Search results

A study is performed on the properties of jute-pineapple leaf fiber (PALF) blended yarn and 100% jute yarn. The jute-PALF blend ratios of two counts of yarn (5 and 7 lbs/spy) are 70:30 and 80:20 respectively. The physical properties of the blended yarns such as load at break, strain at break, tenacity at break, tensile modulus and quality ratio are tested and measured. It is observed from the test results that the physical properties of the blended yarns are better than those of the 100% jute yarn. The experimental results also show that the physical and structural properties of the blended yarn changes with the increase of PALF in the blend ratio. So the blending of PALF has a positive impact on yarn properties. Another study is done, in which it is found that surface appearance properties like color strength (K/S value) and whiteness, yellowness and brightness indices of the blended yarns are almost the same as those of the jute yarn due to the blending of jute-PALF. Therefore, the blending ratio does not cause any notable changes in the natural color of the jute yarn.

The purpose of this paper is to substitute wheat flour by passion fruit peel flour in Brazilian honey bread (pão de mel), with evaluation of the breads’ sensory features, chemical composition and physical properties.

Honey breads with wheat flour (standard) and with replacement of this ingredient by 10 to 50 per cent passion fruit peel flour were produced. Two sensory tests were applied, to identify how different formulations with passion fruit peel flour were when compared to the standard formulation, and also the acceptability of the products. The selected honey breads, through sensory results, were evaluated regarding to chemical composition and physical properties.

Formulations with 10 and 20 per cent substitution were the least different to formulations with only wheat flour, and were as acceptable as the wheat flour sample. Physical and chemical characteristics of breads with 10 and 20 per cent passion fruit peel flour were similar; however, honey bread with 20 per cent passion fruit peel flour had higher fibre content, ash quantity and hardness value; a lower specific volume; and a different colour from the wheat flour sample.

This study offers an opportunity to food industries through utilization of an agro-industrial by-product on the formulation of a Brazilian traditional product.

This study presents the feasibility of using an agro-industrial by-product to Brazilian honey bread, enhancing the nutritive value of this product and reducing the impact of passion fruit peel flour on the environment.

Regarding the contribution of Australian small-size housing in the enhancement of total energy consumption of the country and the roles of the occupants’ preferences in successful implementation of action plans, the purpose of this study is to identify the Australian occupants’ collaborative image of housing energy efficiency. The two main objectives are, therefore, to address the main energy-related housing physical factors that have the potential in representing the housing image of Australian occupants and to explain the causal factors that make the physical factors critical to their energy efficiency perception.

This study has been developed through a qualitative approach. Given that the images encompass a wide range of information expressing human perceptions, an online photo-based qualitative survey was developed based on previous research works. The survey includes respondents’ demographic profiles and the evaluation of images, asking for their perception of overall housing energy efficiency, the impacts of building envelope physical attributes on the energy efficiency of the houses and the reasons behind the selection of different attributes.

This study has developed a set of attribute-based factors, explaining occupants’ collective perception of energy efficient small-size housing of Brisbane in the area of exterior aspects of the buildings. Specifically, the collaborative image of small-size housing of Brisbane is about the thermal performance of the buildings provided through passive climatic principles by using more efficient envelope features, e.g. material, colour, transparency, texture, openings, balconies and shadowing devices, while ignoring the impacts of architectural composition principles along neighbourhood quality. The key attributes in assessing the small-housing energy efficiency are ventilation, thermal performance and shadowing. The housing images in old traditional architectural style with rural face, built by stone, brick and concrete in high dense vegetation were evaluated to be more energy efficient than those with modern architecture, built by large glass panel and metal cladding with light or no vegetation.

The main limitation of the paper is related to the nature of an image-based survey, which leads to ignoring some aspects of real spaces such as odour, temperature and noise.

This research has the potential for developing a practical methodology for assessing housing-resident fit using computer-based methodology and neural networks.

This research has the potential for developing a methodology, assisting the end users in meeting their desires and motivations by helping them in assessing how a housing unit fits with their expectations and preferences.

This research provides a reliable conceptual platform for dealing with the complexity of occupants’ housing perceptions. This is achieved by establishing a collective conceptual picture of these environmental perceptions, namely, housing image, which is a platform for transferring abstract data related to human perception into measurable and quantitative scales.

This study aims to develop a photo-based methodology to identify occupants' collaborative image of the energy-efficient small-size housing.

Employing qualitative and quantitative approaches, 24 photos were randomly selected from different urban areas of Brisbane (Australia) city for an online survey. A total of 36 participants evaluated the photos 159 times.

Conducted content analysis resulted in the identification of 5 attribute-based factors, generated from 16 semantic categories and 74 attributes. Using a non-parametric Chi-square test, the factors were categorised in two levels, i.e. (1) envelope elements (primary and secondary) and passive climatic principles; and (2) architectural composition principles and neighbourhood quality.

The discussion on the results via the theory of planned behaviour (TPB) suggests that regarding the external aspects, the people's image of energy-efficient housing could be influenced by their perceived control over changeable and adjustable attributes.

The photo-based methodology developed by this paper has the potential to quantify occupants' collaborative image of small-size housing energy efficiency, which would be essential in assisting them to adjust their dwelling units regarding the congruity of the energy efficiency attributes with their preferences.

Examines the tenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

In recent times, stretch denim garments have become very popular amongst consumers as the garment is able to provide body fit and body comfort at the same time. The purpose of this study is to investigate the effect of abrasion on the change in surface appearance, mass loss and ultimate tensile properties of the stretch denim fabric in different directions (warp, weft and biased).

After abrading the fabrics in three different directions (warp, weft and biased), the loss in ultimate tensile properties, mass loss and surface appearance has been investigated in the respective directions of abrasion (warp, weft and biased). The study also encompasses the effect of different types of stretch yarn with varying levels of elastane content on such unidirectional abrasive damage.

It is seen that with the same level of abrasion cycles, the fabric's response in terms of mass loss and loss in ultimate tensile properties are different in different directions. The mass loss due to abrasion in biased direction is found to be minimum. The loss in ultimate tensile properties due to abrasion was highest in the weft direction. It is also found that the higher mass loss due to abrasion does not always result in a greater loss in ultimate tensile properties. The composition and the structure of the weft yarn significantly affected the extent of the mass loss and the loss in ultimate tensile properties during abrasive damage.

The impact of abrasive damage in terms of mass loss and loss in tensile strength along the different directions of denim fabric has not been explored till date. Abrasion of fabric can be done both in multi-direction (Lissajous motion) as well as in uni-direction (linear motion). The multidirectional abrasion provides a holistic or comprehensive idea of the fabric's response to the abrasive damage but does not take into consideration the fabric's anisotropic response to the abrasive damage. Most of the earlier investigation related to abrasive damage of denim fabric has been done in instruments where the motion of the abrader is multidirectional (Lissajous) in nature. For greater depth of understanding about the fabric performance under abrasive damage along the various direction (warp, weft and biased), unidirectional abrasion is conducted in this study.

In recent times, the usage of elastane-containing denim garments has increased, as it provides fit and comfort both at the same time. The purpose of the study is to understand the effect of abrasion on the durability of comfort related to body movement and shape retention property of the stretch-denim fabric.

The paper investigates the effect of abrasion on the initial tensile properties, recovery and resilience properties of the stretch-denim fabric. Further, to analyse the effect of the composition of the elastane yarn, three different types of elastane yarns having different types of sheath (covering) fibre, structure and different levels of elastane content have been used in the weft.

The comfort related to body movement and the shape retention properties of the stretch-denim fabric got affected due to abrasive damage. The elastane yarn composition and structure played an important role in determining the extent of the change in such properties during abrasion. The fabric with a higher level of elastane content suffered a greater loss in shape-retention properties due to abrasion. The extent of mass loss in stretch-denim fabric does not always correlate to the extent of loss in the comfort and shape-retention properties.

Most of the earlier studies have investigated the effect of abrasion on the durability aspect of the stretch-denim fabric. In a practical scenario, the stretch-denim garments are rarely discarded due to tearing or change in appearance but mainly due to bagging, i.e. distortion in shape after usage. Thus, the study on the combined effect of the abrasion and cyclic loading on the comfort and shape-retention properties will help to predict the performance of the apparel during usage.