Search results

Seeds and nuts include many dietary minerals as well as trace metals. It is very important to determine the nutritional mineral values in seeds and nuts. Many minerals can be analyzed simultaneously in low concentrations by using inductively coupled plasma-atomic emission spectroscopy. This paper aims to evaluate nutritional values of dietary and trace minerals in selected seeds and nuts.

Dietary minerals in the sunflower seed (Helianthus annuus), pumpkin seed (Cucurbita pepo L.), peanut (Arachis hypogaea) and corn (Zea mays L.) samples collected from the markets in Sakarya city of Turkey have been analyzed. Two digestion procedures were applied by using hydrochloric acid solution and the mixture of nitric acid and hydrogen peroxide solution.

In the evaluation of the mineral contributions of the nuts, the micro-mineral contributions (Cu, Fe, Zn, Mn and Se) were found at higher values than the macro-minerals (Ca, Mg, K and Na). Potassium was determined as the most abundant mineral, and sodium was found at lower levels. The results showed that nuts are trace mineral suppliers and possible Na-K regulator foods in human nutrition.

The obtained results for the mineral profile and daily intake values provide useful information that could sensitize the people on the consumption of seeds and nuts.

Findings from the digestion procedures and the assessments based on the recommended daily intakes have got valuable impact.

The present study aims to determine the proximate and mineral composition of important coldwater food fishes in the North Eastern Indian upland region to assess their nutritional quality.

The paper is of original work and the analyses were performed using AOAC (1990). Data were analyzed by one-way analysis of variance (ANOVA) and determined by Duncan’s Multiple Range Test using SPSS (Version 19).

Crude protein levels ranged from 16-20 per cent, crude fat (CF) 9.60-1.54 per cent and ash 3.5-0.99 per cent. Moisture content was in the range of 71-78 per cent. The lowest moisture content was observed in Semiplotus semiplotus and highest in Labeo dero. Sodium, potassium and calcium content ranged from 92-309, 692-1435, 467-2021 mg/100g, respectively. Maximum concentration of potassium was found in Labeo dero followed by Labeo pangusia. Selenium was most abundant in L. dero, Labeo dyocheilus, Sanguina sanguine, Barilius bendelisis, Garra mullya, L. pangusia and Neolissochilus hexagonolepis. The maximum level of iron was evidenced in Tor tor.

The results obtained revealed that all the ten studied fishes are rich sources of nutrients including protein, macro and micro-minerals, which will be a healthy addition to human diet and will act as a ready reference for the nutritionists and other stakeholders.

The purpose of the paper is to study the effects of cooking on proximate composition, amino acids, fatty acids, minerals and total, heme and non‐heme iron content of camel meat.

A total of ten longissimus thoracis muscles (500 grams) were collected between the tenth and twelfth ribs of the left side. Samples were randomly collected from two to three year old camel carcasses chilled (1‐3°C) for 48 hours then stored at −20°C. The first portion was kept fresh while the second one was placed in plastic bags and cooked by immersion in a water bath at 70°C for 90 minutes. Both samples were freeze‐dried, and then ground to a homogeneous mass to be used for chemical analyses.

Cooked samples had significantly (p<0.05) higher dry matter by 27.7 per cent, protein by 31.1 per cent and fat by 22.2 per cent, but lower ash content by 8.3 per cent than the raw ones. Cooking had no significant effect on amino acid and fatty acid composition of the meat. The components of camel meat most significantly affected by cooking were macro‐ and micro‐minerals, which ranged between 13.1 and 52.5 per cent, respectively. Cooking resulted in a significant decrease in total, heme and non‐heme iron contents by 4.3, 8.7 and 4.0 per cent, respectively.

The research is restricted to camel meat but it is an exploratory study. The issue of research outcome as only longissimus thoracic muscle is another limitation. Further investigation is needed to include different muscles, temperatures, durations and cooking methods.

Amino acids and fatty acids of camel meat are not affected by cooking, while heating accelerated total and heme iron oxidation suggest camel meat to be a rich source of heme iron.

The paper is original in its findings and useful for both researchers and academics in the field of meat science.

Levels of the selected major and minor elements (Na, K, Ca, Mg, Ni, Cr, Cd, Pb, Zn and Fe) in 11 summer fruits grown in Pakistan were estimated by the flame AAS method based on HNO₃/HClO₄ wet‐digestion method. The metal concentrations are expressed as X for triplicate sub‐samples with a standard deviation of ±1.0‐1.5 per cent. Of all the minor elements analyzed, Fe was found to be the dominant metal on mean basis as compared with other metals in fruits, its concentration being 14.25mg/kg. The increasing order of minor‐element concentration was: Cd<Pb<Zn<Cr<Ni<Fe. While for major elements, K concentration was found to be maximum as 409.7mg/kg and increasing order was: Ca<Na<Mg<K. In general, minor‐element concentrations were found to surpass the safe limit laid down by the World Health Organization. Fruits were found to be a rich resource of major elements.

The purpose of this paper is to review the nutritional and food value of pumpkin Cucurbita, along with different health benefits. Cucurbita (pumpkin) is an herbaceous vine, member of Cucurbitaceae family. It is an edible, heat-sensitive plant, which has an abundant amount of active compounds such as carotenoids, alkaloids, flavonoids, polyphenols, tannins, tocopherols, phytosterols and cucurbitacin, accounted for numerous health benefits, namely, antidiabetic, antioxidant, anticarcinogenic, hypotensive, hyper protective activities.

Major well-known bibliometric information sources such as Web of Science, Scopus, Mendeley and Google Scholar were searched with keywords such as nutrition value of Cucurbita, Cucurbita utilization, bioactive compounds of pumpkin, health benefits, processing, food formulations and current scenarios were chosen to obtain a large range of papers to be analyzed. A final inventory of 105 scientific sources was made after sorting and classifying them according to different criteria based on topic, academic field, country of origin and year of publication.

The comprehensive review of different literature, data sources and research papers seeks to find and discuss various nutritional benefits of pumpkin. It contains all necessary macro- and micro-nutrients, amino acids, vitamins, antioxidants and bioactive compounds with a relatively low amount of antinutrients. The recent upsurge in consumer interest for health-promoting products has opened up new vistas for plant products containing bioactive compounds in different food formulations.

This paper contains information regarding the chemical composition, nutritive value, phytochemical studies, pharmacological properties, bio-accessibility, food and industrial applications of pumpkin. Worldwide, pumpkin is used as food additive in various food products such as candy, weaning mix, corn grits, kheer, jam, crackers, bread, etc. Effect of different processing methods such as high temperature, pH, blanching, oven drying, freeze-drying to retain or minimize its losses in case of color, texture, flavor, and the carotenoids are of concern. The review paper highlights the nutritional, therapeutic, potential and processing attributes.

It is very pertinent to determine the nutritional value of indigenous leafy-vegetables to establish their potentials in ensuring adequate nutrition and food security. One of the ways to promote fresh produce is through nutritional information. The paper aims to discuss these issues.

Simultaneous multi-element analysis of eight indigenous (with underutilized) vegetables commonly found in the Southwest Nigeria was done by inductively coupled plasma-atomic emission spectroscopy. Wild-grown vegetables were harvested from the National Horticultural Research Institute orchard, in Southwest Nigeria. The contents of investigated quantity minerals as well as trace and heavy metals were determined.

In all the vegetables, potassium was discovered as the most abundant quantity mineral present with range of 4.364 mg/g in Vernonia amygdalina to 78.218 mg/g in Senecio biafrae (an underutilized vegetable). This was followed by calcium ranging from 3.351 mg/g (Vernonia amygdalina) to 9.914 mg/g (Solanum macrocarpon). Lead had the least content among the heavy metals with range of value from below the detection limit of the method used to 0.05 μg/g.

The results obtained for the mineral profile provide useful information that could sensitize the people on the need for their consumption. This can be a good opportunity to enhance micronutrient supply of the diet of low-income earners which form majority of the society.

Findings from this study indicate that the indigenous vegetables that are not formally cultivated could be important in improving micronutrient deficiency of low-income earners.

Almond oil is a gourmet product with functional food characteristics owing to its high almond oil content and high nutritional quality. One of the primary constraints on its production is the lack of information regarding oil extraction from an industrial perspective, including by-products generation.

The performance, quality and composition characteristics were analyzed, both from the physical-chemical and organoleptic point of view, of the almond oils obtained through two pressure systems: screw press (SP) and hydraulic press (HP). To ensure the success of almond oil production at a commercial scale, in this work, an economic study of the costs of the process was carried out as a complementary part of optimizing the production of virgin almond oil.

Physicochemical analysis showed little difference, just in total sterols (HP 2069, SP 2153) and some quality indexes (K232: HP 1.63, SP 2.13; peroxide index: HP 1.74, SP 0.95), in contrast to sensory analysis. Consumer judges valued roasted almond oil extracted using a HP the best. The production cost of the oil extracted with the SP was €23.05/l. With the HP it was €25.13/l, owing to the lower oil yield in the extraction. The most expensive treatment was for the HP with toasted almonds (€27.76/l), owing to the greater need for processing.

Production costs derived from the method used have received little attention. This paper presents data that allow for the transference between academic and industrial ambit and their economic viability.

Pumpkins are a rich source of essential nutrients, namely, β-carotene, minerals and vitamins, and they are therefore suitable for making functional juice. This study aims to develop pumpkin-based functional juice and assess the acceptability of the product by various consumers. In total, 55 per cent of the panelists disliked the pumpkin juice because of its strong off-flavor. Consequently, different blends of pumpkin juice with mango, orange, strawberry and green apple juices were prepared and evaluated for global appreciation and descriptive sensory analysis.

Pumpkins, green apples, mangos, oranges and strawberries were obtained from the local market. Four mixtures of juices were prepared by mixing pumpkin and mango juice (750/250, v/v), pumpkin and green apple juice (750/250, v/v), pumpkin and orange juice (750/250, v/v) and pumpkin with strawberry and orange juice (750/125/125, v/v/v). The contents of moisture ash, fiber, carbohydrate, crude protein and lipids were estimated according to AOAC methods. β-Carotene, vitamin C and minerals were determined. A semi-trained panel consisting of 100 members assessed sensory characteristics of pumpkin juice and mixtures using a quantitative descriptive analysis method (QDA) for different attributes.

The findings show that the moisture, crude protein, fiber, ash and carbohydrate contents indicate that the developed pumpkin juice was rich in these essential nutrients. The fiber value in our study was lower than the value previously reported for pumpkin. The content of β-carotene and vitamin C in the developed pumpkin juice was considerably higher than that reported previously for fruits. The values of calcium and iron of the current study were much higher than those previously reported in vegetable juices and mixtures. The sensory results revealed that the developed pumpkin-based juice blends are acceptable by the consumers.

This study was carried out to develop a suitable formula for preparing functional juices from pumpkin, which is not consumed willingly by children and the elderly; the authors aimed to improve its taste and flavor by mixing it with different fruit juices. The results demonstrated that pumpkin juice is rich in essential nutrients such as vitamins, minerals and antioxidants, suggesting its health-promoting potential. Mixing pumpkin juice with mango juice or orange and strawberry juices significantly improved the sensory quality of the products. Strikingly, the formulated pumpkin juice mixtures received good acceptance and appreciation by children and the elderly, which could promote its use as a functional juice. Generally, pumpkin-based juice blends are rich in vitamins, minerals and antioxidants and can therefore be consumed as a functional beverage with potentially increased health-promoting characteristics. Using pumpkin for developing functional juices could add commercial value to pumpkins. Future studies should specifically focus on large-scale production and commercialization of these juice mixtures.

Production of oil from Camelina sativa seed (CS) by pressing yields a by‐product in the form of press cakes (PC). The PC were traditionally used as ingredient in fodder for animals. This paper aims to estimate the nutritional value of CS and PC with regard to exploitation in human nutrition.

Seed samples for analyses were collected from remote locations in Europe and in Scandinavia. The analyses of CS for the content of carbohydrates, vitamins and minerals were carried out using advanced analytical technology. With few exceptions, standard analytical methods were used.

The analyses quantified the content of carbohydrates, vitamins and minerals of CS. The mean content of glucose was 0.42 per cent, fructose 0.04 per cent, sucrose 5.5 per cent, raffinose 0.64 per cent, stachyose 0.36 per cent, starch 1.21 per cent, pectin 0.96 per cent, mucilage 6.7 per cent, crude fibre 12.8 per cent and lignin was 7.4 per cent. The analyses for vitamins were restricted to water soluble vitamins of B series. The content of thiamin (B1) was 18.8  μg/g, riboflavin (B2) 4.4  μg/g, niacin (B3) 194  μg/g, pantothenic acid (B5) 11.3  μg/g, pyridoxine (B6) 1.9  μg/g, biotin (B7) 1.0  μg/g and folate (B9) 3.2  μg/g. Analyses for selected minerals disclosed the content of calcium (Ca) 1.0 per cent, magnesium (Mg) 0.51 per cent, sodium (Na) 0.06 per cent, potassium (K) 1.6 per cent, chlorine (Cl) 0.04 per cent, phosphorus (P) 1.4 per cent, sulphur (S) 0.24 per cent, iron (Fe) 329  μg/g, copper (Cu) 9.9  μg/g, manganese (Mn) 40  μg/g, nickel (Ni) 1.9  μg/g and zinc (Zn) 69  μg/g.

The available scientific documentation does not provide information concerning analyses of CS for the content of carbohydrates, vitamins and minerals. The present investigation reveals the quantitative contribution of these substances to the total nutritional value of CS. Chemical characteristics and the role of the respective substances in metabolism are briefly reviewed.

The purpose of this paper is to investigate the mechanical behavior and propagation of cracks of numerical granite samples through the Brazilian split test and to provide a reference for predicting the behavior of real granite samples.

The numerical models of granite containing two fissures are established using the parallel bond model (PBM) and the smooth joint model (SJM) in PFC2D. The peak stresses, number of cracks and anisotropic ratios are obtained to study the influence of the mineral composition and the angle of inclination of rock bridge on the strength, failure mode and deformation characteristics.

The numerical results obtained show that the mineral composition has a marginal influence on the peak stress. When the angle of inclination of rock bridge β increases, the peak stress drops to its minimum value at β = 90° and then gradually increases to a relatively low level. The behavior of cracks falls into three categories based on the distribution of cracks. By analyzing the stress–strain curve and the process of crack propagation for sample No. 4 with β = 60°, it is found that the process of failure can be divided into four stages and tensile cracks dominate. The anisotropic ratios of peak stress and a number of cracks obtained show that the peak stress is low anisotropic and the number of cracks is medium anisotropic.

This paper presents a numerical simulation method to analyze mechanical behavior and propagation of cracks under different conditions. The proposed method and the results obtained are useful for predicting the behavior of real granite samples in laboratory and engineering projects.