Search results

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The purpose of this study is to cover the influence of selected printing parameters at a macro and micro-geometrical level, focusing on the dimensions, geometry and surface of printed parts with short carbon fibers reinforced PLA. For this case study, a hollow cylindrical shape is considered, aiming to cover the gap detected in previous works analyzed.

Nowadays, additive manufacturing plays a very important role in the manufacturing industry, as can be seen through its numerous research and applications that can be found. Within the engineering industry, geometrical tolerances are essential for the functionality of the parts and their assembly, but the variability in three-dimensional (3D) printing makes dimensional control a difficult task. Constant development in 3D printing allows, more and more, printed parts with controlled and narrowed geometrical deviations and tolerances. So, it is essential to continue narrowing the studies to achieve the optimal printed parts, optimizing the manufacturing process as well.

Results present the relation between the selected printing parameters and the resulting printed part, showing the main deviations and the eligible values to achieve a better tolerance control. Also, from these results obtained, we present a parametric model that relates the geometrical deviations considered in this study with the printing parameters. It can provide an overview of the piece before printing it and so, adjusting the printing parameters and reducing time and number of printings to achieve a good part.

The main contribution is the study of the geometry selected under a 3D printing process, which is important because it considers parts that are created to fit together and need to comply with the required tolerances. Also, we consider that the parametric model can be a suitable approach to selecting the optimal printing parameters before printing.

Online labour markets (OLMs) have recently become a widespread phenomenon of digital work. While the implications of OLMs on worker well-being are hotly debated, little empirical research examines the impact of such work on individuals. The highly competitive and fast-paced nature of OLMs compels workers to multitask and to perform intense technology-enabled work, which can potentially enhance technostress. This paper examines the antecedents and well-being consequences of technostress arising from work in OLMs.

The authors draw from person–environment fit theory and job characteristics theory and test a research model of the antecedents and consequences of worker technostress in OLMs. Data were gathered from 366 workers in a popular OLM through a large-scale online survey. Structural equation modelling was used to evaluate the research model.

The findings extend existing research by validating the relationships between specific OLM characteristics and strain. Contrary to previous literature, the results indicate a link between technology complexity and work overload in OLMs. Furthermore, in OLMs, feedback is positively associated with work overload and job insecurity, while strain directly influences workers' negative affective well-being and discontinuous intention.

This study contributes to technostress literature by developing and testing a research model relevant to a new form of work conducted through OLMs. The authors expand the current research on technostress by integrating job characteristics as new antecedents to technostress and demonstrating its impact on different types of subjective well-being and discontinuous intention. In addition, while examining the impact of technostressors on outcomes, the authors consider their impact at the individual level (disaggregated approach) to capture the subtlety involved in understanding technostressors' unique relationships with outcomes.

Increasing incidents of privacy invasion on social networking sites (SNS) are intensifying the concerns among stakeholders about the misuse of personal data. However, there seems to be limited research on exploring the impact of specific privacy concerns on users’ intention to engage in various privacy protection behaviors. This study aims to examine the role of social privacy concerns, institutional privacy concerns and privacy self-efficacy as antecedents of privacy protection–related control activities intention among young adults active on SNS.

Data collected from 284 young adults active on SNS was analyzed through partial least squares structural equation modeling using Smart PLS.

The results indicate that institutional privacy concerns, social privacy concerns and privacy self-efficacy positively influence the control activities intention of SNS users. The extent of privacy self-efficacy and privacy protection-related control activities intention differs among users based on gender.

This study is limited to a population of young adults in the age group of 18–25 years.

The findings of this study form the basis for specific recommendations addressing the different types of privacy concerns experienced by social media users, promoting responsible privacy control behaviors on online platforms and discouraging the possible misuse of information by third parties.

This study validates a theoretical framework that can contribute to future investigations concerning the use of SNS. The study findings form the basis for a set of practical recommendations for policymakers, SNS platforms and users.

Prior research has extensively examined how bringing technology from work into the non-work life domain creates conflict, yet the reverse pathway has rarely been studied. The purpose of this study is to bridge this gap and examine how the non-work use of smartphones in the workplace affects work–life conflict.

Drawing from three literature streams: technostress, work–life conflict and role boundary theory, the authors theorise on how limiting employees' ability to integrate the personal life domain into work, by means of technology use policy, contributes to stress and work–life conflict. To test this model, the authors employ a natural experiment in a company that changed its policy from fully restricting to open smartphone access for non-work purposes in the workplace. The insights gained from the experiment were explored further through qualitative interviews.

Work–life conflict declines when a ban on using smartphones for non-work purposes in the workplace is revoked. This study's results show that the relationship between smartphone use in the workplace and work–life conflict is mediated by sensed stress. Additionally, a post-hoc analysis reveals that work performance was unchanged when the smartphone ban was revoked.

First, this study advances the authors' understanding of how smartphone use policies in the workplace spill over to affect non-work life. Second, this work contributes to the technostress literature by revealing how, in specific situations, engagement with ICT can reduce distress and strain.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

Although businesses continue to take up artificial intelligence (AI), concerns remain that companies are not realising the full value of their investments. The study aims to provide insights into how AI creates business value by investigating the mediating role of Business Process Management (BPM) capabilities.

The integrative model of IT Business Value was contextualised, and structural equation modelling was applied to validate the proposed serial multiple mediation model using a sample of 448 organisations based in the EU.

The results validate the proposed serial multiple mediation model according to which AI adoption increases organisational performance through decision-making and business process performance. Process automation, organisational learning and process innovation are significant complementary partial mediators, thereby shedding light on how AI creates business value.

In pursuing a complex nomological framework, multiple perspectives on realising business value from AI investments were incorporated. Several moderators presenting complementary organisational resources (e.g. culture, digital maturity, BPM maturity) could be included to identify behaviour in more complex relationships. The ethical and moral issues surrounding AI and its use could also be examined.

The provided insights can help guide organisations towards the most promising AI activities of process automation with AI-enabled decision-making, organisational learning and process innovation to yield business value.

While previous research assumed a moderated relationship, this study extends the growing literature on AI business value by empirically investigating a comprehensive nomological network that links AI adoption to organisational performance in a BPM setting.

This study aims to analyse the efficiency effects of institutional distance on Chinese outward foreign direct investment (FDI) in Africa.

The study utilised the true fixed-effect stochastic frontier analysis (SFA) model. Data from 2003 to 2016 (14 years) were acquired from 42 targeted African countries, which are included in the analysis.

The results reveal that FDI flow efficiency can be maximised with a high institutional distance between China and African countries. Contrariwise, comparable institutional distance, measured by the rule of law, regulatory quality and government effectiveness between the host and home countries, reflected a significant positive impact for Chinese outward foreign direct investment (OFDIs), indicating Chinese MNEs can invest directly in a country with comparable institutional characteristics.

There have been limited exceptional studies that assessed the effect of institutional distance between emerging countries. However, none of these studies investigated the effect of institutional distance between China and Africa at a national level. Using the advantage of the SFA model, this study assesses the efficiency effects of institutional distance between the host and home country.

This study aims to examine adolescents’ social media environment connected to unhealthy food marketing. As social media have become a ubiquitous part of young people’s everyday lives, marketers have also shifted their focus to these channels. Literature on this phenomenon is still scarce and often takes a quite narrow view of the role of marketing in social media. Furthermore, the experiences of the adolescents are seldom considered.

Using a sociocultural approach and netnographic methodology, this study presents findings from a research project conducted in Finland. The data consist of both social media material and focus group interviews with adolescents.

The findings elaborate on unhealthy food marketing to adolescents in social media from two perspectives: sociocultural representations of unhealthy foods in social media marketing and social media influencers connecting with adolescents.

The study broadens and deepens the current understanding of unhealthy food marketing to adolescents taking place in social media. The study introduces a novel perspective to the topic by looking at it as a sociocultural phenomenon.

Strategic flexibility (SF) has become increasingly important for firms because of the fast changes in the external environment. In line with the practical importance of SF, an emerging research field has developed around it that has attempted to understand the nature of SF and the key relationships. The aim of this study is to unveil the semantic structure of the recent literature on SF and to suggest new promising areas for future research.

The authors conduct a systematic literature review with a bibliographic analysis technique, which allows authors to identify the main recent streams in the literature, as well as offer reflections and suggestions for future research.

The authors uncover three main emerging areas in the research on SF, namely SF as a dynamic capability, the role of knowledge management for SF and the relationship between a firm SF and the external environment. The authors put forward three avenues for future research on SF: Avenue 1. SF, business model innovation (BMI) and other dynamic capabilities (DC), Avenue 2. Digital technologies and SF/organizational agility and Avenue 3. SF and sustainability. Articles included in the special issue entitled “A strategic perspective on flexibility, agility and adaptability in the digital era” contribute to Avenue 2, thus paving the way for filling some of the identified gaps regarding the relationship between SF and digitalization.

To the best of authors’ knowledge, this is the first literature review on SF that uses a bibliometric approach to draw conclusions on the findings in the literature. The review contributes to the theoretical understanding of SF by illustrating and explicating core topics that have persisted over time, as well as by presenting three main avenues for further developing authors’ knowledge around SF.