortcomings, and more factors, such as equity structure, government subsidies and research and development investment, should be included in future research. In addition, the scope of the research should be broadened on this basis to make the results of the data analysis more objective.

This paper introduces the transmedia storytelling model and deeply analyzes the relationship between the book publishing transmedia storytelling model and business performance, which is of great practical significance for optimizing the application and service quality of book publishing, prolonging the industrial chain, enhancing the interaction and participation of users and perfecting the business management system of the book publishing industry.

The application and research of the book publishing transmedia storytelling model are imperfect. Therefore, this paper not only helps to promote the innovation of book publishing organizational structure and improve the management system of business performance, but also may help to improve the innovation environment of book publishing enterprises and promote the diversification of industrial structure.

This paper aims to present a novel lightweight distribution grid operating robot system with focus on lightweight and multi-functionality, aiming for autonomous and live-line maintenance operations.

A ground-up redesign of the dual-arm robotic system with 12-DoF is applied for substantial weight reduction; a dual-mode operating control framework is proposed, with vision-guided autonomous operation embedded with real-time manual teleoperation controlling both manipulators simultaneously; a quick-swap tooling system is developed to conduct multi-functional operation tasks. A prototype robotic system is constructed and validated in a series of operational experiments in an emulated environment both indoors and outdoors.

The overall weight of the system is successfully brought down to under 150 kg, making it suitable for the majority of vehicle-mounted aerial work platforms, and it can be flexibly and quickly deployed in population dense areas with narrow streets. The system equips with two dexterous robotic manipulators and up to six interchangeable tools, and a vision system for AI-based autonomous operations. A quick-change tooling system ensures the robot to change tools on-the-go without human intervention.

The resulting dual-arm robotic live-line operation system robotic system could be compact and lightweight enough to be deployed on a wide range of available aerial working platforms with high mobility and efficiency. The robot could both conduct routine operation tasks fully autonomously without human direct operation and be manually operated when required. The quick-swap tooling system enables lightweight and durable interchangeability of multiple end-effector tools, enabling future expansion of operating capabilities across different tasks and operating scenarios.

Management of power distribution companies (discoms) in India has been historically criticized on the ground of inefficient management. Inefficiency in operations triggered management by private franchisees for promotion of managerial and technical expertise. However, franchise contracts have achieved mixed outcomes despite the business model being a decade old in the Indian power distribution sector. Therefore, this study sheds light on the drivers of discoms (principal) with the franchisees (agent) for the achievement of the common performance goals, highlighting the agency issues at multiple levels across the organizational hierarchies. The study seeks to acknowledge the commonalities and differences between and across varying levels.

A qualitative embedded single case study was conducted in an Indian state, namely Odisha. The study was built on archival analysis, personal observations and semi-structured interviews with the franchisors and franchisee officials across the organization's hierarchical levels. A conceptual model based on the review of prior literature formed the set of coding and presentation for the study.

The study provides insights on factors that play a role in effective power distribution management, operational efficiency and improved financial performance through the partnership of the principal and the agent.

The study is predominantly dependent upon interviews. This paved the way for the limitation of human biases. Additionally, deep insights were drawn from a single case study of a discom's decision to hire franchisees. However, this was at the cost of the number of organizations interviewed. The findings of the study could be built across other areas or nations.

There is adequate literature on franchising as a business model. However, literature is lacking in highlighting the commonalities and differences between different contracting parties and their impact on the performance of the contract. Additionally, there is a dearth of literature on franchising in the power distribution sector. Therefore, studying the model from multiple perspectives would contribute to the literature on the power sector and franchising.

This study aims to minimize the transportation-related cost in distribution while utilizing a heterogeneous fixed fleet to deliver distinct demand at different geographical locations with a proper workload balancing approach. An increased cost in distribution is a major problem for many companies due to the absence of efficient planning methods to overcome operational challenges in distinct distribution networks. The problem addressed in this study is to minimize the transportation-related cost in distribution while using a heterogeneous fixed fleet to deliver distinct demand at different geographical locations with a proper workload balancing approach which has not gained the adequate attention in the literature.

This study formulated the transportation problem as a vehicle routing problem with a heterogeneous fixed fleet and workload balancing, which is a combinatorial optimization problem of the NP-hard category. The model was solved using both the simulated annealing and a genetic algorithm (GA) adopting distinct local search operators. A greedy approach has been used in generating an initial solution for both algorithms. The paired t-test has been used in selecting the best algorithm. Through a number of scenarios, the baseline conditions of the problem were further tested investigating the alternative fleet compositions of the heterogeneous fleet. Results were analyzed using analysis of variance (ANOVA) and Hsu’s MCB methods to identify the best scenario.

The solutions generated by both algorithms were subjected to the t-test, and the results revealed that the GA outperformed in solution quality in planning a heterogeneous fleet for distribution with load balancing. Through a number of scenarios, the baseline conditions of the problem were further tested investigating the alternative fleet utilization with different compositions of the heterogeneous fleet. Results were analyzed using ANOVA and Hsu’s MCB method and found that removing the lowest capacities trucks enhances the average vehicle utilization with reduced travel distance.

The developed model has considered both planning of heterogeneous fleet and the requirement of work load balancing which are very common industry needs, however, have not been addressed adequately either individually or collectively in the literature. The adopted solution methodologies to solve the NP-hard distribution problem consist of metaheuristics, statistical analysis and scenario analysis are another significant contribution. The planning of distribution operations not only addresses operational-level decision, through a scenario analysis, but also strategic-level decision has also been considered.

The planning of distribution operations not only addresses operational-level decisions, but also strategic-level decisions conducting a scenario analysis.

This paper aims to examine the determinants of the dividend distribution policy in a banking setting.

Using a sample of 48 Islamic banks and 94 conventional banks from 15 Islamic countries over a period spanning from 2012 to 2019, we document the effect of board gender diversity, executive director profile and governance mechanisms on dividend payment decisions. We also analyze the moderating effect of Islamic banks on the relationship between gender diversity and dividend policy.

We find new evidence on the role of women directors in determining dividend distribution policy and confirm the risk aversion hypothesis, hence contributing to the ongoing debate on gender diversity literature. Our results show that the moderating role of Islamic banks is effective only for small banks.

Our findings have practical implications for shareholders, managers and financial analysts as they suggest rationalizing dividend distribution strategies.

Our study contributes to the growing body of knowledge on dividend policy, gender diversity and Islamic banks.

This study is exploratory in nature and designed to address poorly documented issues in the literature. The dimensions of regional distribution or spatial organisation of Industry 4.0 (I4.0), including the potential role of clusters, have only recently been addressed, with most available studies focusing on advanced, mainly Western European countries. Although developing fast, the literature on I4.0 in other countries, such as the Central and Eastern European or post-transition economies like Poland, needs to pay more attention to the spatial distribution or geographical and organisational aspects. In response to the identified knowledge gap, this paper aims to identify the role of clusters in the transformation towards I4.0. This explains why clusters may matter for advancing the fourth digital transformation, how advanced in implementing I4.0 solutions are the residents of Polish clusters and how they perceive the advantages of cluster membership for such implementation. Finally, it seeks to formulate policy recommendations based on the evidence gathered.

The methodology used in this study combines quantitative analysis of secondary data from a cluster benchmarking survey with a case study approach. The benchmarking survey, conducted by the polish agency for enterprise development in 2021, gathered responses from 435 cluster members and 41 cluster managers, representing an estimated 57% of the current clusters in Poland. In addition to quantitative analysis, a case study approach was used, incorporating primary sources such as interview with cluster managers and surveys of cluster members, as well as secondary sources like company documents and information from cluster organisation websites. Statistical analysis involved assessing the relationship between technology implementation and the adoption of management systems, as well as exploring potential correlations between technology use and company characteristics such as revenue, export revenue share and number of employees using Pearson correlation coefficient.

In Poland, implementing I4.0 technologies by cluster companies is still modest. The cluster has influenced the use of I4.0 technologies in 23% of surveyed companies. Every second surveyed company declared a positive impact of a cluster on technological advancement. The use of I4.0 technologies is not correlated with the revenue of clustered companies. A rather bleak picture emerges from the results, revealing a need for more interest among cluster members in advancing I4.0 technologies. This may be due to a comfortable situation in which firms still enjoy alternative competitive advantages that do not force them to seek new advanced advantages brought about by I4.0. It also reflects the sober approach and awareness of associated high costs and necessary investments, which are paramount and prevent successful I4.0 implementation.

The limitations inherent in this study reflect the scarcity of the available data. This paper draws on the elementary survey administered centrally and is confined by the type of questions asked. The empirical section focuses on an important, though only one selected sector of the economy – the automotive industry. Nevertheless, the diagnosis of the Polish cluster’s role in advancing I4.0 should complement the existing literature.

The exploratory study concludes with policy recommendations and sets the stage for more detailed studies. Amidst the research’s limitations, this study pioneers a path for future comprehensive investigations, enabling a deeper understanding of Polish clusters’ maturity in I4.0 adoption. By comparing the authors’ analysis of the Polish Automotive Group (PGM) cluster with existing literature, the authors uncover a distinct disparity between the theoretical prominence of cluster catalysis and the current Polish reality. Future detailed dedicated enquiries will address these constraints and provide a more comprehensive map of Polish clusters’ I4.0 maturity.

This study identifies patterns of I4.0 implementation and diagnoses the role of clusters in the transformation towards I4.0. It investigates how advanced is the adoption of I4.0 solutions among the residents of Polish clusters and how they perceive the advantages of cluster membership for such transformation. Special attention was paid to the analysis of the automotive sector. Comparing the conclusions drawn from the analysis of the Polish PGM cluster in this case study to those from the literature on the subject, it becomes clear that the catalytic role of clusters in the implementation of I4.0 technologies by enterprises, as emphasised in the literature, is not yet fully reflected in the Polish reality.

The purpose of this study is to understand how and why consumers engage in market-shaping activities on behalf of firms.

This study uses a combination of archival, netnographic and interview methods to examine how consumers responded to the entry of Tesla into the U.S. automotive market.

Consumers are driven to engage in supportive institutional work by the culturally resonant ideologies embodied in Tesla’s strategic orientation. This work takes both discursive and practical forms and sees consumers adopting responsibilities typically associated with other actors, including activists and sales professionals.

In developing an account of an understudied phenomenon – consumers’ firm-supportive market shaping – this research extends theorization around institutional work and cultural branding.

This chapter aims to critically analyse the implications that the national protectionist policies have on the global supply and value chains and the relocation of production. The analysis is based on the assumptions that the global economy is facing the possibility of decoupling of many trade connections, and this trend favours de-globalisation processes that have long been promoted by populism, nationalism and economic protectionism. It is concluded that global supply, production and value chains although being economically efficient are no longer any more secure under national protectionist policies, and therefore, the relocation of production processes is mainly due to the increase in the level of income and wages of the developing countries that are the destination and which reduce the advantages to relocate.

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.