Search results

The purpose of current study deals with the development and wear testing of jute and cotton fiber reinforced with nano fly ash-based epoxy composites. Performance of waste cotton fabric nano hybrid composites are compared with waste jute fabric nano hybrid composites.

Basic hand layup technique was used to develop composites. To optimize the parameters and design of experiments, Taguchi design was implemented to test wear rate and co-efficient of friction as per ASTM standards. Performance of waste cotton fabric nano hybrid composites is compared with waste jute fabric nano hybrid composites.

Result shows that nano fly ash lowers the wear rate and co-efficient of friction in developed composites. Findings reveals that hybrid composites of waste jute Fabric with 3 Wt.% of nano fly ash performed best amongst all composites developed. Morphology of nano composites worn out surfaces are also analyzed through SEM.

Practically, textile waste, i.e. jute, cotton and nano fly ash (thermal power plant) all wastes, is used to develop composites for multi-function application.

Wastes are reused and recycled to develop epoxy-based composites for sustainable structures in aviation.

To the best of the authors’ knowledge, nano fly ash and jute, cotton combination is used for the first time to develop and test for wear application.

The objective of this work was to use the spinning waste in form of short fibres for the preparation of nano size fillers in nanocomposite applications. The present paper concerns with the jute fibres as the source to produce nanocellulose by high energy planetary ball milling process and its potential applications as fillers in biodegradable nanocomposite plastics used in automotives, packaging and agriculture applications. Influence of various milling conditions like nature of milling (i.e. dry or wet), milling time and ball size are studied on the particle size distribution and morphology of jute nanoparticles obtained. Wet milling in the deionised water resulted into particle size refinement below 500 nm with narrow size distribution after 3 hours of milling at the cost of small amount of contaminations introduced from milling media.

Here, attempts have been made to explore the possible use of Marine waste as filler materials into the bio-fibre composites. Clam shell is a type of marine waste which belongs to the class of Bivalvia. It is mainly made of aragonite crystalline polymorphs. This paper aims to develop a new class of natural fibre composite in which jute fibre as reinforcement, epoxy as matrix and clam shell, as particulate microsphere filler. The study investigates the effects of different amounts of clam shell powder on the kinetics of water absorption of jute fibre-reinforced epoxy composite. Two different environmental conditions at room temperature, i.e. distilled water and seawater, are collected for this purpose. Moisture absorption reduces when clam shell is added to the jute-epoxy composite. The curve of water absorption of jute-epoxy composites with filler loading at both environmental conditions follows as Fickian behaviour.

Hand lay-up technique to fabricate the composite – Experimental observation

The incorporation of Clam shell filler in jute epoxy composite modified the water absorption property of the composite. Hence the present marine waste is an potential filler in jute fibre reinforced polymer composite.

The paper demonstrates a new class hybrid composite material which uses a marine waste as important phase in the bio-fibre-reinforced composite. It is a new work submitted for original research paper.

A study is performed on the properties of jute-pineapple leaf fiber (PALF) blended yarn and 100% jute yarn. The jute-PALF blend ratios of two counts of yarn (5 and 7 lbs/spy) are 70:30 and 80:20 respectively. The physical properties of the blended yarns such as load at break, strain at break, tenacity at break, tensile modulus and quality ratio are tested and measured. It is observed from the test results that the physical properties of the blended yarns are better than those of the 100% jute yarn. The experimental results also show that the physical and structural properties of the blended yarn changes with the increase of PALF in the blend ratio. So the blending of PALF has a positive impact on yarn properties. Another study is done, in which it is found that surface appearance properties like color strength (K/S value) and whiteness, yellowness and brightness indices of the blended yarns are almost the same as those of the jute yarn due to the blending of jute-PALF. Therefore, the blending ratio does not cause any notable changes in the natural color of the jute yarn.

The purpose of this paper is to synthesize chitosan, N-octyl chitosan (NOCh) and carboxymethyl chitosan (CMCh) derivative from prawn shell wastes and identify their applications as modifiers on cellulosic fibres, jute and cotton, to develop quality textile fibres.

Chitosan was obtained by deacetylation of chitin. NOCh was obtained by reductive amination of chitosan. Water-soluble CMCh was prepared by reacting chitosan with monochloroacetic acid in aqueous alkaline media at ambient conditions. Chitosan, NOCh and CMCh were applied on cellulosic fibres, and structure and physico-chemical characteristics of chitosan derivatives and modified fibres were investigated and analysed.

The molecular weight, degree of deacetylation and ash content of prepared chitosan were 1,39,958 Da, 85 and 2.33 per cent, respectively. The moisture content, water holding capacity and total nitrogen content were above 10, 450 and 6.5 per cent, respectively. Average degree of substitution of CMCh was 0.82 as determined by titrimetric analysis. Fourier transform infrared spectroscopy (FTIR) spectra showed characteristic peaks of carbonyl group at 1,659 cm⁻¹, –NH2 at 1,600 cm⁻¹, symmetric stretching of C-H in the methyl group at 1,520 cm⁻¹ and carboxylic group at 1,737 cm⁻¹. Thermograms showed moderate thermal stability in treated fibres compared to untreated fibres. Surface morphology of the modified fibres exhibited smoother surface due to the absorption of chitosan, NOCh and CMCh.

Modification of jute and cotton by sorption of NOCh and CMCh introduced new functional groups on the fibre surface with chemical bonding, which was confirmed by FTIR. Surface morphology of the fibres was carried out by scanning electron microscopy. As the modified fibres also showed good dyeability and colour fastness as well as other properties, the chitosan derivatives as a textile modifier would be helpful to avoid synthetic petroleum-based chemical modifiers as well as to manage the environmental pollution from prawn shell waste and other toxic chemicals.

This paper aims to prepare BisGMA (bisphenol-A glycidyldimethacrylate)/jute fibre/fly ash hybrid composites with improved mechanical and corrosive properties.

BisGMA prepolymer was first synthesised using diglycidyl ether of bisphenol-A and methacrylic acid. Then 2-hydroxy ethylacrylate-treated jute fibre and sodium hydroxide-treated fly ash were incorporated in the fabrication of composites using dicumyl peroxide, cobalt naphthenate and N,N-dimethyl aniline as catalyst, accelerator and promoter, respectively. The composition of BisGMA, jute fibre and fly ash was kept constant, whereas treated and untreated jute fibre and fly ash were used alternatively.

Treatment of both jute and fly ash leads to improved mechanical properties of composites. However, treated fabric plays a dominant role compared to treated fly ash as filler. Among all the composites, the one having both treated jute fibre and treated fly ash is the most suitable composite for structural applications.

The present investigation has come up with a hybrid composite that can be used for a wide range of applications like low-cost housing and structural projects, structural laminates, etc., as it is both corrosion- and moisture-resistant. It is also the most durable from the mechanical point of view. There is also a scope of using other fillers instead of fly ash to study the changes brought about in the mechanical properties.

The above composites have never been fabricated before.

The purpose of this study was to characterize the fiber from Curcuma longa (turmeric) stems. The fiber’s properties were used to assess its potential for textile yarn production.

The natural fiber used in this investigation was extracted from agricultural waste through a cold water-retting process.

The Curcuma longa fiber had a crystallinity of 50%. Cellulose, hemicellulose and lignin were detected in the fibers’ Fourier transform infrared spectra. A Curcuma longa fiber bundle contains several constituent fibers. The fibers exhibited an irregular cross-section, with a variable oval shape for the lumen. The fibers of Curcuma longa averaged 30.22 cm in length. The fineness of the fibers was 6.58 Tex. In this study, Curcuma longa fibers had an 11.30% moisture regain. The tensile strength of the fibers was 19.18 g/Tex. Curcuma longa fibers showed a break elongation of 9.79%. The fiber coefficient of friction was 0.3.

Curcuma longa has characteristics that make it appropriate for industrial uses like spinning. Thus, it is possible to use Curcuma longa fiber as a raw material for textiles.

The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric produced using these fibres.

The fibres were extracted via a decortication method. The acquired intrinsic qualities of the fibres were used to assess the feasibility of using them in textile applications. The thermal bonding approach was used for the development of the non-woven fabric, using a hot press machine with low-melt polyester fibre as a binder.

The mean length of Curcuma longa fibres was determined to be 52.73 cm, with a fineness value of 4.00 tex. The fibres exhibited an uneven cross-sectional morphology, characterized by a diverse range of oval-shaped lumens. The fibre exhibited a tenacity of 1.45 g/denier and an elongation value of 4.30%. The fibres possessed a moisture regain value of 11.30%. The experimental non-woven fabrics had consistent weight and thickness, while exhibiting different properties in terms of tensile strength and air permeability, with Fabric C having the highest tensile strength and the lowest air permeability value.

The features of Curcuma longa fibre, obtained with the decortication process, exhibited suitability for textile applications. Three experimental non-woven fabrics comprising different compositions of Curcuma longa fibre and low-melt polyester fibre were produced. The tensile strength and air permeability properties of these fabrics were influenced by the composition of the fibres.

The aim of the present study is to find the tribological properties of newly developed polyester-based hybrid glass-jute fibre reinforced plastic composites loaded with different weight per cent of hybrid filler particles were investigated under a dry sliding medium from room temperature to 75°C.

The study was carried out using a pin-on-disc wear test set-up. The design of experiments was carried out in a controlled way using a central composite design based on response surface methodology to observe the effect of various parameters i.e. sliding velocity, sliding distance, the temperature of counterface and different applied load conditions during dry-sliding.

The maximum wear resistance was found at 9 Wt% loading of filler, 4 ms^-1 sliding velocity, 30 N applied load, 54°C temperature of the counterface and 1,100 m sliding distance condition. Optimum values of hybrid filler loading, sliding velocity, applied load, the temperature of the counterface and sliding distance for the minimum coefficient of friction value and minimum friction force are 9 Wt%, 4 ms⁻¹, 30 N, 54° C, 1,100 m and 12 Wt%, 3 ms⁻¹, 20 N, 59°C and 1,100 m, respectively. The worn surface morphology was studied using scanning electron microscope, for wear dominant mechanisms.

The tribological properties of newly developed polyester-based hybrid glass-jute fibre reinforced plastic composites loaded with different weight % of hybrid filler particles, were investigated under dry sliding medium from room temperature to 75°C has not been attempted yet.

This paper aims to evaluate the effects of banana (Musa) peel and guava (Psidium guajava) leaves extract as mordants on jute–cotton union fabrics dyed with onion skin extract as a natural dye.

The dye was extracted from the outer skin of onions by boiling in water and later concentrated. The bio-mordants were prepared by maceration using methanol and ethanol. The fabrics were pre-mordanted, simultaneously mordanted and post-mordanted with various concentrations according to the weight of the fabric. The dyed and mordanted fabrics were later subjected to measurement of color coordinates, color strength and colorfastness to the washing test. Furthermore, the dyed samples were characterized by Fourier transform infrared, and different chemical bonds were analyzed by X-ray photoelectron spectroscopy analysis.

Significant improvement was obtained in colorfastness and color strength values in various instances using banana peel and guava leaves as bio mordants. Post-mordanted with banana peel provided the best results for wash fastness. Better color strength was achieved by fabric post-mordanted with guava leave extracts.

Sustainable dyeing methods of natural dyes using banana peel and guava leaves as bio mordants were explored on jute–cotton union fabrics. Improvement in colorfastness and color strength for various instances was observed. Thus, this paper provides a promising alternative to metallic salt mordants.