Search results

This study aims to examine the relationship between the chemical composition of juices obtained from fruits of autochthonous wild pomegranate (Punica granatum L.) grown in Montenegro and their cytotoxic effects on cancer cells.

To explore the potential value of wild pomegranate fruits, in vitro biological assays were carried out with juices whose composition was analyzed in detail for sugars, organic acids, vitamin C and phenolic compounds. The effect of juices on survival was determined in human lung A549, cervical HeLa and breast MCF-7 carcinoma cells by MTT assay. As a control, the cytotoxicity against normal fetal lung fibroblasts (MRC-5) was monitored.

Among cancer cell lines, considering the IC50 related to total phenolics, the lowest value – 13 µg/mL was found for the A549. The strongest effect on lung cells was assumed due to the favorable contribution of ellagitannins to total phenolics in juice as well as the given combination of anthocyanins and their synergistic action. For HeLa cells, the lowest IC50 value was obtained at 88 µg/mL, and the cytotoxicity could be matched with the effects of anthocyanins and catechin. For MCF-7 cells, the lowest IC50 was 504 µg/mL, and the elevated levels of vitamin C and ellagic acid derivatives should have a noticeable effect on these cells.

This study provides an important contribution to the knowledge on the effect of phytochemicals from wild pomegranate juice on lung, cervical and breast cancer cells, in vitro. The present observations suggest that the juice of wild pomegranate has the potential in the fight against cancer.

This study aims to assess the pitting resistance of austenitic stainless steel welded joints fusion zone (FZ) with high density of inclusions before and after surface treatment, including potentiostatic pulse technique (PPT) and pickling.

The potentiodynamic polarization tests and critical pitting temperature tests were carried out for estimating pitting resistance. The PPT and pickling were performed as surface treatment. Scanning electron microscope (SEM) and energy dispersive spectrometer were used for characterize the microstructure and elemental distribution. Electron back-scattered diffraction (EBSD) was used to assess the portion of phases and morphology of grains.

The weld metal exhibits a higher degree of alloying compared to the base metal, and it contains d-phase and sulfur-containing inclusions. Sulfur-containing inclusions serve as initiation sites for pitting, and they diminish the pitting resistance of weld metal. Both PPT and pickling can remove sulfur-containing inclusions, but PPT causes localized dissolution of the weld metal matrix around the inclusions, while pickling does not. Because of the high density of inclusions, certain pits initiated by PPT are significantly deeper, which makes the formation of stable pitting easier. Because of the high density of inclusions, certain pits initiated by the PPT are deeper. This characteristic facilitates the progression of these initial defects into fully developed, stable pits.

Analysis of pitting initiation in shielded metal arc welding FZ with PPT and ex situ SEM tracking observation. Explanation of why the PPT surface treatment is not able to enhance the pitting resistance of stainless steel with a high inclusion density.

This paper aims to delve into the critical examination of retractions in virology to identify the underlying factor that led to the retraction of scientific publications in this specialised domain. Further, this study offers insights into the impact of the retracted publications in the scholarly world vis-à-vis citation and Altmetric indicators.

The top 100 highly cited retracted articles from virology category were taken from the Web of Science (WoS) database. The Retraction Watch database was used for knowing the reasons for retraction for each retracted publication. The citation and Altmetric score of retracted publications were noted down from WoS and Altmetric.com databases, respectively. Journal Citation Report was used to note down the impact factor of the journals that have published these articles.

“Misconduct” (57.73%) is the most prevalent reason for the retraction of publications followed by plagiarism (18.55%) and journal issues (14.43%). The retracted papers are cited even after their retraction. Around 70.52% citations were received before and 29.47% after retraction. The highest number of retracted papers was published in the Journal of Virology (14) and Journal of Chemistry (10). High-impact factor journals such as Lancet, Cell and Nature each own one retracted paper. The study found dissemination of these publications through social media platforms with highest social media mentions (394) followed by policy and patents mentions (373) and news and blog mentions (300).

The research delves into understanding the reasons behind the retraction of virology papers and the impact of these publications through citation and Altmetric analyses. Its impactions include bolstering quality control in virology research, maintaining trust in scientific literature. Citation and Altmetric analyses offer deep insights into the broader impact of retracted papers, informing policy and publishing practices to uphold scientific integrity in virology.

This study addresses a specific and crucial aspect of scientific research retractions within the field of virology. While retractions have been studied in broader terms in scientific research, to the best of the authors’ knowledge, no such study has been conducted in the scientific field of virology.

This study aims to evaluate the development of composites made of epoxy (E) resin with different weight percentages of polypropylene (PP) and graphene oxide (Go) to form nanocomposite plates.

A hand lay-up process was used to develop 21 different composites, with varying concentrations of PP (5%–35%) and Go (5%–35%). A ternary composite of E matrix was produced by combining binary fillers PP and Go (5%–35%) in a 1:1 ratio to a (95%–5%) solution. With the help of adopting the melt condensation deal to extract Go, the modified Hummers method was used to make Go platelets.

Through field emission scanning electron microscopy (FESEM) and X-ray diffraction investigations, the particulate’s size and structural characteristics were identified. Based on the FESEM analysis of the collapsed zones of the composites, a warp-and-weft-like structure is evident, which endorses the growth yield strength, flexural modulus and impact strength of the composites.

The developed nanocomposites have exceptional mechanical capabilities compared to plain E resin, with E resin exhibiting better tensile strength, modulus and flexural strength when combined with 10% PP and 10% Go. When compared to neat E resin, materials formed from composites have exceptional mechanical properties. When mixed with 10% PP and 10% Go, E resin in particular displays improved tensile strength (23 MPa), tensile modulus (4.15 GPa), flexural strength (75.6 MPa) and other attributes. Engineering implications include automobile side door panels, spacecraft applications, brake pads and flexible battery guards.

This study aims to investigate the influences of Al₂O₃ mass fraction on the corrosive wear and electrochemical behaviors of FeAl–xAl₂O₃ coatings.

FeAl–xAl₂O₃ coatings were prepared on S355 steel by laser cladding to improve its corrosive wear and electrochemical properties.

The average coefficients of friction and wear rates of FeAl–xAl₂O₃ coatings are decreased with the Al₂O₃ mass fraction, and the Al₂O₃ plays a positive role in the corrosion wear resistance. Moreover, the charge transfer resistance of FeAl–xAl₂O₃ coatings is increased with the Al₂O₃ mass fraction, showing the FeAl–15%Al₂O₃ coating has the best corrosion resistance. The findings show the corrosion resistance of FeAl–15%Al₂O₃ coating is the highest among the three kinds of coatings.

Al₂O₃ was first added into FeAl coatings to further improve its corrosive wear and electrochemical properties by laser cladding.

The study suggests that the high concentration of mining and metallurgical enterprises on the territory of the Russian Ural region determines the need to consider industrial waste, including nickel slag, as a possible raw material for the production of ceramic bricks. The article describes the properties of clays and nickel slag obtained at metallurgical enterprises in the Orenburg region and the features of their use as components in the composition of ceramic bricks.

To achieve this purpose, such tasks as determining the technological parameters of production, conducting the X-ray phase and microstructural analysis of the obtained samples were solved.

Compositions of ceramic mass using clay from the Khalilovsky deposit (Orenburg region) with the addition of nickel slag (20 and 40% by weight) have been developed, and their physical and mechanical properties (compressive strength, bending strength, water absorption and density) have been determined. With the help of modern research methods involving high-tech equipment, the microstructure is considered and the phase composition of the finished samples is determined. As a result of the conducted research, it was found that the composition of the selected clay and nickel slag in the obtained rational composition ensures the production of ceramic bricks of grades M175 and M200.

This is the first study on the use of nickel slag for the production of ceramic bricks. The results relate primarily to Russian feedstocks, but a methodology is presented that can be applied to other countries as well as to other silica-containing feedstocks.

This paper aims to explore how graphene can improve the mechanical and anti-corrosion properties of TiO₂-SiO₂ sol-gel coating. This sol-gel coating has been prepared on aluminum alloy substrate using graphene as both nano-filler and corrosion inhibitor.

To examine the effect of graphene on mechanical properties of sol-gel coating, the abrasion resistance, adhesion strength and scratch resistance of coating have been evaluated. To reveal the effect of graphene on the anti-corrosion property of coating for aluminum alloy, the electrochemical impedance spectroscopy (EIS) has been conducted in 3.5 Wt.% NaCl medium.

Scanning electron microscopy images indicate that graphene nanoplatelets (GNPs) have been homogeneously dispersed into the sol-gel coating matrices (at the contents from 0.1 to 0.5 Wt.%). Mechanical tests of coatings indicate that the graphene content of 0.5 Wt.% provides highest values of adhesion strength (1.48 MPa), scratch resistance (850 N) and abrasion strength (812 L./mil.) for the sol-gel coating. The EIS data show that the higher content of GNPs improve both R₁ (coating) and R₂ (coating/Al interface) resistances. In addition to enhancing the coating barrier performance (graphene acts as nanofiller/nano-reinforcer for coating matrix), other mechanism can be at work to account for the role of the graphene inhibitor in improving the anticorrosive performance at the coating/Al interface.

Application of graphene-based sol-gel coating for protection of aluminum and its alloy is very promising.

This paper aims to present spot pattern welding (SPW) as a scanning strategy for laser-foil-printing (LFP) additive manufacturing (AM) in place of the previously used continuous pattern welding (CPW) (line-raster scanning). The SPW strategy involves generating a sequence of overlapping spot welds on the metal foil, allowing the laser to form dense and uniform weld beads. This in turn reduces thermal gradients, promotes material consolidation and helps mitigate process-related risks such as thermal cracking, porosity, keyholing and Marangoni effects.

304L stainless steel (SS) feedstock is used to fabricate test specimens using the LFP system. Imaging techniques are used to examine the melt pool dimensions and layer bonding. In addition, the parts are evaluated for residual stresses, mechanical strength and grain size.

Compared to CPW, SPW provides a more reliable heating/cooling relationship that is less dependent on part geometry. The overlapping spot welds distribute heat more evenly, minimizing the risk of elevated temperatures during the AM process. In addition, the resulting dense and uniform weld beads contribute to lower residual stresses in the printed part.

To the best of the authors’ knowledge, this is the first study to thoroughly investigate SPW as a scanning strategy using the LFP process. In general, SPW presents a promising strategy for securing embedded sensors into LFP parts while minimizing residual stresses.

As a commonly engine coolant, ethylene glycol can produce corrosive acid byproducts at high temperatures when the car is running, specifically oxalic acid (OA), which can shorten the service life of engine. At the same time, chloride ions can also be introduced during coolant preparation processes. Therefore, this paper aims to investigate the synergistic corrosion behavior of Cl⁻ and OA on ADC12 aluminum alloy.

The electrochemical tests, scanning electron microscopy, energy dispersive spectrometer, X-ray diffraction and X-ray photoelectron spectroscopy) were used.

The results showed that the corrosion rate of the aluminum alloy increased with the increase of OA and Cl⁻ concentrations. After adding Cl⁻, the surface film of the aluminum alloy was further damaged, Cl⁻ has a synergistic effect with OA and their interaction further accelerated the corrosion of the aluminum alloy. Nevertheless, as the immersion time increased, the corrosion rate of the aluminum alloy gradually diminished due to the formation of aluminum oxalate.

The corrosion of ADC12 aluminum alloy was studied in OA, Cl⁻ and their mixed solutions; the synergistic effect of OA and Cl⁻ on the corrosion of ADC12 aluminum alloy was discussed, and aluminum oxalate formed inhibited its corrosion.

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Sodium silicate is adopted as a substrate for GO and AgNPs with positive charge are used as modifiers. The synthesized nanocomposite is characterized by FTIR, FESEM, EDS, BET and XRD techniques. Then, some of the most effective parameters on the removal of CR and MB dyes such as solution pH, sorbent dose, adsorption equilibrium time, primary dye concentration and salt effect are optimized using the spectrophotometry technique.

The authors successfully achieved notable maximum adsorption capacities (Qmax) of CR and MB, which were 41.15 and 37.04 mg g⁻¹, respectively. The required equilibrium times for maximum efficiency of the developed sorbent were 10 and 15 min for CR and MB dyes, respectively. Adsorption equilibrium data present a good correlation with Langmuir isotherm, with a correlation coefficient of R2 = 0.9924 for CR and R2 = 0.9904 for MB, and kinetic studies prove that the dye adsorption process follows pseudo second-order models (CR R2 = 0.9986 and MB R2 = 0.9967).

The results showed that the proposed mechanism for the function of the developed sorbent in dye adsorption was based on physical and multilayer adsorption for both dyes onto the active sites of non-homogeneous sorbent.

The as-prepared nano-adsorbent has a high ability to remove both cationic and anionic dyes; moreover, to the high efficiency of the adsorbent, it has been tried to make its synthesis steps as simple as possible using inexpensive and available materials.