Search results
1 – 10 of 889Abstract
Details
Keywords
Tugdual Amaury Le Néel, Pascal Mognol and Jean-Yves Hascoët
The purpose of this paper is to analyze the current state of the art manufacturing techniques using sand molds for the casting industry by the means of additive manufacturing…
Abstract
Purpose
The purpose of this paper is to analyze the current state of the art manufacturing techniques using sand molds for the casting industry by the means of additive manufacturing (AM). In particular, this review will cover two families of 3D printing in regards to sand mold fabrication.
Design/methodology/approach
This paper will discuss the sand casting manufacturing processes of AM by binder jetting (3D printing) and selective laser sintering. Scientific articles, patents and case studies are analyzed. Topics ranging from the technology types to the economic implications are covered.
Findings
The review investigates new factors and methods for mold design, looking at mechanical properties and cost analysis as influenced by material selection, thermal characteristics, topological optimization and manufacturing procedure. Findings in this study suggest that this topic lacks vigorous scientific research and that the case studies by manufacturers thus far are not useful.
Research limitations/implications
As demonstrated by the limited data from previous published studies, a more comprehensive and conclusive analysis is needed due to the lack of interest and resources regarding the AM of sand molds.
Practical implications
This study is a useful tool for any researchers with an interest in the field of AM of sand molds.
Social implications
Key perspectives are proposed.
Originality/value
This review highlights current gaps in this field. The review goes beyond the scientific articles by curating patents and professional case studies.
Details
Keywords
Cassandra Telenko and Carolyn Conner Seepersad
The purpose of this paper is to evaluate the energy consumed to fabricate nylon parts using selective laser sintering (SLS) and to compare it with the energy consumed for…
Abstract
Purpose
The purpose of this paper is to evaluate the energy consumed to fabricate nylon parts using selective laser sintering (SLS) and to compare it with the energy consumed for injection molding (IM) the same parts.
Design/methodology/approach
Estimates of energy consumption include the energy consumed for nylon material refinement, adjusted for SLS and IM process yields. Estimates also include the energy consumed by the SLS and IM equipment for part fabrication and the energy consumed to machine the injection mold and refine the metal feedstock required to fabricate it. A representative part is used to size the injection mold and to quantify throughput for the SLS machine per build.
Findings
Although SLS uses significantly more energy than IM during part fabrication, this energy consumption is partially offset by the energy consumption associated with production of the injection mold. As a result, the energy consumed per part for IM decreases with the number of parts fabricated while the energy consumed per part for SLS remains relatively constant as long as builds are packed efficiently. The crossover production volume, at which IM and SLS consume equivalent amounts of energy per part, ranges from 50 to 300 representative parts, depending on the choice of mold plate material.
Research limitations/implications
The research is limited to material refinement and part fabrication and does not consider other aspects of the life cycle, such as waste disposal, distributed 2 manufacturing, transportation, recycling or use. Also, the crossover volumes are specific to the representative part and are expected to vary with part geometry.
Originality/value
The results of this comparative study of SLS and IM energy consumption indicate that manufacturers can save energy using SLS for parts with small production volumes. The comparatively large amounts of nylon material waste and energy consumption during fabrication make it inefficient, from an energy perspective, to use SLS for higher production volumes. The crossover production volume depends on the geometry of the part and the choice of material for the mold.
Details
Keywords
Radhwan Bin Hussin, Safian Bin Sharif, Shayfull Zamree Bin Abd Rahim, Mohd Azlan Bin Suhaimi, Mohd Tanwyn Bin Mohd Khushairi, Abdellah Abdellah EL-Hadj and Norshah Afizi Bin Shuaib
Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype…
Abstract
Purpose
Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype applications, especially in the development of new products. The purpose of this study is to analyze the current application trends of RT techniques in producing hybrid mold inserts.
Design/methodology/approach
The direct and indirect RT techniques discussed in this paper are aimed at developing a hybrid mold insert using metal epoxy composite (MEC) in increasing the speed of tooling development and performance. An extensive review of the suitable development approach of hybrid mold inserts, material preparation and filler effect on physical and mechanical properties has been conducted.
Findings
Latest research studies indicate that it is possible to develop a hybrid material through the combination of different shapes/sizes of filler particles and it is expected to improve the compressive strength, thermal conductivity and consequently increasing the hybrid mold performance (cooling time and a number of molding cycles).
Research limitations/implications
The number of research studies on RT for hybrid mold inserts is still lacking as compared to research studies on conventional manufacturing technology. One of the significant limitations is on the ways to improve physical and mechanical properties due to the limited type, size and shape of materials that are currently available.
Originality/value
This review presents the related information and highlights the current gaps related to this field of study. In addition, it appraises the new formulation of MEC materials for the hybrid mold inserts in injection molding application and RT for non-metal products.
Details
Keywords
Munish Chhabra and Rupinder Singh
This paper seeks to review the industrial applications of state‐of‐the‐art additive manufacturing (AM) techniques in metal casting technology. An extensive survey of concepts…
Abstract
Purpose
This paper seeks to review the industrial applications of state‐of‐the‐art additive manufacturing (AM) techniques in metal casting technology. An extensive survey of concepts, techniques, approaches and suitability of various commercialised rapid casting (RC) solutions with traditional casting methods is presented.
Design/methodology/approach
The tooling required for producing metal casting such as fabrication of patterns, cores and moulds with RC directly by using different approaches are presented and evaluated. Relevant case studies and examples explaining the suitability and problems of using RC solutions by various manufacturers and researchers are also presented.
Findings
Latest research to optimize the current RC solutions, and new inventions in processing techniques and materials in RC performed by researchers worldwide are also discussed. The discussion regarding the benefits of RC solutions to foundrymen, and challenges to produce accurate and cost‐effective RC amongst AM manufacturers concludes this paper.
Research limitations/implications
The research related to this survey is limited to the applicability of RC solutions to sand casting and investment casting processes. There is practically no implication in industrial application of RC technology.
Originality/value
This review presents the information regarding potential AM application – RC, which facilitates the fabrication of patterns, cores and moulds directly using the computer‐aided design data. The information available in this paper serves the purpose of researchers and academicians to explore the new options in the field of RC and especially users, manufacturers and service industries to produce casting in relatively much shorter time and at low cost and even to cast complex design components which otherwise was impossible by using traditional casting processes and CNC technology.
Details
Keywords
Ryszard Uklejewski, Mariusz Winiecki, Piotr Rogala and Janusz Mielniczuk
The aim of this paper is to present the main results of a research project finished in 2008 which concerned the selective laser melted (SLM) prototype of a new kind of minimally…
Abstract
Purpose
The aim of this paper is to present the main results of a research project finished in 2008 which concerned the selective laser melted (SLM) prototype of a new kind of minimally invasive resurfacing hip arthroplasty (RHA) endoprosthesis with the original multi‐spiked connecting scaffold (MSC‐Scaffold). Previous attempts performed in pre‐Direct Metal Manufacturing (DMM) era demonstrated that it was impossible to manufacture suitable prototypes of this RHA endoprosthesis (especially of the MSC‐Scaffold) using traditional machining technologies. Owing to an extensive development of DMM technologies observed in recent years the manufacturing of such prototypes has become possible.
Design/methodology/approach
Computer aided design models of pre‐prototypes and the prototype of the RHA endoprosthesis with MSC‐Scaffold were designed and initially optimized within the claims and the general assumptions of international patents by Rogala. Prototyping in SLM technology was subcontracted to SLM Tech Center (Paderborn, Germany). Macroscopic and SEM microscopic evaluation of the MSC‐Scaffold was performed using SLM manufactured prototypes and paying special attention to the quality and precision of manufacturing.
Findings
It was found that SLM can be successfully applied to manufacturing of prototypes of the original minimally invasive RHA endoprosthesis. The manufacturing quality of the 3D spikes system of the MSC‐Scaffold, which mimics the interdigitations of articular subchondral bone, has been proved to be geometrically corresponding to the biological original. Nevertheless, some pores and non‐melted zones were found in SLM prototyped RHA endoprosthesis cross‐sections which need to be eliminated to minimize the potential risk of clinical failure.
Research limitations/implications
The presented case study was performed with a limited number of samples. More research needs to be performed on the rapid prototyped samples including microstructural and mechanical tests. The results may enable the optimization of the SLM manufacturing process of the prototypes of the minimally invasive RHA endoprosthesis with MSC‐Scaffold.
Practical implications
The SLM can be considered as potentially suitable for the fabrication of patient‐fitted minimally invasive RHA endoprostheses with MSC‐Scaffold.
Originality/value
For the first time, largely owing to SLM technology, it was possible to manufacture the prototype of the original minimally invasive RHA endoprosthesis with MSC‐Scaffold suitable for further research.
Details
Keywords
Researchers continue to seek understanding of industrialization as a state managed process. How to create and implement new industries based on advanced knowledge is on the policy…
Abstract
Researchers continue to seek understanding of industrialization as a state managed process. How to create and implement new industries based on advanced knowledge is on the policy agenda of many advanced nations. Measures that promote these developments include national capacity building in science and technology, the formation of technology transfer systems, and the establishment of industrial clusters. What these templates often overlook is an analysis of use. This chapter aims to increase the understanding of the processes that embed new solutions in structures from an industrial network perspective. The chapter describes an empirical study of high-technology industrialization in Taiwan that the researcher conducts to this end. The study shows that the Taiwanese industrial model is oversimplified and omits several important factors in the development of new industries. This study bases its findings on the notions that resource combination occurs in different time and space, the new always builds on existing resource structures, and the users are important as active participants in development processes.
Details
Keywords
Kamaljit Singh Boparai, Rupinder Singh and Harwinder Singh
The purpose of this study is to highlight the direct fabrication of rapid tooling (RT) with desired mechanical, tribological and thermal properties using fused deposition…
Abstract
Purpose
The purpose of this study is to highlight the direct fabrication of rapid tooling (RT) with desired mechanical, tribological and thermal properties using fused deposition modelling (FDM) process. Further, the review paper demonstrated development procedure of alternative feedstock filament of low-cost composite material for FDM to extend the range of RT applications.
Design/methodology/approach
The alternative materials for FDM and their processing requirements for fabrication in filament form as reported by various researchers have been summarized. The literature demonstrates the role of various post-processing techniques on surface finish of FDM prints. Further, low-cost materials for feedstock filament have been investigated experimentally to check their adaptability/suitability for commercial FDM setup. The approach was to realize the requirements of FDM (melt flow rate, flexibility, stiffness, glass transition temperature and mechanical strength), necessary for the successful run of an alternative filament. The effect of constituents (additives, plasticizers, surfactants and fillers) in polymeric matrix on mechanical, tribological and thermal properties has been investigated.
Findings
It is possible to develop composite material feedstock as filament for commercial FDM setup without changing its hardware and software. Surface finish of the parts can further be improved by applying various post-processing techniques. Most of the composite parts have high mechanical strength, hardness, thermal stability, wear resistant and better bond formation than standard material parts.
Research limitations/implications
Future research may be focused on improving the surface quality of parts fabricated with composite feedstock, solving issues related to the uniform distribution of filled materials during the fabrication of feedstock filament which in turns further increases mechanical strength, high dimensional stability of composite filament and transferring the technology from laboratory scale to various industrial applications.
Practical implications
Potential applications of direct fabrication with RT includes rapid manufacturing (RM) of metal-filled parts and ceramic-filled parts (which have complex shape and cannot be rapidly made by any other manufacturing techniques) in the field of biomedical and dentistry.
Originality/value
This new manufacturing methodology is based on the proper selection and processing of various materials and additives to form high-performance, low-cost composite material feedstock filament (which fulfil the necessary requirements of FDM process). Finally, newly developed feedstock filament material has both quantitative and qualitative advantage in RT and RM applications as compared to standard material filament.
Details
Keywords
The objective of this paper is to qualitatively assess environmental issues concerning fly‐ash, generated from thermal power plants of India. The alternate use of fly‐ash as raw…
Abstract
Purpose
The objective of this paper is to qualitatively assess environmental issues concerning fly‐ash, generated from thermal power plants of India. The alternate use of fly‐ash as raw material in the manufacture of pavement bricks and other construction materials is known, but there are few fabrication and assembling units that cater the needs of manufacture of fly‐ash bricks in commercial scale. This paper aims to highlight one such fabrication unit, Naldehra Building Centre (NBC) situated at Faridabad, Haryana, India and the limitations with such entrepreneurship while addressing societal issues of child labour and environmental issues with dispose of fly‐ash.
Design/methodology/approach
This research is largely based on a one‐to‐one meeting the author had with the entrepreneur, Mr Ajay Singh (AS) at his office premises, Faridabad India, in the month of July 2010. The interactions include relevant data collection on the fabrication and assembling business opportunities and global solid waste‐related issues. The discussions were extended with the collection of NBC's machinery brochures, collection of machinery photographs and technical specifications. Further information was collected with selective literature reviews and from the earlier visits to the industrial townships of Jamshedpur, Mosaboni, Panipat and Visakhapatnam, by the author. More visits are made to understand social limitations while engaging child labour in fire‐baked brick kilns.
Findings
The findings include the techno‐marketing skills and leadership attributes of the entrepreneur, AS, Faridabad. Observations made on the intellectual knowledge and business plan executed by AS to support infrastructure‐based business opportunities for parts of the National Capital Region (NCR), India. The in‐house incubation center is an added advantage and found to be an essential component for the successful fabrication and assembling unit. Further, the study applauds role of advisory services rendered for mitigating solid waste through alternate commercial usage by the entrepreneur.
Practical implications
The study has lot of scope and opportunity either to make fabrication units for faster and efficient fly‐ash brick manufacturing or to procure such machinery and get set the unit for the manufacturing fly‐ash bricks in the regions of opportunity and infrastructure development. Hence, practical implications are two‐fold in a physical sense, but can be more in intellectual aspects. This includes development of fabrication designing studios using information and technology, facility planning and operations for the incubation centers, training and to harness skills of the rural youth.
Originality/value
The paper is original, and focused on fabrication entrepreneurship and has relevance to the social environment while mitigating child labour through more automation in brick manufacturing. The environmental value of reusability of solid waste is also unambiguous with this study. The values will further be enhanced when more business enterprises are visited and recorded for their social compliance through adapting to machine‐based brick manufacturing.
Details