Investigation of the acoustic properties of needle punched nonwoven produced of blend with sustainable fibers
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 22 June 2018
Issue publication date: 24 July 2018
Abstract
Purpose
The purpose of this paper is to investigate the acoustic properties of needle-punched nonwovens produced of bamboo, banana and hemp fibers blended with polyester (PET) and polypropylene (PP) as they are supportive enough to minimize sound transmission inside the automobiles.
Design/methodology/approach
Textile materials like bamboo, banana and hemp blended with PET and PP in the ratio of 35:35:30 were applied to make the web. The needle-punching technique was applied to each web for three times to form a full nonwoven textile composite. The concept of PET/PP blend with natural fibers was to enhance the consistency and thermoform propensity of the composites. When nonwoven textile composites were placed in between a sound source and a receiver, they absorbed annoying sound by dissolving sound wave energy. Sound absorption coefficient was measured by the impedance tube method as per ASTM C384 Standard. Bamboo/PET/PP composite showed the highest absorption coefficient in most of the frequencies.
Findings
Physical and comfort properties were tested for the composites and it was noticed that bamboo/PET/PP composites with its compressed structure showed a better stiffness value, lesser thermal conductivity, lesser air permeability, better absorption coefficient and highest sound transmission loss compared to other two composites. At 840 Hz, the absorption coefficient of bamboo/PET/PP remained in satisfactory level but it was inferior by 20 percent in banana/PET/PP. Conversely at more frequencies like 1,680 Hz, there was a decrease from the target level in all the nonwovens composites, which could be enhanced by raising the thickness of the nonwovens, and all these properties of bamboo/PET/PP were considered appropriate for controlling noise inside the vehicles.
Practical implications
This research will provide facilities to decrease noise inside the vehicles. It will improve the apparent value of the automobiles to the traveler and also provide a sensible goodwill to the manufacturer.
Originality/value
This research will open several ways for the development of different nonwoven composites, particularly for the sound absorption and will open possible ways for the scholars to further study in this field.
Keywords
Citation
Islam, S. and Mominul Alam, S.M. (2018), "Investigation of the acoustic properties of needle punched nonwoven produced of blend with sustainable fibers", International Journal of Clothing Science and Technology, Vol. 30 No. 3, pp. 444-458. https://doi.org/10.1108/IJCST-01-2018-0012
Publisher
:Emerald Publishing Limited
Copyright © 2018, Emerald Publishing Limited