Search results

This paper aims to develop a new method of protein detection in fabric using purified henna extract targeted to be used as a precautionary step by protein contact dermatitis (PCD) patients.

Henna contains lawsone, which is known for its reaction with amino acid, resulting in the formation of a highly coloured compound. Dye exhaustion test of 2 per cent purified henna extract was done on both protein and non-protein fabric, and the results were analysed using independent samples t-test to assess the significant differences of the comparison. Then, protein fabric indicator was developed by incorporating purified henna extract. It was tested for its dye ability and stability.

Protein fabrics showed a significant higher dye exhaustion (p = 0.001) in which pure silk came in first with 21.70 per cent ± 2.53, silk/rayon, 13.96 per cent ± 0.55, viscose/wool, 9.57 per cent ± 1.36, cotton/spandex, 5.89 per cent ± 0.86, linen/cotton, 5.26 per cent ± 1.29, cotton, 4.87 per cent ± 1.51, polyester/viscose, 4.69 per cent ± 1.09, linen, 4.56 per cent ± 0.86, polyester/cotton, 3.90 per cent ± 0.29 and polyester and 3.88 per cent ± 0.66. Two different forms of protein fabric indicator were developed: capsule and tablet. Both indicators showed good observable dye exhaustion and fixation results. Orange henna dye was fixed on protein fabric while non-protein fabric returned to its original colour after washing procedure. However, the tablet form showed better performance in terms of functionality and stability.

This study will help general community to better understand fibre and its constituents, especially protein where clothing is an integral part of human life because it comes in direct contact with the human skin. As PCD caused by clothing and textile is an uncommon disease, it may also help in creating awareness on how some people may develop contact dermatitis through fabric. This is because the fabric’s protein content is a causative allergen, which most people tend to overlook. For the researcher, this study helps to elucidate some critical areas in PCD for clothing and textile as this topic can be considered an understudy. There is no standard method to detect protein in fabric, especially blended fabric. Thus, a portable kit to detect protein in fabric will be developed in this study. This kit will benefit PCD patients to ease them in finding the right fabric for their skin.

The purpose of this study is to highlight the threats related to the utilization of synthetic fibers. Volatile organic compounds, particulates and acid gases are released during the production of polyester and other synthetic textiles. Polyester is problematic solid waste material as it takes centuries to break down and hence causes microplastic pollution. Biodegradable synthetic solutions for the replacement of polyester are a sustainable business marketing these days. The naNia fiber is the breakthrough product and it is claimed a biodegradable, compostable and toxin-free polymer.

In this research, fabric constructed of naNia fiber was dyed with the extract of naturally occurring Lawsonia inermis (henna) plant leaves. The henna dye was extracted in water and ethanol using different methods, and the better extract was selected by the evaluation of ultraviolet-visible spectroscopy and phytochemical analysis. Henna with ethanol extract showed more desirable results hence it was selected to dye naNia fabric. To improve dyeability, premordanting, simultaneous mordanting and postmordanting were done using chitosan, fresh lemon extract and tannic acid, respectively. The dyed fabric samples were subjected to color strength analysis and multiple colorfastness tests.

The colorfastness test has shown good to excellent results. Scanning electron microscope analysis had also shown the attachment of dye molecules to the filaments. This study revealed that henna dye is appropriate to color naNia fiber even without the aid of a mordant.

For the first time, toxicant-free, biodegradable polyester (naNia) is successfully dyed with sustainable and naturally available dyes and mordants.

Chitosan is widely considered as a natural polymer and a diverse finish to impart antibacterial property and enhanced dye uptake of textiles. Herein, the authors have investigated the feasibility of using chitosan/starch blend as a thickener in screen printing of cellulosic fabrics with some natural dyes.

The polymeric blend of chitosan/starch was prepared and used as a thickener for screen printing with three natural dye extracts, namely, Curcuma tinctoria (turmeric), Beta vulgaris (beet) roots and Lawsonia alba (henna) leaves on cellulosic fabrics like cotton and viscose. The viscosity and rheological properties of print paste as a fresh and after overnight shelving were examined. The influence of polymeric blends on cellulosic fabrics' print properties was inspected by determining their colorfastness, rubbing fastness, tensile strength and antibacterial activity.

The results depicted that chitosan/starch blend as printing thickener increased the shade depth with good wet and dry rubbing fastness for all the test natural dyes. The antibacterial activity of resultant printed cellulosic fabrics was found to be satisfactory against broad-spectrum bacterial strains.

This study's outcome is the development of chitosan blend thickeners to print the cellulosic fabrics with indigenous natural dyes.

The authors found no previous report on the synthesis of chitosan-based antibacterial blend thickeners with three distinct natural dyes and their application in screen printing of native and regenerated cellulosic fabrics of cotton and viscose, respectively.

Henna, a vegetable dye made from ground henna leaves that is used by Moroccan women to create temporary designs for the hands and feet, has become a profitable tourist sector service in the past decade. The social organization and relations of tourist sector henna artisans in the Marrakesh area are closely tied to how the spaces where they work are socially constructed and re-constructed. The artisans’ assertive public behavior directed at strangers is socially disapproved, and highlighted in interactions between the artisans and representatives of the state as well as guides and shopkeepers. Artisans working in public squares organize into multi-function cooperative groups in order to preserve claim to a given space, share supplies and skills, and provide a peer group in and through which reputation is maintained. Alternative spatial arrangements, such as work in herb shops and independent henna shops, correspond with greater conformity to gender norms.

This paper is a review article which presents brief historical information about natural dyes in different historical periods in Egypt. This information will assist archaeologists, dyers, artists and conservators who seek information about ancient dyes in Egypt. For example, the data will help conservators in choosing natural dyes that can be used in producing new models of dyed textile samples that simulate the original historical ones. These models of textile samples can be used as experimental samples in conservation research and training of young conservators. Also, this information can be used by technologists to conduct comparison studies on the technology of natural dyes in ancient Egypt. The dyes are presented according to their alphabetical names in this paper. All data in this paper have been collected from references related to this topic without any changes from the researcher.

The purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric using three mordants.

The colouring agents were extracted from the leaves of Lannea coromandelica using an aqueous extraction method. The extract was characterized using analysis methods of pH, gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared (FTIR), ultraviolet-visible (UV-vis) and cyclic voltammetry measurement. The extract was applied to cotton fabric samples using a non-mordant and three mordants under the two mordanting methods. The dyeing performance of the extracted colouring agent was evaluated using colour fastness properties, colour strength (K/S) and colour space (CIE Lab).

The aqueous dye extract showed reddish-brown colour, and its pH was 5.94. The GC-MS analysis revealed that the dye extract from the leaves of Lannea coromandelica contained active chemical compounds. The UV-vis and FTIR analyses found that groups influenced the reddish-brown colour of the dye extraction. The cyclic voltammetry measurements discovered the electrochemical properties of the dye extraction. The mordanted fabric samples showed better colour fastness properties than the non-mordanted fabric sample. The K/S and CIE Lab results indicate that the cotton fabric samples dyed with mordants showed more significant dye affinities than non-mordanted fabric samples.

Researchers have never discovered that the Lannea coromandelica leaf extract is a natural dye for cotton fabric dyeing. The findings of this study showed that natural dyes extracted from Lannea coromandelica leaf could be an efficient colouring agent for use in cotton fabric.

The purpose of this research is to develop an environmentally friendly antimicrobial dyeing of cotton fabric from the root of Euclea racemosa. Textile phytochemical finishing is in high demand worldwide because of its low toxicity, low pollution, ease of availability, renewability, pharmacological effects and non-carcinogenic properties, as well as its multifunctionality, rapid process stages and potential health benefit.

The cotton fabric was dyed with aqueous extracts of Euclea racemosa root dyes. Dyes were extracted for 20 min at pH 7.43 at room and boiling temperatures with material-to-liquor ratios (MLRs) of 1:5, 1:10, 1:15 and 1:20, altering one variable at a time, and the cotton fabric was colored using a post-mordanting procedure at 50°C with an MLR of 1:20. Using a properly cleaned Petri plate, the colored samples were tested in vitro for antibacterial activity. A spectrophotometer was used to assess color strength and shade depth, as well as wash fastness and annual rubbing fastness tests for both wet and dry.

L* = 36.29, a* = 58.56, b* = 32.46 and K/S = 0.51 were the CIELAB values for dye extracted at boiling temperature. L* = 47.14, a* = 42.23, b* = 49.61 and K/S = 0.38 were the CIELAB values for dye extracted at room temperature. The wash and rubbing fastness of the dyed samples were outstanding and the dyed cotton fabrics were found antibacterial against Gram-negative bacteria Escherichia coli.

Dyes derived from the E. racemosa root could be used to develop a new antibacterial cotton fabric dye.

The purpose of this study is to check the effectivity of plasma in the natural dyeing of polyester fabric using four natural dyes – Turkey red, Lac, Turmeric and Catechu using plasma and alum mordant. The surface modification on the polyester fabric by plasma along with the use of benign mordant alum is studied. The enhancement of dyeability in polyester fabric with natural dyes is the main focus. Due to surface modification, the wettability increases, which leads to better dye uptake. Better dye uptake and better dye adherence are the main objectives.

Plasma-mediated natural dyeing is the main design of this research work. The effect of plasma treatment on surface modification of synthetic fabric polyester and its subsequent effects on their dyeing with different natural dyes, namely, Turkey red, Lac, Turmeric and Catechu are studied. The dyeability was further enhanced by the use of alum as mordant. The main focus is on the betterment of natural dyeing of polyester fabric using sustainable natural dyes resources for dyeing and to reduce wastewater contamination from the usage of toxic additive chemicals for cleaner production.

Plasma-mediated and alum-mordanted dyeing method facilitated very good dyeability of all the four natural dyes, namely, Turkey red, Lac, Turmeric and Catechu. Color strength (K/S) values and fastness properties of plasma-treated samples were far better than untreated samples. The synergistic effect of plasma and alum mordanting has made natural dyeing of polyester very easy with very good fastness results. Natural dyeing of polyester after 2 min of plasma treatment showed excellent and desirable results. The process is also easy to be adapted by industries.

As polyester is hydrophobic, natural dyeing of polyester fabric is not very easy, but with plasma-mediated natural dyeing, it becomes a very facile dyeing method; thus, there are no limitations. Use of plasma has reduced the need for any chemical additives which are usually added during the dyeing process.

This process of natural dyeing of polyester fabric can be scaled up to industrial dyeing with natural dyes. Plasma pretreatment of the fabric followed by premordanting with alum has facilitated the natural dyeing well.

Use of plasma in place of chemical modifiers can be a green and environmentally friendly approach for sustainable coloration of polyester fabric, providing a clean wet processing for textiles dyeing.

The synergistic effect of plasma-mediated and alum-mordanted natural dyeing of polyester has not been attempted by any researcher. To the best of the authors’ knowledge, this is for the first time that pretreatment with atmospheric plasma followed by alum mordanting of polyester fabric has shown very good dye uptake and fastness properties as the dye molecules could penetrate well after 2 min of the plasma treatment.

Natural colorants are believed to be safe because of their nontoxic, noncarcinogenic and biodegradable nature, and also, the demand for natural dyes is steadily increasing. This study aims to investigate the dyeing of polyethylene terephthalate (PET) fabrics under cold plasma and ultraviolet (UV) radiation conditions with Prangos ferulacea.

In the first, some PET fabrics were modified using UV radiation and some others by cold plasma (oxygen/argon), and then the dyeing of fabrics with the natural dye was done (100°C/130°C) without using metallic mordant. Dyeability (color strengths) of the treated samples, colorfastness to washing, light and rubbing, water absorption time, crease recovery angle, air permeability and mechanical behavior were investigated.

The maximum color strength (k/s = 4.87) was achieved for the fabric exposed to UV radiation for 2 h and then dyed with Prangos ferulacea at 130 °C. The results indicated that the dyed fabric showed acceptable colorfastness (very good–excellent) properties in washing and rubbing fastness except for colorfastness to light (moderate). The strength and the angle of crease recovery of treated and dyed samples have increased, while the time of water absorption and air permeability have decreased.

The surface modification of PET (UV radiation and plasma treatment) provides a new idea to improve the dyeability of PET with Prangos ferulacea natural dye without using metallic mordant.

Considered as one of the most unwanted species by the International Union for Conservation of Nature, the Prosopis juliflora plant is a noxious and invasive weed. Recent studies suggest that the heartwood of the plant has an unusually high amounts of flavonoids with potential medicinal properties and dyeing potentials. In this work, acetonic extracts were successfully valorized into a natural dye.

After extraction and optimization of dyeing conditions, the fabric was treated by using pre-mordanting, simultaneously mordanting and post mordanting techniques. The dyed samples were then evaluated by using standard methods ISO 105-C06, ISO 105-A02, ISO 105-X12 for wash, light and rub fastness, respectively.

Dye fastness ranged from good to very good with mordants improving both wash and rub fastness. Optimum pH for dyeing was found to be at 7.2 at temperatures of 60°C and a dyeing time of 80 min. Application of mordant in dyeing white fabric showed improved dyeing properties in post mordanting than both pre-mordanting and simultaneous mordanting.

To best of the authors’ knowledge, this paper details for the first time how a noxious weed can be transformed into a natural dye, with potential applications to the textile industry.