Search results
1 – 10 of over 6000Mohammad-Reza Saffari, Mehdi Kamali Dolatabadi, Abosaeed Rashidi and Mohammad Esmail Yazdanshenas
One of the recent applications of fabrics is to use them for sound insulation. Accordingly, due to their low production cost and low relative density, fabrics have drawn attention…
Abstract
Purpose
One of the recent applications of fabrics is to use them for sound insulation. Accordingly, due to their low production cost and low relative density, fabrics have drawn attention in some of the industries such as the automotive and aircraft industries. The present study is aimed to investigate the effects of the fiber cross-section, porosity, thickness of samples and fuzzing of the knitted fabric on the sound absorption coefficient.
Design/methodology/approach
In the present study, fabrics with three different stitch densities were knitted by yarns consist of three different forms of fiber cross-section shapes (circular, elliptical and plus-shaped). In this work, the sound absorption coefficient of knitted fabrics was investigated with regard to the different fiber cross-sections and structural parameters using an impedance tube.
Findings
As indicated by the obtained results, the cross-section, porosity, thickness and mass per unit area of the fabrics were the determinant factors for the sound absorption coefficient. In addition to, the sound absorption coefficient and porosity were shown to have an inverse relationship.
Originality/value
A section of the present paper has been allocated to the investigation of the effect of the fiber cross-section and fuzzing of fabric on the sound absorption of plain knitted fabrics.
Details
Keywords
Abstract
Purpose
The purpose of this paper is mainly to know: (1) the sound absorption coefficient of porous composite structures constituted by a new kind of lightweight ceramic foam and perforated plate; (2) the availability of an equivalent porous material model, recently proposed by the present author, to these composite structures in sound absorption.
Design/methodology/approach
A kind of lightweight ceramic foam with bulk density of 0.38–0.56 g·cm-3 was produced by means of molding, drying and sintering. The effect of stainless steel perforated plate on sound absorption performance of the ceramic foam was investigated by means of JTZB absorption tester.
Findings
The results indicate that the sound absorption performance could be obviously changed by adding the stainless steel perforated plate in front of the porous samples and the air gap in back of the porous samples. Adding the perforated plate to the porous sample with a relatively large pore size, the sound absorption performance could be evidently improved for the composite structure. When the air gap is added to the composite structure, the first absorption peak shifts to the lower frequency, and the sound absorption coefficient could increase in the low frequency range.
Originality/value
Based on the equivalent porous material model and the “perforated plate with air gap” model, the sound absorption performance of the composite structures can be simulated conveniently to a great extent by using Johnson-Champoux-Allard model.
Details
Keywords
Gabriel Węcel, Ziemowit Ostrowski and Pawel Kozołub
The purpose of this paper is to present a new approach of evaluation of the absorption line black body distribution function (ALBDF) for a mixture of gases. Currently published…
Abstract
Purpose
The purpose of this paper is to present a new approach of evaluation of the absorption line black body distribution function (ALBDF) for a mixture of gases. Currently published correlations, which are used to reproduce the ALBDF, treat only single gases.
Design/methodology/approach
A discrete form of the ALBDF is generated using line by line (LBL) calculations. The latest spectroscopic database HITEMP 2010 is used for the generation of the absorption coefficient histogram, which is cumulated later in order to produce a tabulated form of the ALBDF. The proper orthogonal decomposition (POD) statistical method is employed for the reproduction of the ALBDF. Interpolation property of the POD allows to reproduce the ALBDF for arbitrary gas mixture parameters.
Findings
POD proved to possess optimal interpolation properties. Results obtained by using POD are in very good agreement with LBL integration.
Research limitations/implications
One have to be aware that the model generated with the POD method can be used only within the range of parameters used to build the model. The POD does not perform any property extrapolation. The model is limited to a mixture of two gases, namely CO2 and H2O. Expanding the number of gases used in the mixture may lead to a relatively large matrix system, which is difficult to process with the POD approach.
Practical implications
The presented approach can be used to produce absorption coefficients values and their weights, which can be applied in the gas radiative properties description using the weighted sum of gray gas (WSGG) concept. The proposed model can be used with any radiative transfer equation solver which employs the WSGG approach.
Originality/value
For the first time, radiative properties of gas mixtures are reproduced using the POD approach.
Details
Keywords
Shariful Islam and Shaikh Md. Mominul Alam
The purpose of this paper is to investigate the acoustic properties of needle-punched nonwovens produced of bamboo, banana and hemp fibers blended with polyester (PET) and…
Abstract
Purpose
The purpose of this paper is to investigate the acoustic properties of needle-punched nonwovens produced of bamboo, banana and hemp fibers blended with polyester (PET) and polypropylene (PP) as they are supportive enough to minimize sound transmission inside the automobiles.
Design/methodology/approach
Textile materials like bamboo, banana and hemp blended with PET and PP in the ratio of 35:35:30 were applied to make the web. The needle-punching technique was applied to each web for three times to form a full nonwoven textile composite. The concept of PET/PP blend with natural fibers was to enhance the consistency and thermoform propensity of the composites. When nonwoven textile composites were placed in between a sound source and a receiver, they absorbed annoying sound by dissolving sound wave energy. Sound absorption coefficient was measured by the impedance tube method as per ASTM C384 Standard. Bamboo/PET/PP composite showed the highest absorption coefficient in most of the frequencies.
Findings
Physical and comfort properties were tested for the composites and it was noticed that bamboo/PET/PP composites with its compressed structure showed a better stiffness value, lesser thermal conductivity, lesser air permeability, better absorption coefficient and highest sound transmission loss compared to other two composites. At 840 Hz, the absorption coefficient of bamboo/PET/PP remained in satisfactory level but it was inferior by 20 percent in banana/PET/PP. Conversely at more frequencies like 1,680 Hz, there was a decrease from the target level in all the nonwovens composites, which could be enhanced by raising the thickness of the nonwovens, and all these properties of bamboo/PET/PP were considered appropriate for controlling noise inside the vehicles.
Practical implications
This research will provide facilities to decrease noise inside the vehicles. It will improve the apparent value of the automobiles to the traveler and also provide a sensible goodwill to the manufacturer.
Originality/value
This research will open several ways for the development of different nonwoven composites, particularly for the sound absorption and will open possible ways for the scholars to further study in this field.
Details
Keywords
The purpose of this paper is to provide an optimization schedule of structural parameters for the sound absorption performance of a cellular ceramic foam in the sound frequency…
Abstract
Purpose
The purpose of this paper is to provide an optimization schedule of structural parameters for the sound absorption performance of a cellular ceramic foam in the sound frequency range of 200–4,000 Hz.
Design/methodology/approach
The cellular ceramic foam with porosity of about 60–75% and the pore size of about 1–7 mm was successfully prepared by using natural zeolite powder as the main raw material. For this ceramic foam, the sound absorption performance was measured, and the absorption structure was optimized by some important structural parameters. With orthogonal experiment, optimization of structural parameters was found for absorption performance. By means of the range analysis method, the main factor is known to influence the performance of ceramic foam.
Findings
The present ceramic foam may have good absorption performance although at relatively low frequencies of 400–4,000 Hz while structural parameters of sample are appropriately combined. With orthogonal experiment, optimization of structural parameters for the absorption performance was found to be as follows: sample thickness, 25 mm; porosity, 73.5%; pore size, 4–5 mm and air gap depth, 20 mm. To influence the performance, sample thickness is the main factor, air gap depth is the second and both of pore size and porosity would have a relatively slight effect.
Originality/value
This paper presents a method to optimize the structural parameters of a cellular ceramic foam for sound absorption performance by means of orthogonal experiment.
Details
Keywords
There is no clear answer to the question as to what kind of humic substances (HSs) (fulvic acids (FAs) or humic acids (HAs)) is primarily responsible for colour of water in water…
Abstract
Purpose
There is no clear answer to the question as to what kind of humic substances (HSs) (fulvic acids (FAs) or humic acids (HAs)) is primarily responsible for colour of water in water bodies. To resolve this problem, the purpose of this paper is to compare optical properties of the samples of river water with solutions (considered as standard) containing HAs and FAs in different concentrations.
Design/methodology/approach
The author sampled two typical unpolluted rivers of Karelian Isthmus (Leningrad Region, North-Western Russia) with different water colours – Vyun with light-brown water and Kivioja with dark-brown water.
Findings
It is revealed that the shape of the light absorption curve for both rivers is similar to that of FAs. Among the coefficients,
Practical implications
The results outline a more direct approach to decision support in the sphere of ecological monitoring of river water.
Originality/value
The author has concluded that river waters are coloured by FAs.
Details
Keywords
Hemalata Jena and Abinash Panigrahi
Here, attempts have been made to explore the possible use of Marine waste as filler materials into the bio-fibre composites. Clam shell is a type of marine waste which belongs to…
Abstract
Purpose
Here, attempts have been made to explore the possible use of Marine waste as filler materials into the bio-fibre composites. Clam shell is a type of marine waste which belongs to the class of Bivalvia. It is mainly made of aragonite crystalline polymorphs. This paper aims to develop a new class of natural fibre composite in which jute fibre as reinforcement, epoxy as matrix and clam shell, as particulate microsphere filler. The study investigates the effects of different amounts of clam shell powder on the kinetics of water absorption of jute fibre-reinforced epoxy composite. Two different environmental conditions at room temperature, i.e. distilled water and seawater, are collected for this purpose. Moisture absorption reduces when clam shell is added to the jute-epoxy composite. The curve of water absorption of jute-epoxy composites with filler loading at both environmental conditions follows as Fickian behaviour.
Design/methodology/approach
Hand lay-up technique to fabricate the composite – Experimental observation
Findings
The incorporation of Clam shell filler in jute epoxy composite modified the water absorption property of the composite. Hence the present marine waste is an potential filler in jute fibre reinforced polymer composite.
Originality/value
The paper demonstrates a new class hybrid composite material which uses a marine waste as important phase in the bio-fibre-reinforced composite. It is a new work submitted for original research paper.
Details
Keywords
Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Carmen Ristoscu and Ion N. Mihailescu
This paper aims to develop efficient and simple models for thermal distribution, melt pool dimensions and controlled phase change in the laser additive manufacturing (AM) of bulk…
Abstract
Purpose
This paper aims to develop efficient and simple models for thermal distribution, melt pool dimensions and controlled phase change in the laser additive manufacturing (AM) of bulk and powder particles ceramic materials.
Design/methodology/approach
This paper proposes new analytical models for the AM of bulk and powder bed ceramic materials. A volumetric moving heat source, along with the complete melting of bulk and powder particle materials, is taken into account. Different values of laser absorption coefficient in solid and liquid states have been used to investigate the phase transformation. Furthermore, the pores and voids dimensions are also included in the modeling. Theoretical predictions have been compared with the experimental analyses and finite element simulations in laser to silicon nitride and laser to alumina interaction. The analysis focuses on the impact of laser power and scanning speed on the melt pool width and depth evolution into the bulk substrate and powder bed.
Findings
This study shows that the powder particles exhibit a higher thermal distribution value than the bulk substrate because of voids in the powder layer. The laser beam experiences multiple reflections in the presence of porosity/voids, thus increasing the surface absorption coefficient, which becomes relevant with the increment in the pore/void dimension. A direct relationship has been found between the laser power and melt pool dimensions, while the scanning speed displayed an inverse relationship for the melt pool width and length. Larger melt dimensions were inferred in the case of laser–powder particle interaction compared with laser–bulk substrate interaction. A close correlation was found between the analytical simulations, experimental investigations and numerical simulation results within the range of 4%–8%.
Originality/value
This paper fulfills an identified need to develop efficient and simplified models for ceramics laser AM by taking into account different laser absorption coefficients in solid and liquid form, voids and pores dimensions and controlled phase transformation to avoid vapors and plasma formation. The limitation of the finite element simulation model is that the solution is strongly dependent on the mesh quality and accuracy directly linked to the computation efficiency and time. A finer mesh requires a longer computing time than a coarse mesh. Finite element simulations require, however, specialized skills.
Details
Keywords
The purpose of this paper is to improve the quality of additive manufactured optically translucent parts by investigating the manufacturing issues, analyzing lithophane production…
Abstract
Purpose
The purpose of this paper is to improve the quality of additive manufactured optically translucent parts by investigating the manufacturing issues, analyzing lithophane production criteria and identifying the best translucent material and additive manufacturing (AM) technology.
Design/methodology/approach
Figured lithophanes were laser sintered on a 3D Systems SinterStation® HiQ™ with varying layer thickness and plate thickness. Laser sintered (LS) polyamide (PA) 12 blanks were cyanoacrylate infiltrated and polished. Optical properties and performance were compared with the original LS blanks. Lithophanes and blanks were manufactured using 3D systems stereo lithography apparatus (SLA)® Viper ™si2 station, and optical properties and lithophane performance were compared with the LS specimens.
Findings
When building in the XY plane, it is optimal to sinter with the minimum layer thickness (0.076 mm) and maximum plate thickness (5 mm). Cyanoacrylate infiltration and polishing assists in reducing the LS PA 12 plate surface roughness, but polishing does not affect the lithophane performance. The best LS candidate should have an absorption coefficient of 0.5/mm using a white light source. Improved resolution but reduced contrast was observed on stereolithography (SL) specimens compared to LS parts.
Research limitations/implications
Transmittance experiments were performed on three SL parts which was not sufficient for optical property calculation. Limited literature was found for new material exploration.
Originality/value
It is the first effort to study systematically quality improvement issues of LS PA optically translucent parts. A comparison is made of optical performance between parts made using LS and SL.
Details
Keywords
Zhenhua Wang, Shikui Dong, Zhihong He, Lei Wang, Weihua Yang and Bengt Ake Sunden
H2O, CO2 and CO are three main species in combustion systems which have high volume fractions. In addition, soot has strong absorption in the infrared band. Thus, H2O, CO2, CO and…
Abstract
Purpose
H2O, CO2 and CO are three main species in combustion systems which have high volume fractions. In addition, soot has strong absorption in the infrared band. Thus, H2O, CO2, CO and soot may take important roles in radiative heat transfer. To provide calculations with high accuracy, all of the participating media should be considered non-gray media. Thus, the purpose of this paper is to study the effect of non-gray participating gases and soot on radiative heat transfer in an inhomogeneous and non-isothermal system.
Design/methodology/approach
To solve the radiative heat transfer, the fluid flow as well as the pressure, temperature and species distributions were first computed by FLUENT. The radiative properties of the participating media are calculated by the Statistical Narrow Band correlated K-distribution (SNBCK), which is based on the database of EM2C. The calculation of soot properties is based on the Mie scattering theory and Rayleigh theory. The radiative heat transfer is calculated by the discrete ordinate method (DOM).
Findings
Using SNBCK to calculate the radiative properties and DOM to calculate the radiative heat transfer, the influence of H2O, CO2, CO and soot on radiation heat flux to the wall in combustion system was studied. The results show that the global contribution of CO to the radiation heat flux on the wall in the kerosene furnace was about 2 per cent, but that it can reach up to 15 per cent in a solid fuel gasifier. The global contribution of soot to the radiation heat flux on the wall was 32 per cent. However, the scattering of soot has a tiny influence on radiation heat flux to the wall.
Originality/value
This is the first time H2O, CO2, CO and the scattering of soot were all considered simultaneously to study the radiation heat flux in combustion systems.
Details