Search results

Fluid flow and heat transfer in a dual scale porous media is investigated to determine the interfacial convective heat transfer coefficient, numerically. The studied porous media is a periodic dual scale porous media. It consists of the square rods which are permeable in an aligned arrangement. It is aimed to observe the enhancement of heat transfer through the porous media, which is important for thermal designers, by inserting intra-pores into the square rods. A special attention is given to the roles of size and number of intra-pores on the heat transfer enhancement through the dual scale porous media. The role of intra-pores on the pressure drop of air flow through porous media is also investigated by calculation and comparison of the friction coefficient.

To calculate the interfacial convective heat transfer coefficient, the governing equations which are continuity, momentum and energy equations are solved to determine velocity, pressure and temperature fields. As the dual scale porous structure is periodic, a representative elementary volume is generated, and the governing equations are numerically solved for the selected representative volume. By using the obtained velocity, pressure and temperature fields and using volume average definition, the volume average of aforementioned parameters is calculated and upscaled. Then, the interfacial convective heat transfer coefficient and the friction coefficient is numerically determined. The interparticle porosity is changed between 0.4 and 0.75, while the intraparticle varies between 0.2 and 0.75 to explore the effect of intra-pore on heat transfer enhancement.

The obtained Nusselt number values are compared with corresponding mono-scale porous media, and it is found that heat transfer through a porous medium can be enhanced threefold (without the increase of pressure drop) by inserting intraparticle pores in flow direction. For the porous media with low values of interparticle porosity (i.e. = 0.4), an optimum intraparticle porosity exists for which the highest heat transfer enhancement can be achieved. This value was found around 0.3 when the interparticle porosity was 0.4.

The results of the study are interesting, especially from heat transfer enhancement point of view. However, further studies are required. For instance, studies should be performed to analyze the rate of the heat transfer enhancement for different shapes and arrangements of particles and a wider range of porosity. The other important parameter influencing heat transfer enhancement is the direction of pores. In the present study, the intraparticle pores are in flow direction; hence, the enhancement rate of heat transfer for different directions of pores must also be investigated.

The application of dual scale porous media is widely faced in daily life, nature and industry. The flowing of a fluid through a fiber mat, woven fiber bundles, multifilament textile fibers, oil filters and fractured porous media are some examples for the application of the heat and fluid flow through a dual scale porous media. Heat transfer enhancement.

The enhancement of heat transfer is a significant topic that gained the attention of researchers in recent years. The importance of topic increases day-by-day because of further demands for downsizing of thermal equipment and heat recovery devices. The aim of thermal designers is to enhance heat transfer rate in thermal devices and to reduce their volume (and/or weight in some applications) by using lower mechanical power for cooling.

The present study might be the first study on determination of thermal transport properties of dual scale porous media yielded interesting results such as considerable enhancement of heat transfer by using proper intraparticle channels in a porous medium.

The purpose of this study is to theoretically analyze the laminar free convection heat transfer of nanofluids in a square cavity. The sidewalls of the cavity are subject to temperature difference, whereas the bottom and top are insulated. Based on the available experimental results in the literature, two new non-dimensional parameters, namely, the thermal conductivity parameter (Nc) and dynamic viscosity parameter (Nv) are introduced. These parameters indicate the augmentation of the thermal conductivity and dynamic viscosity of the nanofluid by dispersing nanoparticles.

The governing equations are transformed into non-dimensional form using the thermo-physical properties of the base fluid. The obtained governing equations are solved numerically using the finite element method. The results are reported for the general non-dimensional form of the problem as well as case studies in the form of isotherms, streamlines and the graphs of the average Nusselt number. Using the concept of Nc and Nv, some criteria for convective enhancement of nanofluids are proposed. As practical cases, the effect of the size of nanoparticles, the shape of nanoparticles, the type of nanoparticles, the type of base fluids and working temperature on the enhancement of heat transfer are analyzed.

The results show that the increase of the magnitude of the Rayleigh number increases of the efficiency of using nanofluids. The type of nanoparticles and the type of the base fluid significantly affects the enhancement of using nanofluids. Some practical cases are found, in which utilizing nanoparticles in the base fluid results in deterioration of the heat transfer. The working temperature of the nanofluid is very crucial issue. The increase of the working temperature of the nanofluid decreases the convective heat transfer, which limits the capability of nanofluids in decreasing the size of the thermal systems.

In the present study, a separation line based on two non-dimensional parameters (i.e. Nc and Nv) are introduced. The separation line demonstrates a boundary between augmentation and deterioration of heat transfer by using nanoparticles. Indeed, by utilizing the separation lines, the convective enhancement of using nanofluid with a specified Nc and Nv can be simply estimated.

The purpose of this paper is to enhance the heat transfer and thermal performance in the trailing edge region of the vane with vortex generators (VGs).

This numerical study presents the enhancement of thermal performance in the trailing part of a gas turbine blade. In the trailing part, generally, pin fins are used either in staggered or in-line arrangements to enhance the heat transfer. In this study, based on the idea from heat exchangers, pin fins are combined with VGs. A pair of VGs is embedded in the boundary layer upstream of each pin fin in the first row of the pin fin array having an in-line configuration. The effects of the VG angle relative to the streamwise direction and streamwise distance between the pin fin and VGs are investigated at various Reynolds numbers.

The results indicated that the endwall heat transfer is enhanced with the addition of VGs and the heat transfer from the surfaces of the pin fins. The level of heat transfer enhancement compared to the case without VGs is more significant at high Reynolds number. The surfaces of the VGs also show a significant amount of heat transfer. Study of the angle of the attack suggested that a high angle of attack is more appropriate for pin fin cooling enhancement whereas an intermediate gap between the VGs and pin fins shows considerable improvement of thermal performance compared to the small and large gaps. The phenomenon of heat transfer augmentation with the VGs is demonstrated by the flow field. It shows that the enhancement of heat transfer is governed by the mixing of the flow as a result of the interaction of vortices generated by the VGs and pin fins.

VGs are used to disturb the thermal boundary layer. It shows that heat transfer is augmented as a result of the interaction of vortices associated with VGs and pin fins.

This study aims to enhance natural convection heat transfer for a porous thermal cavity. Multi-frequency sinusoidal heating is applied at the bottom of a porous square cavity, considering top wall adiabatic and cooling through the sidewalls. The different frequencies, amplitudes and phase angles of sinusoidal heating are investigated to understand their major impacts on the heat transfer characteristics.

The finite volume method is used to solve the governing equations in a two-dimensional cavity, considering incompressible laminar flow, Boussinesq approximation and Brinkman–Forchheimer–Darcy model. The mean-temperature constraint is applied for enhancement analysis.

The multi-frequency heating can markedly enhance natural convection heat transfer even in the presence of porous medium (enhancement up to ∼74 per cent). Only the positive phase angle offers heat transfer enhancement consistently in all frequencies (studied).

The present research idea can usefully be extended to other multi-physical areas (nanofluids, magneto-hydrodynamics, etc.).

The findings are useful for devices working on natural convection.

The enhancement using multi-frequency heating is estimated under different parametric conditions. The effect of different frequencies of sinusoidal heating, along with the uniform heating, is collectively discussed from the fundamental point of view using the average and local Nusselt number, thermal and hydrodynamic boundary layers and heatlines.

With development of the modern electronic and mechanical devices, cooling requirement has become a serious challenge. Innovative heat transfer enhancement methods are generally accompanied by undesirable increase of pressure drop and consequently a pumping power penalty. The current study aims to present a novel and easy method to manufacture a mini heat sink using porous fins and magnetite nanofluid (Fe₃O₄/water) as the coolant for simultaneous heat transfer enhancement and pressure drop reduction.

A three-dimensional numerical study is carried out to evaluate the thermal and hydrodynamic performance of the mini heat sink at different volume fractions, porosities and Reynolds numbers, using finite volume method. The solver specifications for discretization of the domain involve the SIMPLE, second-order upwind and second order for pressure, momentum and energy, respectively.

Results show that porous fins have a favorable effect on both heat transfer and pressure drop compared to solid fins. Creation of a virtual velocity slip on the channel-fin interfaces similar to the micro scale conditions and the flow permeation into the porous fins are the main mechanisms of pressure drop reduction. On the other hand, the heat transfer enhancement is attributed to the increase of the solid-fluid contact area and the improvement of the flow mixing because of the flow permeation into the porous fins. An optimal porosity for maximum convective heat transfer enhancement is obtained as a function of Reynolds number. However, taking both pressure drop and heat transfer effects into account, the overall heat sink performance is shown to be improved at high of Reynolds numbers, volume fractions and fin porosities.

Thermal radiation and gravity effects are ignored, and thermal equilibrium is assumed between solid and fluid phases.

A maximum of 32 per cent increase of convective heat transfer is achieved along with a maximum of 33 per cent reduction in the pressure drop using porous fins and ferrofluid in heat sink.

To investigate the forced convection heat transfer to hydrodynamically and thermally fully developed laminar steady flow of power‐law non‐Newtonian fluid in a partially porous square duct.

The modified Brinkmann‐Forchheimer extended Darcy model for power‐law fluids is used in the porous layer. The solutions for the velocity and temperature fields are obtained numerically using the finite volume method. Computations are performed over a range of Darcy number, power‐law indices, porous insert thickness and thermal conductivity ratio.

The average Nusselt number and the Fanning factor, so obtained are found to be in good agreement with the literature. It is highlighted that a heat transfer improvement is obtained when the channel is entirely porous and this enhancement is maximized at low permeability. While depending on the working conditions, heat transfer enhancement can also be obtained by filling partially the duct with the porous insert, even if the conductivity ratio is equal to 1. The results indicate also that the conductivity ratio has a strong impact on the heat transfer enhancement at high permeability, while this impact is significant beyond a critical thickness of the porous layer at low permeability. It is found that both shear‐thinning (n<1) and shear‐thickening (n>1) fluids allow obtaining the highest Nusselt number according to the properties of the porous insert. The presence of the porous insert causes a significant increase in pressure drop. This added pressure drop is found to be more important with shear thickening fluids (n>1).

The results of this paper are valid for square ducts and H1 thermal boundary condition, corresponding to an axially uniform heat flux and peripherally uniform temperature. The inertial effects are neglected in the porous region.

The obtained results can be used in the design of heat exchangers and in the cooling of electronic equipments.

This work investigates some interesting ways to enhance heat transfer in three‐dimensional square ducts by using porous substrates and non‐Newtonian fluids. It is believed that the case studied in this paper has not previously been investigated.

This paper aims to deal with heat transfer enhancement because of transverse vibration on counter flow concentric pipe heat exchanger. Experiments were performed at different vibrator positions with varying amplitudes and frequencies.

Tests are carried out at 4 different vibration frequencies (20, 40, 60 and 100 Hz), 3 vibration amplitudes (23, 46 and 69 mm) and at 3 vibrator positions (1/4, 1/2 and 3/4 of pipe length) with respect to hot water inlet under turbulent flow condition.

Experimental results indicate that Nusselt number is enhanced to a maximum extent of 44% with vibration when compared to Nusselt number without vibration at a frequency of 40 Hz, an amplitude of 69 mm and at a vibrator position of one-fourth of pipe length with respect to hot water inlet.

Empirical correlation is developed from experimental data to estimate the heat transfer coefficient with vibration for experimental frequency range with an error estimate of approximately ±10%.

The purpose of this study is to analyze the nonhomogeneous model on the mixed convection of Al2O3–Fe3O4 Bingham plastic hybrid nanofluid in a ventilated enclosure subject to an externally imposed uniform magnetic field. Entropy generation and the pressure drop are determined to analyze the performance of the heat transfer. The significance of Joule heating arising due to the applied magnetic field on the heat transfer of the yield stress fluid is described.

The ventilation in the enclosure of heated walls is created by an opening on one vertical wall through which cold fluid is injected and another opening on the opposite vertical wall through which fluid can flow out.

This study finds that the inclusion of Fe₃O₄ nanoparticles with the Al₂O₃-viscoplastic nanofluid augments the heat transfer. This rate of enhancement in heat transfer is higher than the rate by which the entropy generation is increased as well as the enhancement in the pressure drop. The yield stress has an adverse effect on the heat transfer; however, it favors thermal mixing. The magnetic field, which is acting opposite to the direction of the inlet jet, manifests heat transfer of the viscoplastic hybrid nanofluid. The horizontal jet of cold fluid produces the optimal heat transfer.

The objective of this study is to analyze the impact of the inclined cold jet of viscoplastic electrically conducting hybrid nanofluid on heat transfer from the enclosure in the presence of a uniform magnetic field. The combined effect of hybrid nanoparticles and a magnetic field to enhance heat transfer of a viscoplastic fluid in a ventilated enclosure has not been addressed before.

The purpose of this paper is to numerically investigate the heat transfer performance of aviation kerosene flowing in smooth and enhanced tubes with asymmetric fins at supercritical pressures and to reveal the effects of several key parameters, such as mass flow rate, heat flux, pressure and inlet temperature on the heat transfer.

A CFD approach is taken and the strong variations of the thermo-physical properties as the critical point is passed are taken into account. The RNG k-ε model is applied for simulating turbulent flow conditions.

The numerical results reveal that the heat transfer coefficient increases with increasing mass flow rate and inlet temperature. The effect of heat flux on heat transfer is more complicated, while the effect of pressure on heat transfer is insignificant. The considered asymmetric fins have a small effect on the fluid temperature, but the wall temperature is reduced significantly by the asymmetric fins compared to that of the corresponding smooth tube. As a result, the asymmetric finned tube leads to a significant heat transfer enhancement (an increase in the heat transfer coefficient about 23-41 percent). The enhancement might be caused by the re-development of velocity and temperature boundary layers in the enhanced tubes. With the asymmetric fins, the pressure loss in the enhanced tubes is slightly larger than that in the smooth tube. A thermal performance factor is applied for combined evaluation of heat transfer enhancement and pressure loss.

The asymmetric fins also caused an increased pressure loss. A thermal performance factor ? was used for combined evaluation of heat transfer enhancement and pressure loss. Results show that the two enhanced tubes perform better than the smooth tube. The enhanced tube 2 gave better overall heat transfer performance than the enhanced tube 1. It is suggested that the geometric parameters of the asymmetric fins should be optimized to further improve the thermal performance and also various structures need to be investigated.

The asymmetric fins increased the pressure loss. The evaluation of heat transfer enhancement and pressure loss Results showed that the two enhanced tubes perform better than the smooth tube. It is suggested that the geometric parameters of the asymmetric fins should be optimized to further improve the thermal performance and also various structures need to be investigated to make the results more engineering useful.

The paper presents unique solutions for thermal performance of a fluid at near critical state in smooth and enhanced tubes. The findings are of relevance for design and thermal optimization particularly in aerospace applications.

To investigate the heat transfer enhancement performed by installing a rectangular plate turbulator for internal flow modification induced by vortex shedding.

The large eddy simulation (LES) and SIMPLE‐C method coupled with preconditioned conjugate gradient methods have been applied to the turbulent flow field and heat transfer enhancement of mixed convection in a block‐heated channel.

Provides information about heat transfer performance indicating that heat transfer performance can be affected by various width‐to‐height ratio of turbulator and Grasehof numbers with a constant Reynolds number. The results show that the installation of turbulator in cross‐flow above an upstream block can effectively enhance the heat transfer performance by suitable width‐to‐height ratio of turbulator and Grasehof numbers.

It is limited to two‐dimensional mean flow for the turbulent vortex‐shedding flow past a long square cylinder.

A very useful source of information and favorable advice for people developing heat transfer enhancement for electronic devices.

The results of this study may be of interest to engineers attempting to develop thermal control of electronic devices and to researchers interested in the turbulent flow‐modification aspects of heat transfer enhancement of mixed convection in a vertical channel.