Search results

This study aims to investigate a critical review on the applications of fluid-structure interaction (FSI) in porous media.

Transport phenomena in porous media are of continuing interest by many researchers in the literature because of its significant applications in engineering and biomedical sectors. Such applications include thermal management of high heat flux electronic devices, heat exchangers, thermal insulation in buildings, oil recovery, transport in biological tissues and tissue engineering. FSI is becoming an important tool in the design process to fully understand the interaction between fluids and structures.

This study is structured in three sections: the first part summarizes some important studies on the applications of porous medium and FSI in various engineering and biomedical applications. The second part focuses on the applications of FSI in porous media as related to hyperthermia. The third part of this review is allocated to the applications of FSI of convection flow and heat transfer in engineering systems filled with porous medium.

To the best knowledge of the present authors, FSI analysis of turbulent flow in porous medium never been studied, and therefore, more attention should be given to this area in any future studies. Moreover, more studies should also be conducted on mixed convective flow and heat transfer in systems using porous medium and FSI.

The wall of the blood vessel is considered as a flexible multilayer porous medium, and therefore, rigid wall analysis is not accurate, and therefore, FSI should be implemented for accurate predictions of flow and hemodynamic stresses.

The use of porous media theory in biomedical applications received a great attention by many investigators in the literature (Khanafer and Vafai, 2006a; Al-Amiri et al., 2014; Lasiello et al., 2016a, Lasiello et al., 2016b; Lasiello et al., 2015; Chung and Vafai, 2013; Mahjoob and Vafai, 2009; Yang and Vafai, 2008; Yang and Vafai, 2006; Ai and Vafai, 2006). A comprehensive review was conducted by Khanafer and Vafai (2006b) summarizing various studies associated with magnetic field imaging and drug delivery. The authors illustrated that the tortuosity and porosity had a profound effect on the diffusion process within the brain. AlAmiri et al. (2014) conducted a numerical study to investigate the effect of turbulent pulsatile flow and heating technique on the thermal distribution within the arterial wall. The results of that investigation illustrated that local heat flux variation along the bottom layer of the tumor was greater for the low-velocity condition. Yang and Vafai (2006) presented a comprehensive four-layer model to study low-density lipoprotein transport in the arterial wall coupled with a lumen (Figure 1). All the four layers (endothelium, intima, internal elastic lamina and media) were modeled as a homogenous porous medium.

Future studies on the applications of FSI in porous media are recommended in this review.

Efficient thermal management of central processing unit (CPU) cooling systems is vital in the context of advancing information technology and the demand for enhanced data processing speeds. This study aims to explore the thermal performance of a CPU cooling setup using a cylindrical porous metal foam heat sink.

Nanofluid flow through the metal foam is simulated using the Darcy–Brinkman–Forschheimer equation, accounting for magnetic field effects. The temperature distribution is modeled through the local thermal equilibrium equation, considering viscous dissipation. The problem’s governing partial differential equations are solved using the similarity method. The CPU’s hot surface serves as a solid wall, with nanofluid entering the heat sink as an impinging jet. Verification of the numerical results involves comparison with existing research, demonstrating strong agreement across numerical, analytical and experimental findings. Ansys Fluent® software is used to assess temperature, velocity and streamlines, yielding satisfactory results from an engineering standpoint.

Investigating critical parameters such as Darcy number (10⁻⁴ ≤ Da_D ≤ 10⁻²), aspect ratio (0.5 ≤ H/D ≤ 1.5), Reynolds number (5 ≤ Re_D,bf ≤ 3500), Eckert number (0 ≤ EC_bf ≤ 0.1) , porosity (0.85 ≤ ε ≤ 0.95), Hartmann number (0 ≤ Ha_D,bf ≤ 300) and the volume fraction of nanofluid (0 ≤ φ ≤ 0.1) reveals their impact on fluid flow and heat sink performance. Notably, Nusselt number will reduce 45%, rise 19.2%, decrease 14.1%, and decrease 0.15% for Reynolds numbers of 600, with rising porosity from 0.85 to 0.95, Darcy numbers from 10⁻⁴ to 10⁻², Eckert numbers from 0 to 0.1, and Hartman numbers from 0 to 300.

Despite notable progress in studying thermal management in CPU cooling systems using porous media and nanofluids, there are still significant gaps in the existing literature. First, few studies have considered the Darcy–Brinkman–Forchheimer equation, which accounts for non-Darcy effects and the flow and geometric interactions between coolant and porous medium. The influence of viscous dissipation on heat transfer in this specific geometry has also been largely overlooked. Additionally, while nanofluids and impinging jets have demonstrated potential in enhancing thermal performance, their utilization within porous media remains underexplored. Furthermore, the unique thermal and structural characteristics of porous media, along with the incorporation of a magnetic field, have not been fully investigated in this particular configuration. Consequently, this study aims to address these literature gaps and introduce novel advancements in analytical modeling, non-Darcy flow, viscous dissipation, nanofluid utilization, impinging jets, porous media characteristics and the impact of a magnetic field. These contributions hold promising prospects for improving CPU cooling system thermal management and have broader implications across various applications in the field.

The purpose of this study is to analyze the impacts of combined utilization of multi-jet impinging cooling of nanofluids with magnetic field and porous layer on the cooling performance, as effective cooling with impinging jets are obtained for various energy systems, including photovoltaic panels, electronic cooling and many other convective heat transfer applications.

Finite element method is used to explore the magnetic field effects with the inclusion of porous layer on the cooling performance efficiency of slot nanojet impingement system. Impacts of pertinent parameters such as Reynolds number (Re between 250 and 1,000), strength of magnetic field (Ha between 0 and 30), permeability of the porous layer (Da between 0.001 and 0.1) on the cooling performance for flat and wavy surface configurations are explored.

It is observed that the average Nusselt number (Nu) rises by about 17% and 20.4% for flat and wavy configuration while temperature drop of 4 K is obtained when Re is increased to 1,000 from 250. By using magnetic field at the highest strength, the average Nu rises by about 29% and 7% for flat and wavy cases. Porous layer permeability is an effective way of controlling the cooling performance while up to 44.5% variations in the average Nu is obtained by varying its value. An optimization routine is used to achieve the highest cooling rate while the optimum parameter set is obtained as (Re, Ha, Da, γ, sx) = (1,000, 30, 0.07558, 86.28, 2.585) for flat surface and (Re, Ha, Da, γ, sx) = (1,000, 30, 0.07558, 71.85, 2.329) for wavy surface configurations.

In thermal systems, cooling system design is important for thermal management of various energy systems, including fuel cells, photovoltaic panels, electronic cooling and many others. Impinging jets are considered as effective way of cooling because of its ability to give higher local heat transfer coefficients. This paper offers novel control tools, such as magnetic field, installation of porous layer and hybrid nano-liquid utilization for control of cooling performance with multiple impinging jets.

The purpose of this paper is to investigate thermally and hydrodynamically fully developed convection in a duct of rectangular cross-section containing a porous medium and fluid layer.

The Darcy–Brinkman–Forchheimer flow model is adopted. A finite difference method of second-order accuracy with the Southwell-over-relaxation method is deployed to solve the non-dimensional momentum and energy conservation equations under physically robust boundary conditions.

It is found that the presence of porous structure and different immiscible fluids exert a significant impact on controlling the flow. Graphical results for the influence of the governing parameters i.e. Grashof number, Darcy number, porous media inertia parameter, Brinkman number and ratios of viscosities, thermal expansion and thermal conductivity parameters on the velocity and temperature fields are presented. The volumetric flow rate, skin friction and rate of heat transfer at the left and right walls of the duct are also provided in tabular form. The numerical solutions obtained are validated with the published study and excellent agreement is attained.

To the author’s best knowledge this study original in developing the numerical code using FORTRAN to assess the fluid properties for immiscible fluids. The study is relevant to geothermal energy systems, thermal insulation systems, resin flow modeling for liquid composite molding processes and hybrid solar collectors.

This study aims to undertake a comprehensive examination of heat transfer by convection in porous systems with top and bottom walls insulated and differently heated vertical walls under a magnetic field. For a specific nanofluid, the study aims to bring out the effects of different segmental heating arrangements.

An existing in-house code based on the finite volume method has provided the numerical solution of the coupled nondimensional transport equations. Following a validation study, different explorations include the variations of Darcy–Rayleigh number (Ra_m = 10–10⁴), Darcy number (Da = 10^–5–10^–1) segmented arrangements of heaters of identical total length, porosity index (ε = 0.1–1) and aspect ratio of the cavity (AR = 0.25–2) under Hartmann number (Ha = 10–70) and volume fraction of φ = 0.1% for the nanoparticles. In the analysis, there are major roles of the streamlines, isotherms and heatlines on the vertical mid-plane of the cavity and the profiles of the flow velocity and temperature on the central line of the section.

The finding of a monotonic rise in the heat transfer rate with an increase in Ra_m from 10 to 10⁴ has prompted a further comparison of the rate at Ra_m equal to 10⁴ with the total length of the heaters kept constant in all the cases. With respect to uniform heating of one entire wall, the study reveals a significant advantage of 246% rate enhancement from two equal heater segments placed centrally on opposite walls. This rate has emerged higher by 82% and 249%, respectively, with both the segments placed at the top and one at the bottom and one at the top. An increase in the number of centrally arranged heaters on each wall from one to five has yielded 286% rate enhancement. Changes in the ratio of the cavity height-to-length from 1.0 to 0.2 and 2 cause the rate to decrease by 50% and increase by 21%, respectively.

Further research with additional parameters, geometries and configurations will consolidate the understanding. Experimental validation can complement the numerical simulations presented in this study.

This research contributes to the field by integrating segmented heating, magnetic fields and hybrid nanofluid in a porous flow domain, addressing existing research gaps. The findings provide valuable insights for enhancing thermal performance, and controlling heat transfer locally, and have implications for medical treatments, thermal management systems and related fields. The research opens up new possibilities for precise thermal management and offers directions for future investigations.

The purpose of this paper is to analytically perform gaseous slip flow and heat transfer analysis within a parallel-plate microchannel partially filled with a centered porous medium under local thermal non-equilibrium (LTNE) condition. Heat transfer of gaseous flow in a porous microchannel is analytically studied. Energy communication at the porous-fluid interface is considered by two approaches: the gas rarefaction negatively impacts the heat transfer performance, and the optimum ratio of porous thickness is found to be around 0.8.

Both Models A and B are utilized to consider the heat flux splitting for the fluid and solid phases at the porous-fluid interface.

Analytical solutions for the fluid and solid phase temperature distributions and the Nusselt number are derived. In the no-slip flow limit, the present analytical solutions are validated by the partially and fully filled cases available in the literature.

The continuum flow (no-slip flow) is only a special case of the slip flow. Meanwhile, the effects of pertinent parameters on the heat transfer are also discussed.

A survey of available literature mentioned above indicates a shortage of information for slip flow and heat transfer in partially filled porous systems. The main objective of the present study is to investigate the slip flow and heat transfer characteristics for forced convection through a microchannel partially filled with a porous medium under LTNE condition. The porous substrate is placed at the center of the microchannel. Analytical solutions for the temperature distributions of the fluid and solid phases and the Nusselt number at the microchannel wall are obtained.

Heat transfer of gaseous flow in a porous microchannel is analytically studied. Energy communication at the porous-fluid interface is considered by two approaches: the gas rarefaction negatively impacts the heat transfer performance, and the optimum ratio of porous thickness is found to be around 0.8. Gaseous slip flow and heat transfer analysis is analytically performed within a parallel-plate microchannel partially filled with a centered porous medium under LTNE condition. Analytical solutions for the fluid and solid phase temperature distributions and the Nusselt number are derived for the first time. The effects of pertinent parameters on the heat transfer are also discussed. Compared with the results obtained for the continuum flow regime, the gas rarefaction negatively impacts the heat transfer efficiency and has little influence on the optimal porous thickness.

This study aims to focus on a thermo-fluid flow in a partially driven cavity (PDC) using Cu-water nanoliquid, magnetic field and porous substance. The cooling and sliding motion are applied on the upper half of the vertical walls and the bottom wall is heated. Thermal characteristics are explored to understand magnetohydrodynamic convection in a nanoliquid filled porous system from a fundamental viewpoint. The governing parameters involved to cater to the moving speed of the sidewalls and partial translation direction are the relative strength of thermal buoyancy, porous substance permeability, magnetic field intensity, nanoparticle suspension and orientation of the cavity.

The coupled transport equations of the problem are solved using an in-house developed finite volume-based computing code. The staggered nonuniform grids along the x and y directions are used. The SIMPLE algorithm technique is considered for the iterative solution of the discretized equations with the convergence check of the continuity mass defect below 10^–10.

The present study unveils that the heat transfer enhances at higher Ri with the increasing value of Re, irrespective of the presence of a porous substance or magnetic field or the concentration of nanofluid. Apart from different flow controlling parameters, the wall motions have a significant contribution to the formation of flow vortices and corresponding heat transfer. Orientation of the cavity significantly alters the transport process within the cavity. The upward wall velocity for both the sidewalls could be a better choice to enhance the high heat transfer (approximately 88.39% at Richardson and Reynolds numbers, respectively, 0.1 and 200).

Considering other multi-physical scenarios like porous layers, conducting block, microorganisms and the present investigation could be further extended to analyze a problem of complex flow physics.

In this study, the concept of partially driven wall motion has been adopted under the Cu-water nanoliquid, magnetic field, porous substance and oblique enclosure. All the involved flow-controlling parameters have been experimented with under a wide parametric range and associated thermo-flow physics are analyzed in detail. This outcome of this study can be very significant for designing as well as controlling thermal devices.

The convective process in a partially driven cavity (PDC) with the porous medium has not been investigated in detail considering the multi-physical scenarios. Thus, the present effort is motivated to explore the thermal convection in such an oblique enclosure. The enclosure is heated at its bottom and has partially moving-wall cold walls. It consists of various multi-physical conditions like porous structure, magnetic field, Cu–H₂O nanoliquid, etc. The system performance is addressed under different significant variables such as Richardson number, Reynolds number, Darcy number, Hartmann number, nanoliquid concentration and orientation of cavity.

The purpose of this study is to examine the effects of using discrete and continuous porous layers on the convective heat transfer improvement for multiple slot jet impingement onto a flat surface under magnetic field.

In the domains which are separated by the porous layers, uniform magnetic field with different strengths is used and as the solution technique finite element method is used. The numerical study is conducted considering different values of parameters: Reynolds number (250–1000), strength of magnetic field in different domains (Hartmann number between 0 and 20), permeability of discrete or continuous layers (Darcy number between 105 and 102) and number of layers in discrete case (2–10). Artificial neural network is used for performance estimation of systems equipped with different types of porous layers.

It is observed that significant differences occur in the local Nu between the discrete and continuous layer case, especially at lower Re, while peak Nu value is 77% higher in discrete layer configurations as compared to continuous one at Re = 250. Upper domain magnetic field results in average Nu enhancement, while the trend is opposite for the lower domain magnetic field strength. The increment amount becomes 10%, while the reduction amount is obtained as 38% at the highest magnetic field strengths. The permeability of layers in both cases and number of layers in discrete porous layer case provide effective solution for the cooling performance control. A modeling approach based on artificial neural networks provides fast thermal performance estimations of multiple impinging jets equipped with discrete and continuous porous layers.

Outcomes of the study are useful in development and optimization of new cooling systems in many thermal engineering systems encountered in photovoltaic panels, micro-electro-mechanical systems, metal processing and many others.

This study aims to numerically examine the influence of various geometric parameters of a novel W-shaped porous cavity undergoing hybrid nanofluid-based magnetohydrodynamic mixed convection. The W-shaped cavity is modified from the classical trapezoidal cavity by constructing a triangular shape at its bottom. This cavity is isothermally active at the bottom, with different numbers and heights of the triangular peak (or undulation). The heated hybrid nanofluid (Cu–Al₂O₃–H₂O) flow is cooled through the translating top wall. Inclined sidewalls are thermally insulated. To compare the impacts of change in geometric parameters, a square cavity under similar boundary conditions is also simulated. This study is carried out systematically addressing the various influences from a range of parameters like side angles (γ), number (m) and height (λ) of the bottom undulation, Reynolds number (Re), Richardson number (Ri), Darcy number (Da), Hartmann number (Ha), hybrid nanoparticles volume fraction (φ) on the overall thermal performance of the cavity.

Applying the finite volume approach, the transport equations involving multiphysical conditions like porous substance, hybrid nanofluid, magnetic field and shearing force are solved numerically by using a written FORTRAN-based code following the SIMPLE algorithm. The algebraic equations are solved over all the control volumes in an iterative process using the alternate direction implicit scheme and the tri-diagonal matrix algorithm. The converged solution of the iterative process is obtained when the relative error levels satisfy the convergence criterion of 10^–8 and 10^–10 for the maximum residuals and the mass defect, respectively.

It is revealed that an increase in the bottom undulation height always improves the thermal energy transfer despite the reduction of fluid volume. Thermal energy transfer significantly depends on the heating and cooling surface lengths, fluid volume in the cavity and the magnitude of the bottom undulation height of the W-shaped cavity. With the increase in bottom undulation height, effective heating length increases by ∼28%, which leads to a ∼15% reduction in the effective volume of the working fluid and a gain in heat transfer by ∼56.48%. In general, the overall thermal energy transport is improved by increasing Re, Ri and Da; whereas it is suppressed by increasing Ha.

There are many opportunities for future research experimentally or numerically, considering different curvature effects, orientations of the geometry, working fluids, boundary conditions, etc. Furthermore, this study could be extended by considering unsteady flow or turbulent flow.

In many modern systems/processes pertaining to materials processing, continuous casting, food processing, chemical reactors, biomedical applications, etc. fine control in the transport process is a major concern. The findings of this analysis can effectively be useful for other applications for getting more control features in terms of achieving the operational objectives. The approach of the system analysis (considering geometrical size parameters to delve into the underlying transport physics) and the obtained simulated results presented in the work can usefully be applicable to similar thermal systems/devices such as materials processing, thermal mixing, chemical reactors, heat exchangers, etc.

From the well-documented and vast pool of literature survey, it is understood that there exists no such investigation on the considered geometry and study. This study contributes a lot to understanding magnetic field moderated thermofluid flow of a hybrid nanofluid in a porous medium filled W-shaped cavity, in consideration of different geometrical shape parameters (undulation peak numbers at bottom wall, peak heights, side angles and heating and cooling length). Findings brought by this study provide great insights into the design and operation under various ranges of multiphysical thermofluid-flow processing phenomena.

This paper aims to present a study on stability analysis of Jeffrey fluids in the presence of emergent chemical gradients within microbial systems of anisotropic porous media.

This study uses an effective method that combines non-dimensionalization, normal mode analysis and linear stability analysis to examine the stability of Jeffrey fluids in the presence of emergent chemical gradients inside microbial systems in anisotropic porous media. The study focuses on determining critical values and understanding how temperature gradients, concentration gradients and chemical reactions influence the onset of bioconvection patterns. Mathematical transformations and analytical approaches are used to investigate the system’s complicated dynamics and the interaction of numerous characteristics that influence stability.

The analysis is performed using the Jeffrey-Darcy type and Boussinesq estimation. The process involves using non-dimensionalization, using the normal mode approach and conducting linear stability analysis to convert the field equations into ordinary differential equations. The conventional thermal Rayleigh Darcy number RDa,c is derived as a comprehensive function of various parameters, and it remains unaffected by the bio convection Lewis number Łe. Indeed, elevating the values of ζ and γ′ in the interval of 0 to 1 has been noted to expedite the formation of bioconvection patterns while concurrently expanding the dimensions of convective cells. The purpose of this investigation is to learn how the temperature gradient affects the concentration gradient and, in turn, the stability and initiation of bioconvection by taking the Soret effect into the equation. The results provide insightful understandings of the intricate dynamics of fluid systems affected by chemical and biological elements, providing possibilities for possible industrial and biological process applications. The findings illustrate that augmenting both microbe concentration and the bioconvection Péclet number results in an unstable system. In this study, the experimental Rayleigh number RDa,c was determined to be 4π2at the critical wave number ( δcˇ) of π.

The study’s novelty originated from its investigation of a novel and complicated system incorporating Jeffrey fluids, emergent chemical gradients and anisotropic porous media, as well as the use of mathematical and analytical approaches to explore the system’s stability and dynamics.