Search results
1 – 10 of over 4000Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…
Abstract
Purpose
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.
Design/methodology/approach
Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.
Findings
In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.
Originality/value
With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.
Details
Keywords
Additive manufacturing has been described as converting supply chains into demand chains. By focusing on metal additive manufacturing as a contemporary technology causing ongoing…
Abstract
Purpose
Additive manufacturing has been described as converting supply chains into demand chains. By focusing on metal additive manufacturing as a contemporary technology causing ongoing disruption to the supply chain, the purpose of this paper is to describe and discuss how incumbent firms act during an ongoing, transformational disruption of their supply chain.
Design/methodology/approach
Interviews and secondary data, along with seminars attracting approximately 600 individuals operating in metal additive manufacturing, form the empirical basis for this paper.
Findings
The findings of this paper indicate how disruption occurs at multiple positions in the supply chain. Episodic positions as conceptualised in this paper refer to how parties challenged by disruption attempt to reach normality while speeding the transformational disruption.
Originality/value
This paper contributes to previous research by theorising about episodic positions in light of a supply chain disruption. The empirical data are unique in how they capture supply chain change at the time of disruption and illustrate disruptive, transformational change to supply chains. The paper interlinks research on disruption from the innovation and supply chain literature, with contributions to both.
Details
Keywords
Farui Du, Jinqian Zhu, Xueping Ding, Qi Zhang, Honglin Ma, Jie Yang, Hongzhong Cao, Zemin Ling, Guoyu Wang, Xuanming Duan and Shuqian Fan
A wire-based additive manufacturing system works with high manufacturing efficiency and low dimensional precision. The purpose of this paper is to study the dimensional…
Abstract
Purpose
A wire-based additive manufacturing system works with high manufacturing efficiency and low dimensional precision. The purpose of this paper is to study the dimensional characteristics of Ti-6Al-4V thin-walled parts with wire-based multi-laser additive manufacturing in vacuum.
Design/methodology/approach
Wire-based multi-laser additive manufacturing was carried out to understand the effect brought from different parameters. The Ti-6Al-4V thin-walled parts were formed by different height increments, power inputs and inter-layer cooling times in vacuum.
Findings
The result shows that, with the number of layers increment, the layer width of thin-walled part increases gradually in the beginning and stabilizes soon afterward. Height increment, laser power and inter-layer cooling time could affect the energy input to the deposited bead and heat accumulation of thin-walled part. The layer width decreases, while the height increment increases. The increment of laser power could increase the layer width. And, the increment of inter-layer cooling time (more than 5 s) has little effect on the layer width.
Originality/value
The heat dissipation mode of thin-walled parts in vacuum and the influence of different parameters on layer width are explained in this paper. It provides a reference for further understanding and controlling dimension precision of Ti-6Al-4V thin-walled part with wire-based multi-laser additive manufacturing in vacuum. At the same time, it provides a reference for researches of dimensional characteristics in the additive manufacturing industry.
Details
Keywords
Christina Öberg and Tawfiq Shams
With the overarching idea of disruptive technology and its effects on business, this paper focuses on how companies strategically consider meeting the challenge of a disruptive…
Abstract
Purpose
With the overarching idea of disruptive technology and its effects on business, this paper focuses on how companies strategically consider meeting the challenge of a disruptive technology such as additive manufacturing. The purpose of this paper is to describe and discuss changes in positions and roles related to the implementation of a disruptive technology.
Design/methodology/approach
Additive manufacturing could be expected to have different consequences for parties based on their current supply chain positions. The paper therefore investigates companies’ strategies related to various supply chain positions and does so by departing from a position and role point of view. Three business cases related to metal 3D printing - illustrating sub-suppliers, manufacturers and logistics firms - describe as many strategies. Data for the cases were collected through meetings, interviews, seminars and secondary data focusing on both current business activities related to additive manufacturing and scenarios for the future.
Findings
The companies attempted to defend their current positions, leading to new roles for them. This disconnects the change of roles from that of positions. The changed roles indicate that all parties, regardless of supply chain positions, would move into competing producing roles, thereby indicating how a disruptive technology may disrupt network structures based on companies’ attempts to defend their positions.
Originality/value
The paper contributes to previous research by reporting a disconnect between positions and roles among firms when disruption takes place. The paper further denotes how the investigated firms largely disregarded network consequences at the disruptive stage, caused by the introduction of additive manufacturing. The paper also contributes to research on additive manufacturing by including a business dimension and linking this to positions and roles.
Details
Keywords
Nitish P. Gokhale and Prateek Kala
This study aims to develop and demonstrate a deposition framework for the implementation of a region-based adaptive slicing strategy for the Tungsten Inert Gas (TIG) welding-based…
Abstract
Purpose
This study aims to develop and demonstrate a deposition framework for the implementation of a region-based adaptive slicing strategy for the Tungsten Inert Gas (TIG) welding-based additive manufacturing system. The present study demonstrates a deposition framework for implementing a novel region-based adaptive slicing strategy termed as Fast Interior and Accurate Exterior with Constant Layer Height (FIAECLH).
Design/methodology/approach
The mentioned framework has been developed by performing experiments using the design of experiments and analyzing the experimental data. Analysis results have been used to obtain the mathematical function to integrate customization in the process. The paper, in the end, demonstrates the FIAECLH framework for implementing region-based adaptive slicing strategy on the hardware level.
Findings
The study showcase a new way of implementing the region-based adaptive slicing strategy to arc-based metal additive manufacturing. The study articulating a new strategy for its implementation in all types of wire and arc additive manufacturing processes.
Originality/value
Wire-arc-based technology has the potential to deliver cost-effective solutions for metal additive manufacturing. The research on arc welding-based processes is being carried out in different dimensions. To deposit parts with complex geometry and better dimensional accuracy implementation of a novel region-based adaptive slicing strategy for the arc-based additive manufacturing process is an essential task. The successful implementation of an adaptive slicing strategy would ease the fabrication of complex geometry in less time. This paper accomplishes this need of implementing a region-based adaptive slicing strategy as no experimental investigation has been reported for the TIG-based additive manufacturing process.
Details
Keywords
Danielle Strong, Issariya Sirichakwal, Guha P. Manogharan and Thomas Wakefield
This paper aims to investigate the extent to which traditional manufacturers are equipped and interested in participating in a hybrid manufacturing system which integrates…
Abstract
Purpose
This paper aims to investigate the extent to which traditional manufacturers are equipped and interested in participating in a hybrid manufacturing system which integrates traditional processes such as machining and grinding with additive manufacturing (AM) processes.
Design/methodology/approach
A survey was conducted among traditional metal manufacturers to collect data and evaluate the ability of these manufacturers to provide hybrid – AM post-processing services in addition to their standard product offering (e.g. mass production).
Findings
The original equipment manufacturers (OEMs) surveyed have machine availability and an interest in adopting hybrid manufacturing to additionally offer post-processing services. Low volume parts which would be suitable for hybrid manufacturing are generally more profitable. Access to metal AM, process engineering time, tooling requirements and the need for quality control tools were equally identified as the major challenges for OEM participation in this evolving supply chain.
Practical implications
OEMs can use this research to determine if hybrid manufacturing is a possible fit for their industry using existing machine tools.
Originality/value
Survey data offer an unique insight into the readiness of metal manufacturers who play an integral role in the evolving hybrid supply chain ecosystem required for post-processing of AM metal parts. This study also suggests that establishing metal AM centers around OEMs as a shared resource to produce near-net AM parts would be beneficial.
Details
Keywords
Bo Chen, Zheng Meng, Kai Yang, Yongzhen Yao, Caiwang Tan and Xiaoguo Song
The purpose of this paper is to predict and control the composition during laser additive manufacturing, since composition control is important for parts manufactured by laser…
Abstract
Purpose
The purpose of this paper is to predict and control the composition during laser additive manufacturing, since composition control is important for parts manufactured by laser additive manufacturing. Aluminum and steel functionally graded material (FGM) were manufactured by laser metal deposition, and the composition was analyzed by means of spectral analysis simultaneously.
Design/methodology/approach
The laser metal deposition process was carried out on a 5 mm thick 316L plate. Spectral line intensity ratio and plasma temperature were chosen as two main spectroscopic diagnosis parameters to predict the compositional variation. Single-trace single-layer experiments and single-trace multi-layer experiments were done, respectively, to test the feasibility of the spectral diagnosis method.
Findings
Experiment results showed that with the composition of metal powder changing from steel to aluminum, the spectral intensity ratio of the characteristic spectral line is proportional to the elemental content in the plasma. When the composition of deposition layers changed, the characteristic spectrum line intensity ratio changed obviously. And the linear chemical composition analysis results confirmed the gradient composition variation of the additive manufacturing parts. The results verified the feasibility of composition analysis based on spectral information in the laser additive manufacturing process.
Originality/value
The composition content of aluminum and steel FGM was diagnosed by spectral information during laser metal deposition, and the relationship between spectral intensity and composition was established.
Details
Keywords
Abdul Wahab Hashmi, Harlal Singh Mali and Anoj Meena
The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the…
Abstract
Purpose
The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the products manufactured using AM usually suffer from defects like roughness or uneven surfaces. This paper discusses the various surface quality improvement techniques, including how to reduce surface defects, surface roughness and dimensional accuracy of AM parts.
Design/methodology/approach
There are many different types of popular AM methods. Unfortunately, these AM methods are susceptible to different kinds of surface defects in the product. As a result, pre- and postprocessing efforts and control of various AM process parameters are needed to improve the surface quality and reduce surface roughness.
Findings
In this paper, the various surface quality improvement methods are categorized based on the type of materials, working principles of AM and types of finishing processes. They have been divided into chemical, thermal, mechanical and hybrid-based categories.
Research limitations/implications
The review has evaluated the possibility of various surface finishing methods for enhancing the surface quality of AM parts. It has also discussed the research perspective of these methods for surface finishing of AM parts at micro- to nanolevel surface roughness and better dimensional accuracy.
Originality/value
This paper represents a comprehensive review of surface quality improvement methods for both metals and polymer-based AM parts.
Graphical abstract of surface quality improvement methods
Details
Keywords
Mahyar Khorasani, Ian Gibson, Amir Hossein Ghasemi, Elahe Hadavi and Bernard Rolfe
The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing…
Abstract
Purpose
The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing technique, which can be applied to a very wide range of materials, with particular emphasis on metals. In this paper, the governing principles of both laser-based subtractive of metals (LB-SM) and laser-based powder bed fusion (LB-PBF) of metallic materials are discussed and evaluated in terms of performance and capabilities. Using the principles of both laser-based methods, some new potential hybrid additive manufacturing options are discussed.
Design methodology approach
Production characteristics, such as surface quality, dimensional accuracy, material range, mechanical properties and applications, are reviewed and discussed. The process parameters for both LB-PBF and LB-SM were identified, and different factors that caused defects in both processes are explored. Advantages, disadvantages and limitations are explained and analyzed to shed light on the process selection for both additive and subtractive processes.
Findings
The performance of subtractive and additive processes is highly related to the material properties, such as diffusivity, reflectivity, thermal conductivity as well as laser parameters. LB-PBF has more influential factors affecting the quality of produced parts and is a more complex process. Both LB-SM and LB-PBF are flexible manufacturing methods that can be applied to a wide range of materials; however, they both suffer from low energy efficiency and production rate. These may be useful when producing highly innovative parts detailed, hollow products, such as medical implants.
Originality value
This paper reviews the literature for both LB-PBF and LB-SM; nevertheless, the main contributions of this paper are twofold. To the best of the authors’ knowledge, this paper is one of the first to discuss the effect of the production process (both additive and subtractive) on the quality of the produced components. Also, some options for the hybrid capability of both LB-PBF and LB-SM are suggested to produce complex components with the desired macro- and microscale features.
Details
Keywords
Additive manufacturing, that is, layer-based manufacturing technologies, is thought to change supply chain operations from global to local, while also affecting design processes…
Abstract
Purpose
Additive manufacturing, that is, layer-based manufacturing technologies, is thought to change supply chain operations from global to local, while also affecting design processes and product structures. As this transformation happens, a power struggle among various actors relating themselves to additive manufacturing has emerged. The purpose of this paper is to discuss and explain the development of additive manufacturing from a power dependence point of view.
Design/methodology/approach
The paper is based on data collected from a number of seminars hosting a total of 620 industry experts representing 102 companies in the area, and reflecting every step of the supply chain.
Findings
The paper points out how measures to deal and create power imbalances occur also related to indirect parties, and how the disruptive character of the supply chain leads to exercised power.
Originality/value
The power struggle provides new insights into how an emerging technology is realised and the effect of protectionism on such attempts. Specifically related to additive manufacturing, the paper illustrates the business side from various actors’ point of view, which adds to technological perspectives on additive manufacturing, as well as studies viewing the supply chain from a bird’s-eye perspective.
Details