Search results

In order to give full play to the function of noise reduction of asphalt pavement, it is necessary to understand its internal sound absorption mechanism. Therefore, the purpose of this study is to establish a micro model of the pore structure of asphalt mixture with the help of finite element method (FEM), discuss the noise reduction mechanism of asphalt pavement from the micro perspective and analyze and evaluate the noise attenuation law of the pore structure.

The FEM was used to establish the microscopic model of the pore structure of asphalt mixture. Based on the principle of acoustics, the noise reduction characteristics of asphalt pavement were simulated. The influence of gradation and pore characteristics on the noise reduction performance of asphalt pavement was analyzed.

The results show that the open graded friction course-13 (OGFC-13) has excellent performance in noise reduction. The resonant sound absorption structure composed of its large porosity can effectively reduce the pavement noise. For asphalt concrete-13 (AC-13) and stone matrix asphalt-13 (SMA-13), the less resonant sound absorption structure makes them have poor sound absorption effect. In addition, the variation rules of noise transmission loss (TL) curve and sound absorption coefficient curve of three graded asphalt mixtures were obtained. At the same time, the peak noise reduction values of OGFC-13, AC-13 and SMA-13 were obtained, which were 650Hz, 1000Hz and 800Hz, respectively.

The results show that the simulation results can well reflect and express the experimental results. This will provide a reference for further exploring the sound absorption mechanism and its variation rule of porous asphalt pavement. It also has some positive significance for the application of low noise asphalt pavement.

The purpose of this paper is mainly to know: (1) the sound absorption coefficient of porous composite structures constituted by a new kind of lightweight ceramic foam and perforated plate; (2) the availability of an equivalent porous material model, recently proposed by the present author, to these composite structures in sound absorption.

A kind of lightweight ceramic foam with bulk density of 0.38–0.56 g·cm-3 was produced by means of molding, drying and sintering. The effect of stainless steel perforated plate on sound absorption performance of the ceramic foam was investigated by means of JTZB absorption tester.

The results indicate that the sound absorption performance could be obviously changed by adding the stainless steel perforated plate in front of the porous samples and the air gap in back of the porous samples. Adding the perforated plate to the porous sample with a relatively large pore size, the sound absorption performance could be evidently improved for the composite structure. When the air gap is added to the composite structure, the first absorption peak shifts to the lower frequency, and the sound absorption coefficient could increase in the low frequency range.

Based on the equivalent porous material model and the “perforated plate with air gap” model, the sound absorption performance of the composite structures can be simulated conveniently to a great extent by using Johnson-Champoux-Allard model.

This paper aims to study the design and characterization of a 3D printed tetrakaidecahedron cell-based acoustic metamaterial. At present, the mitigation of low-frequency noise involves the utilization of spatially demanding materials for the absorption of sound. These materials lack the ability for targeted frequency control adjustments. Hence, there is a requirement for an approach that can effectively manage low-frequency noise using lightweight and durable materials.

The CAD model was created in SolidWorks and was manufactured using the Digital Light Processing (DLP) 3D printing technique. Experimental study and numerical simulations examined the metamaterial’s acoustic absorption. An impedance tube with two microphones was used to determine the absorption coefficient of the metamaterial. The simulations were run in a thermoviscous module.

The testing of acoustic samples highlighted the effects of geometric parameters on acoustic performance. Increment of the strut length by 0.4 mm led to a shift in response to a lower frequency by 500 Hz. Peak absorption rose from 0.461 to 0.690 as the strut diameter was increased from 0.6 to 1.0 mm. Increasing the number of cells from 8 to 20 increased the absorption coefficient and lowered the response frequency.

DLP 3D printing technique was used to successfully manufacture tetrakaidecahedron-based acoustic metamaterial samples. A novel study on the effects of geometric parameters of tetrakaidecahedron cell-based acoustic metamaterial on the acoustic absorption coefficient was conducted, which seemed to be missing in the literature.

Informed by acoustic design standards, the built environments are designed with single reverberation times (RTs), a trade-off between long and short RTs needed for different space functions. The novel intelligent passive room acoustic technology (IPRAT) has the potential to revolutionise room acoustics, thus, it is imperative to analyse and quantify its effect. IPRAT achieves real-time room acoustic improvement by integrating passive variable acoustic technology (PVAT) and acoustic scene classification (ASC). This paper aims to compare IPRAT simulation results with the AS/NZS 2107:2016 Australian/New Zealand recommended design acoustic standards.

In this paper 20 classroom environments are virtually configured for the simulation, multiplying 5 classrooms with 4 aural situations typical to New Zealand classrooms. The acoustic parameters RT, sound clarity (C50) and sound strength (G) are considered and analysed in the simulation. These parameters can be used to determine the effects of improved acoustics for both teacher vocal relief and student comprehension. The IPRAT was assumed to vary RT and was represented in the simulation by six different absorption coefficient spectrums.

The optimised acoustic parameters were derived from relationships between C50, RT and G. These relationships and optimal RTs contribute a unique database to literature. IPRAT’s advantages were discerned from a comparison of “current,” “attainable” and “optimised” acoustic parameters.

By quantifying the effect of IPRAT, it is understood that IPRAT has the potential to satisfy the key recommendations of professional industry standards (for New Zealand namely; AS/NZS 2107:2016 recommended design acoustic standards).

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

One of the recent applications of fabrics is to use them for sound insulation. Accordingly, due to their low production cost and low relative density, fabrics have drawn attention in some of the industries such as the automotive and aircraft industries. The present study is aimed to investigate the effects of the fiber cross-section, porosity, thickness of samples and fuzzing of the knitted fabric on the sound absorption coefficient.

In the present study, fabrics with three different stitch densities were knitted by yarns consist of three different forms of fiber cross-section shapes (circular, elliptical and plus-shaped). In this work, the sound absorption coefficient of knitted fabrics was investigated with regard to the different fiber cross-sections and structural parameters using an impedance tube.

As indicated by the obtained results, the cross-section, porosity, thickness and mass per unit area of the fabrics were the determinant factors for the sound absorption coefficient. In addition to, the sound absorption coefficient and porosity were shown to have an inverse relationship.

A section of the present paper has been allocated to the investigation of the effect of the fiber cross-section and fuzzing of fabric on the sound absorption of plain knitted fabrics.

Recently, the acoustic characteristics of indoor spaces have been perceived to be more important due to the economic development needs of societies. At the same time, container houses have gradually become more widely used in many applications because of their sustainability and ease of use. In spite of their convenience, these container units still need to foster pleasant and quiet sound environments. The paper aims to discuss these issues.

In this paper, commercial software, designed by Ecotect Analysis, has been used to evaluate the sound characteristics of container houses. As a result, the decorated materials in such a small indoor space have been redesigned for the acoustic comfort of users based on the optimal reverberation time (RT). First, a three-dimensional model of the container house was constructed using the software’s default tools. Then, the indoor acoustic characteristics of various design conditions were obtained from the simulation process undertaken.

By comparing the experimental and simulation results, excellent agreement was observed which verified the feasibility of the software. The original container house experienced an RT distribution of 140-315 ms. After selecting a suitable interior design material, its RT distribution was measured at 160-680 ms.

Following the design process described, spatial designers can assess the indoor acoustic characteristics at the concept design stage and ensure that a decent acoustic comfort environment is derived in their building designs. Meanwhile, such modifications should improve the quality of living for residents of container houses and construction cost reductions might be implemented.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

With the development of the modern technology and aerospace industry, the noise pollution is remarkably affecting people’s daily life and has been become a serious issue. Therefore, it is the most important task to develop efficient sound attenuation barriers, especially for the low-frequency audible range. However, low-frequency sound attenuation is usually difficult to achieve for the constraints of the conventional mass-density law of sound transmission. The traditional acoustic materials are reasonably effective at high frequency range. This paper aims to discuss this issue.

Membrane-type local resonant acoustic metamaterial is an ideal low-frequency sound insulation material for its structure is simple and lightweight. In this paper, the finite element method is used to study the low-frequency sound insulation performances of the coupled-membrane type acoustic metamaterial (CMAM). It consists of two identical tensioned circular membranes with fixed boundary. The upper membrane is decorated by a rigid platelet attached to the center. The sublayer membrane is attached with two weights, a central rigid platelet and a concentric ring with inner radius e. The influences of the distribution and number of the attached mass, also asymmetric structure on the acoustic attenuation characteristics of the CMAM, are discussed.

In this paper, the acoustic performance of asymmetric coupled-membrane metamaterial structure is discussed. The influences of mass number, the symmetric and asymmetry structure on the sound insulation performance are analyzed. It is shown that increasing the number of mass attached on membrane, structure exhibits low-frequency and multi-frequency acoustic insulation phenomenon. Compared with the symmetrical structure, asymmetric structure shows the characteristics of lightweight and multi-frequency sound insulation, and the sound insulation performance can be tuned by adjusting the distribution mode and location of mass blocks.

Membrane-type local resonant acoustic metamaterial is an ideal low-frequency sound insulation material for its structure is simple and lightweight. How to effectively broaden the acoustic attenuation band at low frequency is still a problem. But most of researchers focus on symmetric structures. In this study, the asymmetric coupled-membrane acoustic metamaterial structure is examined. It is demonstrated that the asymmetric structure has better sound insulation performances than symmetric structure.