Search results

This paper aim to comparatively study of mechanical properties of gamma radiation treated raw and polyethylene glycol modified bleached jute reinforced polyester composite. The natural fiber-reinforced composite has been a wide area of research, and it is the preferred choice due to its superior physical and mechanical properties like low density, stiffness and light weight. Among several natural fibers, jute is one that has good potential as reinforcement in polymer composite. Jute fibers biodegradability, low cost and moderate mechanical properties make it as a preferable reinforcement material in the development of polymer matrix composites.

In the present work, raw jute fabrics-reinforced polyester composite (as RJPC) and polyethylene glycol (PEG)-modified bleached jute fabrics-reinforced polyester composite (as MBJPC) were fabricated by the heat-press molding technique at 120°C for 5 min at a pressure of 5 tons. Prior to the composite formulation, low lignin content bleached jute fabrics were chemically modified with PEG for the better compatibility of the fabrics with the polyester matrix and enhancing elongation properties. All the composites irradiated with different gamma radiation dose in the range of 2 to 14 kGy.

The irradiated composites showed highest improved of mechanical properties at the 10 kGy γ-radiation dose. However, the hard and sunlight-sensitive high lignin content γ-RJPC showed higher mechanical properties except elongation properties compared to that of low lignin content γ-MBJPC.

After the γ-ray irradiation, both the γ-RJPC and γ-MBJPC developed high degree of cross-linking among the polyester molecules and thereto fabrics with the consequence of significant changed of surface morphology as observed by atomic force microscopy.

A study is performed on the properties of jute-pineapple leaf fiber (PALF) blended yarn and 100% jute yarn. The jute-PALF blend ratios of two counts of yarn (5 and 7 lbs/spy) are 70:30 and 80:20 respectively. The physical properties of the blended yarns such as load at break, strain at break, tenacity at break, tensile modulus and quality ratio are tested and measured. It is observed from the test results that the physical properties of the blended yarns are better than those of the 100% jute yarn. The experimental results also show that the physical and structural properties of the blended yarn changes with the increase of PALF in the blend ratio. So the blending of PALF has a positive impact on yarn properties. Another study is done, in which it is found that surface appearance properties like color strength (K/S value) and whiteness, yellowness and brightness indices of the blended yarns are almost the same as those of the jute yarn due to the blending of jute-PALF. Therefore, the blending ratio does not cause any notable changes in the natural color of the jute yarn.

The present study aims to demonstrate the application of newly developed combinative distance-based assessment (CODAS) approach for grading and selection of Tossa jute fibres, which possesses some unique features uncommon to other variants of multi-criteria decision-making (MCDM) method.

The CODAS method was used in this study to rank/grade ten candidate lots of Tossa fibres on the basis of six apposite jute fibre properties, namely, fibre defect, root content, fineness, strength, colour and density. These six fibre properties were considered as the six decision criteria, here, and they were assigned weights as determined previously by an earlier researcher using analytic hierarchy process. The grading of jute fibres was done based on a comprehensive single index known as the assessment scores (Hi), in descending order of magnitude.

Among the 10 Tossa jute lots, T2 was ranked 1 (top grade) because of the highest assessment score of 6.887, followed by T1 with Rank 2 (assessment score 1.830). Because of the least assessment score of −2.795, the candidate lot T4 was considered as the worst, and hence ranked 10. The overall ranking pattern given by the CODAS method was similar to the TOPSIS approach done by Ghosh and Das (2013). This study was supported by various sensitivity analyses to judge the efficacy of the present approach. No occurrence of rank reversal during the sensitivity analyses obviously corroborates the robustness and stability of the CODAS method.

Jute pricing is fixed solely by the quality for which grading of fibre is prerequisite. The traditional “Hand and Eye” method or Bureau of Indian Standards (BIS) system for jute grading is basically subjective assessment and need domain expertise. MCDM is reported as the most viable solution which gives due importance to the fibre parameters while grading the fibres based on a single index. The present study demonstrates the maiden application of CODAS to address the fibre grading problems for jute industries. This approach can also be extended to solve other decision problems of textile industry, in general.

CODAS is a recently developed exponent of MCDM. Uniqueness of the present study lies in the fact that this is the first ever application of CODAS in the domain of textile industry, in general, and jute industry, in particular. CODAS approach is very simple involving a few simple mathematical equations yet a potent tool of decision-making. This method possesses some features uncommon in other variants of MCDM. Moreover, the efficacy of CODAS method is investigated through various sensitivity analyses, which has been ignored in the earlier approaches.

This paper aims to examine the loss of tenacity and colorfastness properties of bleached and modified (acrylonitrile, AN and methacrylonitrile, MAN) jute fibres dyed with Reactive Orange 14 and Basic Violet 14.

Jute fibres dyed with Reactive Orange 14 and Basic Violet 14 were studied as a function of exposure to sunlight in air, washing with soap solution and spotting with acids and alkalis.

Dye absorption of Basic Violet 14 was higher compared to Reactive Orange 14 at optimum dyeing conditions. Optimum dye uptake of Reactive Orange 14 required relatively severe conditions compared to that of Basic Violet 14. Whereas, Reactive Orange 14 showed overall good colorfastness to sunlight and moderate in washing compared to Basic Violet 14. All the bleached and modified fibres showed good colorfastness to weak acids and alkalis regardless of Reactive Orange 14 and Basic Violet 14 dyes. The loss in tenacity was higher in the case of non-modified fibres, and among the modified fibres, Basic Violet 14 showed the lowest loss in tenacity in the exposure to sunlight.

Many studies have been devoted to improve the substantivity of cellulosic fibre for reactive dyes. A few efforts were made to improve the light fastness. In this work, investigation will be made on a comparative study of loss of tenacity and colorfastness properties of bleached and modified (AN and MAN) jute fibres dyed with both Reactive Orange 14 and Basic Violet 14 on exposure to sunlight, washing and acid and alkali spotting. Optimum dyeing conditions will also be investigated for economic dyeing.

The study aims to investigate the influence of fabric hybridization, stacking sequences and matrix materials on the tensile strength and damping behavior of jute/carbon reinforced hybrid composites.

The hybrid composites were fabricated with different sequences of fabric plies in epoxy and polyester matrix using a hand layup technique. The tensile and vibration characteristics were evaluated on the hybrid laminated composite models using finite element analysis (FEA), and the results were validated experimentally according to ASTM standards. The surface morphology of the fractured specimens was studied using the scanning electron microscope.

The experimental results revealed that the position of jute layers in the hybrid composites has a significant influence on the tensile strength and damping behavior. The hybrid composite with jute fiber at the surface sides and carbon fibers at the middle exhibited higher tensile strength with superior damping properties. Further, it is found that the experimental results are in good coherence with the FEA results.

The less weight and low-cost hybrid composites were fabricated by incorporating the jute and carbon fabrics in interply configurations. The influences of fabric hybridization, stacking arrangements and matrix materials on the tensile and vibration behavior of jute/carbon hybrid composites have been numerically evaluated and the results were experimentally validated.

After reading this case, the students will be able to comprehend the conceptual framework of entrepreneurial learning to tap business opportunities; identify the challenges of small businesses; understand the structure of the franchise business model; and recognise the need for succession planning for business sustainability and evaluate various options for succession.

“Jute Cottage”, the two-decade-old brand, was operating through its own stores and franchise outlets. The brain behind the brand was Nasreen and her husband Bilal. Dire times led the duo, venture into this business. It was in 1992, the family had relocated from Kolkata and was trying to make a living in Bangalore. Nasreen joined as a teacher and her husband focused on his existing trading business in jute packaging material. This was when Nasreen tried selling jute bags from home that were bought from Kolkata. After a few years, when Bilal’s business had a setback, Nasreen thought of giving a push to her home business. This was how a business that was started at a small level grew slowly and steadily under Nasreen’s leadership to become a brand and reach the current level of owning four stores and 10 franchise outlets across South India. As Nasreen and Bilal were growing old and wanted to retire, they expected their only son, Ataullah, to take over the reins of their business. But to their dismay, he was not interested, as his focus was on movie-making and designing.

The case can be taught to MBA/PGDM students to give them experiential learning in the courses on Entrepreneurship and Strategy. It gives insight on how to tap the business opportunities, grow and sustain. The case also highlights the need for succession planning for business continuity.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

Due to several unique characteristics, such as high tensile strength, low extensibility, high frictional resistance, biodegradability, eco-friendliness and cheapness, Jute ranks second just after cotton with respect to its worldwide consumption and production. To overcome the difficulties of the existing Jute grading procedure, this paper aims to focus on the application of decision-making trial and evaluation laboratory (DEMATEL) and multi-attributive border approximation area comparison (MABAC) methods for evaluation of 10 Tossa Jute fiber lots based on strength, defects, root content, color, fineness and bulk density properties.

The DEMATEL method divides all the six physical properties of Jute fiber into cause and effect groups. The most influencing property is also identified. On the other hand, the considered Jute fiber lots are ranked using MABAC method along with the identification of the strengths and weaknesses of each of them.

This combined approach would provide a more scientific and realistic way of Jute grading and evaluation based on various properties of the considered Jute fiber lots. The positions of the superior and the inferior Jute lots perfectly match with those as identified by the earlier researchers.

It is concluded that the adopted combined decision-making tool can be effectively applied for grading and evaluation of other natural fibers with diverse heterogeneous physical properties.

This paper aims to prepare BisGMA (bisphenol-A glycidyldimethacrylate)/jute fibre/fly ash hybrid composites with improved mechanical and corrosive properties.

BisGMA prepolymer was first synthesised using diglycidyl ether of bisphenol-A and methacrylic acid. Then 2-hydroxy ethylacrylate-treated jute fibre and sodium hydroxide-treated fly ash were incorporated in the fabrication of composites using dicumyl peroxide, cobalt naphthenate and N,N-dimethyl aniline as catalyst, accelerator and promoter, respectively. The composition of BisGMA, jute fibre and fly ash was kept constant, whereas treated and untreated jute fibre and fly ash were used alternatively.

Treatment of both jute and fly ash leads to improved mechanical properties of composites. However, treated fabric plays a dominant role compared to treated fly ash as filler. Among all the composites, the one having both treated jute fibre and treated fly ash is the most suitable composite for structural applications.

The present investigation has come up with a hybrid composite that can be used for a wide range of applications like low-cost housing and structural projects, structural laminates, etc., as it is both corrosion- and moisture-resistant. It is also the most durable from the mechanical point of view. There is also a scope of using other fillers instead of fly ash to study the changes brought about in the mechanical properties.

The above composites have never been fabricated before.

This paper aims to discuss the discourse of globalisation and its implications in the case of state-owned jute mills (SOJMs) in the post-colonial state of Bangladesh.

The authors draw upon a critical debate on the concept of globalisation and critical political economy to revisit the country’s historical, political, social and cultural construction to discuss conditions of its conformity within the global order. Additionally, the perspective of subaltern studies underpins discussion of the context of the post-colonial state.

A schematic analysis of the context surfaces issues that underpin the process of “truth production” and that have contributed to global integration of the Bangladesh economy. We consider how this discourse benefits some people, while over time, the majority are dislocated, excluded and deprived. Hence, this discourse denotes a territorial power of globalism that leads us to conceptualise Bangladesh as a neo-colonial state.

Through a case study of SOJMs, this paper contributes to discussion on the essence and implications of the globalisation discourse and on how its methods and techniques reinforce hegemony in the name of development and sustainability in the forms of liberalisation, democratisation and good governance in a state like Bangladesh.

The case has practical value exhibiting forces creating sustainable livelihood at grassroots level and at the same time depicting how business and social goals can be reconciled through innovative mechanisms.

The case covers the journey of a social enterprise lead by a woman entrepreneur, run by women workers and providing livelihood to several rural women entrepreneurs through providing skill development training in making hand-made jute bags.

MBA and BBA

Teaching notes are available for educators only.

CSS 3: Entrepreneurship