Search results
1 – 10 of 32Rahul Yadav, C. Balaji and S.P. Venkateshan
The paper aims to test the spectral line-based weighted sum of gray gases (SLW) method in axisymmetric geometries with particles and high temperature gradients.
Abstract
Purpose
The paper aims to test the spectral line-based weighted sum of gray gases (SLW) method in axisymmetric geometries with particles and high temperature gradients.
Design/methodology/approach
An SLW model is coupled with Trivic’s mean wavelength approach to estimate the radiative heat fluxes at the wall of an enclosure and to the base wall of the rocket exhaust, thereby subsequently studying the effect of concentration variation of the gases and particles in these cases. Radiative transfer equation is solved using modified discrete ordinates method. Anisotropic scattering is modeled using transport approximation.
Findings
Two cases considered show the importance of particle emission and scattering in the rocket plume base heating problems. In cases involving only gases, the concentration of H2O tends to have more impact on the flux values than any other gas.
Originality/value
A full model of gases with particles in an axially varying temperature field is reported. Such cases are very common in practical applications. The present methodology gives more insight and a firm handle on the problem vis-a-vis other traditional techniques.
Details
Keywords
Akram Mazgar, Khouloud Jarray, Fadhila Hajji and Fayçal Ben Nejma
This paper aims to numerically analyze the effect of non-gray gas radiation on mixed convection in a horizontal circular duct with isothermal partial heating from the sidewall…
Abstract
Purpose
This paper aims to numerically analyze the effect of non-gray gas radiation on mixed convection in a horizontal circular duct with isothermal partial heating from the sidewall. The influence of heater location on heat transfer, fluid flow and entropy generation is given and discussed in this study.
Design/methodology/approach
The numerical computation of heat transfer and fluid flow has been developed by the commercial finite element software COMSOL Multiphysics. Radiation code is developed based on the T10 Ray-Tracing method, and the radiative properties of the medium are computed based on the statistical narrow band correlated-k model.
Findings
The obtained results depicted that the radiation considerably contributes to the temperature homogenization of the gas. The findings highlight the impact of the heater location on swirling flow. It is also shown that the laterally heating process provides better energy efficiency than heating from the top of the enclosure.
Originality/value
This study is performed to improve heat transfer and to minimize entropy generation. Therefore, it is conceivable to improve the model design of industrial applications.
Details
Keywords
Zhenhua Wang, Shikui Dong, Zhihong He, Lei Wang, Weihua Yang and Bengt Ake Sunden
H2O, CO2 and CO are three main species in combustion systems which have high volume fractions. In addition, soot has strong absorption in the infrared band. Thus, H2O, CO2, CO and…
Abstract
Purpose
H2O, CO2 and CO are three main species in combustion systems which have high volume fractions. In addition, soot has strong absorption in the infrared band. Thus, H2O, CO2, CO and soot may take important roles in radiative heat transfer. To provide calculations with high accuracy, all of the participating media should be considered non-gray media. Thus, the purpose of this paper is to study the effect of non-gray participating gases and soot on radiative heat transfer in an inhomogeneous and non-isothermal system.
Design/methodology/approach
To solve the radiative heat transfer, the fluid flow as well as the pressure, temperature and species distributions were first computed by FLUENT. The radiative properties of the participating media are calculated by the Statistical Narrow Band correlated K-distribution (SNBCK), which is based on the database of EM2C. The calculation of soot properties is based on the Mie scattering theory and Rayleigh theory. The radiative heat transfer is calculated by the discrete ordinate method (DOM).
Findings
Using SNBCK to calculate the radiative properties and DOM to calculate the radiative heat transfer, the influence of H2O, CO2, CO and soot on radiation heat flux to the wall in combustion system was studied. The results show that the global contribution of CO to the radiation heat flux on the wall in the kerosene furnace was about 2 per cent, but that it can reach up to 15 per cent in a solid fuel gasifier. The global contribution of soot to the radiation heat flux on the wall was 32 per cent. However, the scattering of soot has a tiny influence on radiation heat flux to the wall.
Originality/value
This is the first time H2O, CO2, CO and the scattering of soot were all considered simultaneously to study the radiation heat flux in combustion systems.
Details
Keywords
This paper seeks to review the literature on methods for solving the radiative transfer equation (RTE) and integrating the radiant energy quantities over the spectrum required to…
Abstract
Purpose
This paper seeks to review the literature on methods for solving the radiative transfer equation (RTE) and integrating the radiant energy quantities over the spectrum required to predict the flow, the flame and the thermal structures in chemically reacting and radiating combustion systems.
Design/methodology/approach
The focus is on methods that are fast and compatible with the numerical algorithms for solving the transport equations using the computational fluid dynamics techniques. In the methods discussed, the interaction of turbulence and radiation is ignored.
Findings
The overview is limited to four methods (differential approximation, discrete ordinates, discrete transfer, and finite volume) for predicting radiative transfer in multidimensional geometries that meet the desired requirements. Greater detail in the radiative transfer model is required to predict the local flame structure and transport quantities than the global (total) radiation heat transfer rate at the walls of the combustion chamber.
Research limitations/implications
The RTE solution methods and integration of radiant energy quantities over the spectrum are assessed for combustion systems containing only the infra‐red radiating gases and gas particle mixtures. For strongly radiating (i.e. highly sooting) and turbulent flows the neglect of turbulence/radiation interaction may not be justified.
Practical implications
Methods of choice for solving the RTE and obtaining total radiant energy quantities for practical combustion devices are discussed.
Originality/value
The paper has identified relevant references that describe methods capable of accounting for radiative transfer to simulate processes arising in combustion systems.
Details
Keywords
Ge Song, Tor Bjørge, Jens Holen and Bjørn F. Magnussen
Reports that major advances have been achieved on computational simulations of multidimensional fluid flow, heat and mass transfer during the last 20 years. Focuses on the…
Abstract
Reports that major advances have been achieved on computational simulations of multidimensional fluid flow, heat and mass transfer during the last 20 years. Focuses on the numerical prediction of fluid flow, combustion and gas radiation in a combustion chamber of a typical industrial glass‐melting furnace. Carries out the flow simulation in a three‐dimensional calculation domain by using computer models in conjunction with the standard k ‐ ε turbulence model. Tests the predictions of spectral intensity by solving the equation of radiative transfer. Employs the Goody statistical narrow band model with the Curtis‐Godson approximation to calculate radiative properties for inhomogeneous gas mixtures.
Details
Keywords
Katarzyna Stęchły, Gabriel Wecel and Derek B. Ingham
The main goal of this work was the CFD analysis of air and oxy-coal combustion, in order to develop a validated with experimental measurements model of the combustion chamber…
Abstract
Purpose
The main goal of this work was the CFD analysis of air and oxy-coal combustion, in order to develop a validated with experimental measurements model of the combustion chamber. Moreover, the purpose of this paper is to provide information about limitations of the sub-models implemented in commercial CFD code ANSYS Fluent version 13.0 for the oxy-coal combustion simulations. The influence of implementation of the weighted sum of gray gas model (WSGGM) with coefficients updated to oxy-coal combustion environment has been investigated.
Design/methodology/approach
The sub-models validated with experimental measurements model for the air combustion has been used to predict the oxy-coal combustion case and subsequently the numerical solutions have been compared with the experimental data, which enclose the surface incident radiation (SIR) and the flue gas temperature. To improve the numerical prediction of the oxy-coal combustion process the own routine for calculating properties of the oxy-combustion product has been implemented.
Findings
The results of numerical simulation of combustion in the air environment fitted within the experimental measurements accuracy. However, the air combustion sub-models implemented for the oxy-coal combustion simulations does not predict the SIR within the experimental data accuracy. The implementation of own routine, which uses the coefficients calculated for oxy-coal combustion environment shows improvement in numerical prediction of oxy-coal combustion.
Originality/value
The radiative properties of gases in the combustion chamber during oxy-coal combustion calculated using the WSGGM implemented in ANSYS Fluent 13.0 do not predict the SIR within experimental measurement accuracy, however, implementation of WSGGM with updated coefficients provide a reasonable improvement in numerical prediction of SIR in the oxy-coal combustion.
Details
Keywords
The aim of this article is to present the results of a parametric analysis of the entropy generation due to mixed convection in the entry‐developing region between two…
Abstract
Purpose
The aim of this article is to present the results of a parametric analysis of the entropy generation due to mixed convection in the entry‐developing region between two differentially heated isothermal vertical plates.
Design/methodology/approach
The entropy generation was estimated via a numerical solution of the mass, momentum and energy conservation equations governing the flow and heat transfer in the vertical channel between the two parallel plates. The resultant temperature and velocity profiles were used to estimate the entropy generation and other heat transfer parameters over a wide range of the operating parameters. The investigated parameters include the buoyancy parameter (Gr/Re), Eckert number (Ec), Reynolds number (Re), Prandtl number (Pr) and the ratio of the dimensionless temperature of the two plates (θT).
Findings
The optimum values of the buoyancy parameter (Gr/Re) optimum at which the entropy generation assumes its minimum for the problem under consideration have been obtained numerically and presented over a wide range of the other operating parameters. The effect of the other operating parameters on the entropy generation is presented and discussed as well.
Research limitations/implications
The results of this investigation are limited to the geometry of vertical channel parallel plates under isothermal boundary conditions. However, the concept of minimization of entropy generation via controlling the buoyancy parameter is applicable for any other geometry under any other thermal boundary conditions.
Practical implications
The results presented in this paper can be used for optimum designs of heat transfer equipment based on the principle of entropy generation minimization with particular focus on the optimum design of plate and frame heat exchanger and the optimization of electronic packages and stacked packaging of laminar‐convection‐cooled printed circuits.
Originality/value
This paper introduces the entropy generation minimization via controlling the operating parameters and clearly identifies the optimum buoyancy parameter (Gr/Re) at which entropy generation assumes its minimum under different operating conditions.
Details
Keywords
H.S. Takhar, Rama Subba Reddy Gorla and V.M. Soundalgekar
Free convection heat transfer due to the simultaneous action ofbuoyancy, radiation and transverse magnetic field is investigated for asemi‐infinite vertical plate. Solutions are…
Abstract
Free convection heat transfer due to the simultaneous action of buoyancy, radiation and transverse magnetic field is investigated for a semi‐infinite vertical plate. Solutions are derived by expanding the stream function and the temperature into a series in terms of the parameter ζ = x1/2 L–1/2, where L is the length of the plate. Velocity and temperature functions are shown on graphs and the numerical values of functions affecting the shear stress and the rate of heat transfer are entered in a table. The effects of the magnetic field parameter λ and the radiation parameter F on these functions are discussed.
Details
Keywords
Mohamed Ibrahim N.H., M. Udayakumar, Sivan Suresh, Suvanjan Bhattacharyya and Mohsen Sharifpur
This study aims to investigate the insights of soot formation such as rate of soot coagulation, rate of soot nucleation, rate of soot surface growth and soot surface oxidation in…
Abstract
Purpose
This study aims to investigate the insights of soot formation such as rate of soot coagulation, rate of soot nucleation, rate of soot surface growth and soot surface oxidation in ethylene/hydrogen/nitrogen diffusion jet flame at standard atmospheric conditions, which is very challenging to capture even with highly sophisticated measuring systems such as Laser Induced Incandescence and Planar laser-induced fluorescence. The study also aims to investigate the volume of soot in the flame using soot volume fraction and to understand the global correlation effect in the formation of soot in ethylene/hydrogen/nitrogen diffusion jet flame.
Design/methodology/approach
A large eddy simulation (LES) was performed using box filtered subgrid-scale tensor. A filtered and residual component of the governing equations such as continuity, momentum, energy and species are resolved and modeled, respectively. All the filtered and residual components are numerically solved using the ILU method by considering PISO pressure–velocity solver. All the hyperbolic flux uses the QUICK algorithm, and an elliptic flux uses SOU to evaluate face values. In all the cases, Courant–Friedrichs–Lewy (CFL) conditions are maintained unity.
Findings
The findings are as follows: soot volume fraction (SVF) as a function of a flame-normalized length for three different Reynolds number configurations (Re = 15,000, Re = 8,000 and Re = 5,000) using LES; soot gas phase and particulate phase insights such as rate of soot nucleation, rate of soot coagulation, rate of soot surface growth and soot surface oxidation for three different Reynolds number configurations (Re = 15,000, Re = 8,000 and Re = 5,000); and soot global correction using total soot volume in the flame volume as a function of Reynolds number and Froude number.
Originality/value
The originality of this study includes the following: coupling LES turbulent model with chemical equilibrium diffusion combustion conjunction with semi-empirical Brookes Moss Hall (BMH) soot model by choosing C6H6 as a soot precursor kinetic pathway; insights of soot formations such as rate of soot nucleation, soot coagulation rate, soot surface growth rate and soot oxidation rate for ethylene/hydrogen/nitrogen co-flow flame; and SVF and its insights study for three inlet fuel port configurations having the three different Reynolds number (Re = 15,000, Re = 8,000 and Re = 5,000).
Details