Search results

This paper aims to prove the expediency and effectiveness of magnetic textiles use obtained by adding nanopowder synthesized on the basis of oxides of divalent and trivalent iron oxides, taking into account bacteriostatic, magnetotherapeutic and compressive properties.

The research includes methods of synthesis of nanoelements of bivalent and trivalent iron, methods of the theory of elasticity for determining the pressure between compression clothing and a limb, methods of creating an annular magnetic field with determination of its voltage, methods of determining the growth dynamics of mold bacteria and methods of approximation of experimental data.

On the base of the determination of the forces arising from the interaction of magnetic nanotextiles with a magnetic field, the expediency of using these materials in the creation of compression clothing has been proven. An additional medical value of magnetic textiles is the bacteriostatic effect. The content of magnetic nanoelements in the textile composition of 0.2% almost completely suppresses mold infections

Cotton samples with the addition of nanocomponents based on ferric and ferric oxides were studied.

Magnetotextile materials can be used in magnetotherapy, compression clothing, in textile products that provide bacteriostatic properties.

The use of magnetic textile materials is a perspective direction for the creation of medical textile products with complex properties.

The aim of this study is to present an overview of sustainable practices in the development of waterproof breathable fabrics for garments. It aims to provide insights into the current state of academic research in this domain and identify and analyze major sustainable trends in the field.

This study conducts a thorough examination of research publications sourced from the Scopus database spanning the years 2013–2023 by employing a systematic approach. The research utilizes both descriptive analysis and content analysis to identify trends, notable journals and leading countries in sustainable waterproof breathable fabric development.

The study reveals a notable increase in studies focusing on sustainable approaches in the development of waterproof breathable fabrics for garments. Descriptive analysis highlights the most prominent journal and leading country in terms of research volume. Content analysis identifies four key trends: minimizing chemical usage, developing easily degradable materials, creating fabrics promoting health and well-being and initiatives to reduce energy consumption.

The main limitation of this research lies in its exclusive reliance on the Scopus database.

The insights derived from this study offer practical guidance for prospective researchers interested in investigating sustainable approaches to developing waterproof breathable fabric for garments. The identified trends provide a foundation for aligning research endeavors with contemporary global perspectives, facilitating the integration of sustainable methodologies into the garment industry.

This systematic literature review contributes original insights by synthesizing current research trends and outlining evolving sustainable practices in the development of waterproof breathable fabrics. The identification of key focus areas adds a novel perspective to existing knowledge.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

The purpose of this paper was to examine consumer perceptions of aesthetic attributes of textile-based assistive devices (ADs) and the language used by consumers to express those perceptions and concerns. Previous investigations of user feedback for ADs have largely focused on functional attributes rather than aesthetics.

An interpretivist research philosophy was selected to investigate the meaning behind consumer perceptions and to understand their viewpoints on the aesthetic dimensions of ADs. Using product reviews for two ADs sold on Amazon.com as data, the researchers conducted qualitative data analysis through coding and interpretation of meanings behind reviews to determine consumers’ perceptions related to their ADs.

The authors identified consumer concerns linking to aesthetics evidenced as a multisensory integration of visual, tactile and olfactory cues. Consumer-preferred language used to address aesthetic preferences was found to supplement the literature. Aesthetic considerations were found to be impactful on avoiding stigma and encouraging or discouraging continued use of the devices.

Findings may contribute to the development of textile-based ADs with improved aesthetics to enhance user experiences. New ways of using consumer language to interpret user needs may assist in future research and design practice for consumer products.

The use of consumer product reviews as a rich source of user data is discussed in this paper. As previous research on assistive technology has largely focused on functionality, results of this analysis offer insight into consumers’ aesthetic judgments related to ADs and bring a sensory perspective to the research area.

Synthetic materials have many drawbacks in high-performance garments because they absorb less moisture and cause allergies to sensitive individuals. Cotton materials cannot satisfy all the requirements and cannot provide the required high performance. This study aims to use eco-friendly materials with a common structure to analyse their suitability for high-performance garment application.

This study used two eco-friendly yarns (bamboo, modal and bamboo: modal 50:50) and yarns per needle (two- and four-ply yarns). with a single jersey knit construction and gauge of 7. The physical, mechanical, appearance, comfort, thermal and ultraviolet protection factor (UPF) protection characteristics were evaluated using 15 tests.

The produced knitted fabrics showed high performance for use as garments with physical, mechanical, appearance, comfort, thermal and UPF protection characteristics that were achieved, tested and analysed. The highest-achieved samples with a good UPF (<15) were made from bamboo material, which has other high-performance characteristics such as antibacterial characteristics, a soft surface, thermal insulation and others.

The single jersey structure was used for producing fabrics as it is the common structure in the garment. Also, only gauge 7 was used for its economics and ease of production.

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

This study aims to produce textile-like surfaces using fused deposition modelling (FDM) 3D printers and create a garment collection.

Experiments were conducted using different types of materials in FDM 3D printers until the sufficient flexibility was achieved to create textile-like structures. During the research, properties of polylactic acid (PLA), acrylonitrile butadiene styrene (ABS) and thermoplastic polyurethane (TPU) were observed. Geometrical patterns were printed and each of them gave a different result depending on the pattern. Based on the information obtained from the experiments, a garment collection with four total looks was designed inspired by Vivaldi’s “Four Seasons”.

Among the materials used, TPU, a flexible filament, yielded the best results. Because of the rigid properties of PLA and ABS, chain-like structures were printed to create relatively flexible surfaces, but the results were still not successful enough to create a clothing material. Therefore, TPU was preferred for the garment material selection.

In this study, combinations of 3D printed flexible structures and different types of fabrics were used to create a garment collection. It was concluded that, with the right material selection, 3D printing can be used as an alternative method to create a new aesthetic language in fashion design.

This study aims to conduct an exploratory research to find out the evolving constructs and variables of digital literacy, as seen by researchers since its inception. This research also includes an empirical study to identify and further analyze the digital literacy dimensions of university students studying fashion design program in Kolkata, India.

The exploratory study is based on a review of extant literature, whereas the empirical study is carried out through a self-assessment survey based on UNESCOs Digital Literacy Global Framework competences after validating their relevance with respect to the fashion and apparel industry. A total of 120 university students studying four years Bachelor of Design (Fashion Design) program were asked to rate their digital literacy competences on a five-point Likert scale, with a self-reported truth response against each statement. The results were analyzed using multivariate statistical tools.

Based on UNESCO competences, it came out that there are eight digital literacy dimensions. ANOVA further confirms that the dimensions requiring higher-order cognition, such as “software management competence” and “digital citizenship competence,” increase with progress in the graduate program. However, lower-order competence dimensions remained unchanged over time.

The research instrument used for this empirical study, its identified dimensions and the fact that higher-order competence dimensions are enhanced with progression in university education may be helpful for similar research in other fashion-related programs.

The COVID-19 pandemic has caused irrefutable devastation globally. Yet, academic and trade commentators have claimed that this disruption could have had a silver lining by presenting the fashion industry with the opportunity to reassess and rebuild in a slower, more considered way. Part of this reassessment, some have argued, may have been allowing the industry's pre-COVID sustainability buzz to come to fruition by nudging the fashion industry to go circular. This paper explores if, and how, the COVID-19 pandemic was (not) nudging the industry towards circularity using the case study of circular textiles.

Serial, semi-structured, qualitative interviews were conducted with three buyers and sourcers working for three UK-based fashion retailers. Each participant was involved in three interviews in June 2020 following the UK's first national lockdown.

The research findings suggest that, at the time this research was undertaken, these retailers were focussed on regaining profit, protecting their supply chains and producing “safe” designs whilst cutting back and becoming more risk averse. These actors suggested that, in contrast to the suppositions made by academic and media commentators, the COVID-19 pandemic was acting as a hindrance to circularity, not a helping hand, as retailers were less willing to invest in circular textiles at that time than they were pre-pandemic.

This paper offers valuable insight into the COVID-19 pandemic's impact on circular innovation within fashion retail whilst contributing to broader understandings of the principles of the circular economy within textiles and design.

Textile and contemporary apparel manufacturers are adopting and integrating cutting-edge technologies to reduce their impact on the environment and gain an advantage in the marketplace. Most previous studies have ignored business intelligence systems (BIS), notably in the textile and apparel industry (T&A), in favor of looking at the larger picture of how big data would affect retail and distribution in a company. This is especially true for the T&As.

The authors report that they conducted 14 semi-structured interviews with 12 international luxury tourism service providers. In this case, researchers use snowball features and systematic techniques to select participants. A qualitative content analysis strategy is used to capture the focus of the interviews.

Problems with T&A company sustainability, opportunities to increase value creation via use of industry-leading business intelligence (BI) solutions and perceived roadblocks to BIS adoption were all found by the poll. Garment retail and distribution sector has benefited greatly from the increased use of Industry 4.0 technologies, especially those that provide better BI solutions. Determine the extent to which industry participation slows down or speeds up the process. The Company Information System (BIS) will help convince non-tech-savvy business owners of the financial, economic and environmental benefits of adopting certain technologies developed as part of the industry 4.0 movement.

The authors of this research claim theirs is one of the first to investigate what variables affect the uptake of BIS, ultimately hoping to find out how BIS may be used by T&A businesses to tackle environmental issues through the use of Industry 4.0 technologies. The purpose of this study was to see whether BIS might aid T&A firms with their sustainability issues.

In the last several years, there has been a meteoric rise in interest in big data and business analytics among firms and educational institutions alike. This paper tries to introduce readers to the concept of business analytics in a way that is both academic and accessible, considering both the present and future of the field. This paper begins with a quick introduction, followed by a summary of the three distinct forms of predictive modeling discussed.

In an effort to help aspiring analytics professionals, they have identified, categorized and evaluated the nine distinct players that are now active in the analytics market. Following this, they will provide a high-level summary of the many different research projects currently being worked on by their group.