Search results

This paper reports an experimental investigation into the effect of laundering on seam tensile properties with the variation of stitch density, linear density of sewing threads and composition of base material. Tensile properties such as initial modulus, secant modulus, seam strength, strain at fracture and work up to fracture increase with stitch and linear density of sewing threads. The impact of coarser yarn is greater on seam properties of polyester‐cotton fabric than cotton fabric. The tensile properties except seam strain are reduced due to laundering. Reduction in initial modulus and secant modulus due to laundering is higher for polyester‐cotton fabric whereas decrease in seam strength, seam efficiency and strain at break is greater for coarser sewing thread.

The purpose of this paper is to investigate the factors effecting ultrasonic seam tensile properties.

In this study, 100 percent polypropylene and 100 percent polyester spunbond and meltblown nonwoven fabrics were sewn by using ultrasonic sewing machine with different rollers which have two, three and four rows. Seam tensile properties of the sewn nonwoven fabrics were investigated. Four-Level Nested Anova Design was applied to the data by using Minitab 15 software program.

Higher seam strength values were obtained by using four rows roller, PP fiber, spunbond fabric and 50 g/m2 fabric area density for all nonwoven fabrics. Statistical significance was found between fabric area density, roller rows and seam tensile strength properties and between fabric type, roller rows and seam elongation at break values.

When the authors look at the studies related to ultrasonic sewing, several researchers studied on welding parameters of ultrasonic sewing but very limited studies were performed on assembling of nonwoven fabrics with ultrasonic sewing. Therefore effect of production methods of nonwoven fabrics on the properties of ultrasonic sewing such as seam strength and elongation at break should be investigated.

The purpose of this review paper is to define the dominating factors (such as fiber, yarn, fabric structure, sewing thread, sewing needle and machine parameters) that affect the seam damages and causing defects. It also describes the various explanations of sewing defects in garment production and critically analyzes them for optimum selection of parameters and speeds for minimizing such faults. Hence, the knowledge of various factors which affect the sewing damages/defects will be helpful for garment manufacturers/researchers to know influence of the parameters and control the quality of producing seam.

This section is not applicable for a review paper.

Sewing damages such as needle cut and other sewing damages/defects are studied mostly in woven fabric. There are very few studies conducted on knitted fabric sewing damages/defects. The sewing damage problems do not have single solution that is capable of removing these damages in fabric. All the determined and affecting parameters related to fiber, yarn, fabric construction, sewing thread and sewing machine must be examined to design appropriate remedial measurement related to machine design, fabric parameters and sewing thread. This could help in minimizing or eliminating the needle cut and other sewing damage problems.

It is an original review work and is helpful for garment manufacturers/researchers to reduce the defects and be able to produce good quality seam.

Durability of textile materials under wet conditions has become very important in recent years. The water repellency performance of fabrics should be maintained in the seam areas. The purpose of this paper is to analyze the effect of water repellent agents and sewing threads on the seam and water repellency performance properties of woven fabrics.

100 percent polyester woven fabrics were treated with three different water repellent finishing agents (silicone, fluorocarbons with 6 and 8 carbons) and then sewn with different sewing threads (unfinished/water repellent finished polyester/cotton corespun and polyamide filament). Afterwards, mechanical properties, seam performance and water repellency properties of these materials were measured.

The effect of finishing which was statistically significant on seam strength only in warp direction was significant on seam elongation and efficiency in both warp and weft directions. Seam strength, seam efficiency, seam slippage and seam pucker of fabrics sewn with polyamide threads were higher than others. The fluorocarbons applied to the fabrics gave higher water repellency values than silicones. In addition, as the chain length increased in fluorocarbons, water repellency performance increased. Sewing process reduced water resistance of fabrics; however, water repellent finish applied to the threads increased water resistance of fabrics.

As a result of the literature review, it was seen that water repellency property of a wear were studied in only seamless areas of fabrics. Originality of this study is that the water repellency properties are also analyzed in the seam areas of the fabrics and evaluated together with the seam performance characteristics.

The purpose of this paper is to propose a rational and complete design scheme of seam type of outdoor clothing, so as to improve the seam efficiency and appearance of outdoor clothing, as well as to provide an optimal seam base for the subsequent pressure adhesive process.

Four types of common outdoor fabrics and four seam types were selected. Seam strength and thickness were measured. Seam efficiency and seam thickness strain were calculated to evaluate seam quality. Multiple linear regression analysis was adopted to analyze the influence of seam type essential factors on seam strength.

Among the component factors of seam type, based on two stitches, seam strength was significantly affected by stitch distance, followed by fabric layer on the seam side. The increase of stitch and the interaction among fabrics can effectively improve the seam efficiency. The methods are as follows: the increase of stitches, stitch distance shortening, the increase of fabric layers, etc. The change of seam type had no significant influence on seam thickness strain. A seam-type design scheme of outdoor clothing with good mechanical and appearance properties was designed by choosing the seam types FX₁, FX₂ and FX₄.

This paper designed a practical scheme of seam-type design of outdoor clothing, which has been applied in the industrial production process. It is important for guiding the improvement of seam quality and the production efficiency of outdoor clothing.

Ultrasonic welding is an emerging apparel manufacturing technique. However, the applications are widely explored in the field of technical textiles, with less exploration in the apparel endues. The purpose of this study is to explore the application of ultrasonic welding in apparel by analyzing the impacts of different parameters.

This study analyzed the influence of ultrasonic welding parameters, including pressure, welding speed and ultrasonic power on the seam performances (seam strength, seam bursting strength, seam thickness and seam stiffness). The parameters are optimized using Box–Behnken experimental design to achieve better seam performances.

The properties of ultrasonic seams are influenced by welding and fabric properties. Ultrasonically welded seams showed better performances in the case of comfort properties of seams, whereas the functional properties are lesser compared to conventional seams.

The findings of the research clearly outline the level of influence of different parameters on the performance of the ultrasonically welded seams in knitted fabrics, which can greatly help in applying ultrasonic welding manufacturing methods in apparel manufacturing.

The properties of polyester/cotton (PC) fabric after chemical treatments as lining in woolen suits has been investigated, as the purpose of this paper is to study the influence of different finishing agents and their concentration on the properties of PC fabrics.

Three different chemical finishes such as anti-slip finish, softener and moisture management finish were applied to currently popular 80/20 PC pocketing fabric at three different concentration levels. A total of 60 seams were produced from 2/1 twill woolen shell fabric and chemically treated lining. Six important tests defining comfort and seam’s quality of lining fabric were chosen, namely, seam strength, seam slippage, stiffness, drape, water vapor transmission (WVT), abrasion resistance to study its properties and testing were done as per standardized test methods.

Chemical treatments affect the properties of PC fabric used as lining significantly in terms of seam strength, seam slippage, WVT and abrasion resistance. Among the three applied chemical finishes softener, at 20, 40 and 60 g/l, was found to be the best choice to make PC fabric suitable in terms of seam performance, durability, drape and comfort for use lining in suits with economic advantage.

The paper contributes to understanding the properties of relatively cheap 80/20 PC pocketing fabric used as lining in a suit.

In Part 1 of this series of papers, we investigated the importance of fabric overfeed in the sewing operations during tailoring. It was also shown how fabric bending rigidity, formability, shear and hygral expansion are important in clothing manufacture. The present paper is concerned with the measurement and experimental study of seam balance, breaking elongation and bending properties of seams. The aim is to evaluate quantitatively the consumption of sewing thread and the relationship between the degree of fabric overfeed during sewing and the curvature of the seam in the garment. Balanced seams have much higher breaking elongation and more symmetrical bending properties than unbalanced seam structures. A natural curvature and curling couple result from fabric overfeed during sewing. The value of the curvature is time‐dependent because of fabric viscoelastic effect and also depends on the level of fabric overfeed, the tensile and longitudinal compressive module of the component fabrics and the structure of the seamed composite. The natural curvature of the seam may be derived quantitatively from the relative lengths of overfeed fabrics using a modified theory for a bimetallic themostatic strip.

The dependence of seam slippage values on fabric construction parameters makes this property an interesting case for study.

In this study, made on a significant wool and blended fabrics sample, the seam slippage was measured, either in warp direction (weft yarns slip), or in weft direction (warp yarns slip), using a specially equipped load‐elongation tester. Testing was done following the TM 117 Woolmark Company test method.

For most fabrics, the conventional variables that impact seam slippage most seriously are opacity, polyamide content, finish type and cover factor.

Since this research does not deal with the variable of yarn crimp in fabrics, it is the cover factor that plays the central role, as the property determining seam slippage. The yarns with lower cover factor (less crimped) are in less danger of slipping between the perpendicular yarns (more crimped) and vice versa.

Based on the equations given, and changing the most relevant variables concerning the explanation of the fabric seam slippage property, the fabric properties can be optimised for specific end‐uses.

Optimisation of seam slippage in fabric design.

This paper aims to define the dominating factors having influence on the quality of the seam by sewing of fine fabrics and their optimum values.

Ten factors defining a seam's quality are chosen on the base of literary research. There was a check for concurrence of specialists' opinions, as the Spearman's coefficient of concordance was determined. A designed experiment with variation of the first three of the arranged factors was made. Mathematical models for the tensile and the aesthetical properties of the seam were devised, and also optimization made.

A classification of the properties, defining seam's quality, is made. A cause‐effect diagram of Ishikawa with aiming parameter – quality of the seam – has been developed. On the basis of a survey the factors that have a great deal of influence on it are presented. Mathematical models for seam's strength, elongation and smoothness are produced by changing the following factors: straining of the upper thread, size of the needle and load on the pressing foot are worked out. Received models are optimized.

The research was conducted using a sewing‐machine class 301. Received results and conclusions refer to seams made from base material – fabric from PES and sewing thread from 100 percent PE.

Optimum values have been established for the straining of the upper thread, the size of the needle and the load on the pressing foot by sewing of fabric from synthetic silk with mass applicable machines, needles, and sewing threads.

The research has been done in several directions: systemizing the seam's properties for evaluation of its quality and the factors defining it, inquiry into the significance of the different factors and implementation of a designed experiment. Consultations were made with a broad circle of specialists and these results are given in visual systems (schemes and graphs).