Search results

The purpose of this study is to apply silver nanoparticles on the cellulosic fabric via a green cross-linking approach to obtain antibacterial textiles. The cellulosic fabrics may provide an ideal enclave for microbial growth due to their biodegradable nature and retention of certain nutrients and moisture usually required for microbial colonization. The application of antibacterial finish on the textile surfaces is usually done via synthetic cross-linkers, which, however, may cause toxic effects and halt the biodegradation process.

Herein, we incorporated citrate moieties on the cellulosic fabric as eco-friendly crosslinkers for the durable and effective application of nanosilver finish. The nanosilver finish was then applied on the citrate-treated cellulosic fabric under the pad-dry-cure method and characterized the specimens for physicochemical, textile and antibacterial properties.

The results expressed that the as-prepared silver particles possessed spherical morphology with their average size in the nano range and zeta potential being −40 ± 5 mV. The results of advanced analytical characterization demonstrated the successful application of nanosilver on the cellulosic surface with appropriate dispersibility.

The nanosilver-treated fabric exhibited appropriate textile and comfort and durable broad-spectrum antibacterial activity.

The treated cellulosic fabric expressed that the cross-linking, crystalline behavior, surface chemistry, roughness and amphiphilicity could affect some of its comfort and textile properties yet be in the acceptable range for potential applications in medical textiles and environmental sectors.

The purpose of this paper is to investigate thermal comfort performances of socks produced from cotton and regenerated cellulosic fiber yarns by thermal resistance (by a newly designed foot thermal manikin), moisture management tester (MMT) parameters and permeability (air and water vapor) tests.

Single jersey fabrics and socks were knitted from 30 Ne yarns produced from cotton, different regenerated cellulosic fibers (viscose, modal, bamboo, micromodal, Tencel®, Tencel LF®) and their blends. Thermal resistances of the socks were compared by a newly developed thermal foot manikin in a more realistic way than measurements in fabric form. Besides air and water vapor permeability, moisture management parameters of the fabrics were tested to differentiate performances of cellulosic fibers.

Results show that air permeability, liquid absorption and transfer parameters measured by MMT are generally identical and better for regenerated cellulosic fabrics than cotton. Micromodal and Tencel® have better performances for liquid transfer and overall moisture management capacities are superior for bamboo and Tencel LF®. Thermal resistances of the socks are minimum for Tencel LF® having a cross-linked structure and maximum for viscose socks.

It is thought that thermal resistance measured in socks form is more realistic than fabric measurements and results of this study that can be valid for all knitted garments. Moreover, comprehensive material plan of the study is valuable for getting reliable results for regenerated cellulosic fibers that have small differences in cases of thermal resistance and liquid transfer.

The purpose of this study is to investigate surface treatments and fiber types on adhesion properties polylactic acid (PLA) three-dimensional (3D) parts printed on woven fabrics.

The cotton, flax and jute fabrics were exposed to alkali, hydrogen peroxide, stearic acid and ionic liquid treatments to modify surface characteristics before PLA 3D printing. The modification efficiency was assessed with Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) analyses. Then, fused deposition modeling (FDM) printer and PLA filament were used for 3D printing onto the untreated and treated fabrics. The adhesion strength between the fabrics and PLA 3D parts were tested according to DIN 53530 via universal tensile tester.

The fabric structure is effective on adhesion force and greater values were observed for plain weave fabrics. Maximum separation forces were obtained for alkali pretreated fabrics among jute and cotton. Hydrogen peroxide treatment also increased adhesion forces for jute and cotton fabrics while decreasing for flax fabrics. Stearic acid and ionic liquid treatments reduced adhesion forces compared to untreated fabrics. Treatments are effective to alter adhesion via changing surface chemistry, surface morphology and fabric physical properties but display different effects related to fabric material.

This study provides experimental information about effects of different fiber types and surface treatments on adhesion strength of PLA 3D parts. There is limited research about comprehensive observation on 3D printing on cellulosic-woven fabrics.

Sleep quality, a crucial parameter for health and life performance, is affected by mattress components; particularly mechanical and thermal comfort management ability of the upper layers. The aim of this study is to investigate effects of quilted mattress ticking fabric material (polyester, polypropylene, viscose, lyocell and their blends) on thermal comfort of the bedding system by objective and subjective measurements.

The permeability (air and water vapour), heat transfer, water absorption, transfer and drying behaviours of knitted quilted fabrics which influence the thermal comfort of the bedding system were investigated. Subjective coolness and dampness evaluations were gathered by forearm and hand-palm tests to provide more realistic discussion in light of fabric characteristics.

According to the results, polypropylene can be suggested for winter use with its higher air and water vapour permeabilities, lower thermal absorption and conductivities and warmer evaluation results. Lyocell can be suggested for summer use with also high permeabilities, higher thermal absorption and conductivities and cooler evaluation results. Polyester and viscose may also be considered for winter and summer in turn as a result of thermal feelings they create.

In addition to fabric thermal, permeability, liquid absorption and transfer properties, this study also includes subjective coolness and dampness evaluations which can provide realistic results regarding the coolness-to-touch and liquid transfer performances of mattress ticking fabrics. The relationships among objective and subjective data were investigated and the proposed subjective evaluation techniques can be used for different products.

The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton fabric to improve its properties or to add some functional properties. The paper presented mostly studied research works that brought a significant surface improvement on cotton fabric.

Different previous works on surface modifications of cotton fabrics such as pilling, wrinkle and microbial resistance, hydrophobicity, cationization, flame retardancy and UV-protection characteristics were studied and their methods of modification including the main findings are well reported in this paper.

Several modification treatments on surface modification of cotton fabrics indicated an improvement in the desired properties in which the modification is needed. For instance, the pilling tendency, wrinkling, microbial degradation and UV degradation drawbacks of cotton fabric can be overcome through different modification techniques.

To the best of the author’s knowledge, there are no compressive documents that covered all the portions presented in this review. The author tried to cover the surface modifications done to improve the main properties of cotton fabric.

This paper aims to synthesise a novel crosslinker (crosslinker triethylthiosulphate (TETS)) which contains three Bunte groups in its molecule. The crosslinker is able to react with the hydroxyl groups in cellulosic fibres and the amino group in protein fibres so that it may find applications in many fields.

Crosslinker TETS was synthesised under constant reflux. Capillary electrophoresis analysis and Raman analysis were used to follow the synthetic reaction and characterise the product. The crosslinking between TETS and cellulose could be confirmed by infrared analysis and elemental analysis.

Crosslinker TETS 2,2′,2″‐nitrilo‐TETS was synthesised with a yield of 71.3 per cent. The synthetic reaction follows the mechanism of first, aziridine‐forming and then cyclo‐opening by nucleophiles. A new low‐cost purifying method using ethanol at different temperatures with good yield was proposed.

Practical applications of crosslinker TETS could be studied further.

Crosslinker TETS may find its use in durable‐press finish of cotton fabric, cellulosic fibre modifying to improve dyeing properties and increase fixation of reactive dyes, wet strength improvement of Kraft paper, anti‐fibrillating finish of Lyocell fibre, etc.

A novel polyfunctional crosslinker which belongs to a new Bunte salt was created. The structure, the synthetic reaction, the separation method and the crosslinking reaction of crosslinker TETS have not been reported before.

This study aims to observe the coloring efficacy of coffee-based natural brown colorant for cotton dyeing under microwave (MW) treatment.

The colorant extracted in particular (neutral and acidic) media was stimulated by MW treatment up to 6 min. Dyeing variables were optimized and 2–10 g/100 mL of sustainable anchors (mordants) have been used to get colorfast shades.

It has been found that un-irradiated acidic extract (RE) containing 5% of table salt at 80 °C for 50 min has given high color yield onto MW-irradiated cotton fabric (RC = 2 min). The utilization of 2% of Fe, 10% of tannic acid and 10% of sodium potassium tartrate before bio-coloration, whereas 4% of Fe, 10% of tannic acid and 6% of sodium potassium tartrate after bio-coloration has given good color characteristics. In comparison the application of 6% of pomegranate and turmeric extracts before bio-coloration and 6% of pomegranate and 10% of turmeric extracts after bio-coloration have given good color characteristics. New bio-mordants can be added to get more new colorfast shades.

There is no research limitation for this work. New bio-mordants can be added to get more new colorfast shades.

This work has practical application for artisans, textile industry and handicrafts. It is concluded that colorant from coffee beans can be possible alternative of synthetic brown dyes and inclusion of MW rays for extraction and plant molecules as shade developers can make process more green.

Socially, it has good impact on eco-system and global community because the effluent load is not carcinogenic in nature.

The work is original and contains value-added product for textiles and other allied fields.

This paper reports on the effects of laundering on physical properties (pilling and edge abrasion) of washed denim fabrics.

Garment washed denim blue jeans were subjected to repeated launderings; the effects of the cycles on pilling and edge abrasion were determined. Data were collected by means of a laboratory experimental factorial design. Analysis of variance was used to determine significant differences in the three garment washed treatments; pre‐washed, stone washed and enzyme treated blue jeans. Duncan's test of multiple range determined the source of significance.

The pre‐washed jeans were more prone to pilling than the enzyme and stone washed jeans. On the other hand, the pre‐washed jeans experienced the least amount of edge abrasion while the stone washed experienced the most.

The results can be used by the denim garment manufacturers to design and engineer their products to suit the customer demands.

Jeans are an important part of a consumer's wardrobe and a large portion of denim garments are manufactured with some type of garment wash treatment. Results of this study will provide denim garment manufacturers with pilling and abrasion information regarding garment washing treatments to allow them to utilize the garment treatment that best meets their needs.

The purpose of this paper is to use the natural wastage plant product, bannana pseudostem sap (BPS) for using as fire retardant of cellulosic textile substrate. The study aims to use first time any wastage plant product for making fire retardant cellulosic textile. In this regard flame retardant functionality was imparted in cellulosic textile using BPS, an eco-friendly natural wastage product.

The extracted sap was made alkaline and applied in pre-mordanted bleached and mercerized cotton fabrics. Flame retardant properties of the control and treated fabrics were analyzed in terms of limiting oxygen index (LOI), horizontal and vertical flammability and total heat of combustion using bomb calorimeter. The thermal degradation and pyrolysis was studied using thermogravimetric analysis (TGA). The chemical composition of the control and BPS treated cellulosic fabric were analyzed by FTIR, SEM and EDX. Durability of the flame retardant functionality to soap washing had also been studied.

The study showed that the treated fabrics had good flame retardant property compared to control fabrics. The LOI value was found to increase by 1.6 times after application of BPS. As a result of this, the fabric does not catch flame. In horizontal flammability, the treated fabric showed burning with afterglow (without presence of flame) with a propagation rate of 7.5 mm/min, which is almost ten times lower than the control fabric. After application of BPS cellulosic fabric sample produced natural khaki colour. There was no significant change in other physical properties.

The application process is simple and cost-effective as no costly chemicals were used. Further advantage is that the treated fabric could also be considered as natural dyed cotton fabric. The developed khaki colour is quite attractive and stable to sun light exposure. This developed process could used in colouration and flame retardant finishing of home furnishing products such as home-window curtain, railway curtain, hospital curtain, table lamp and as a covering material of non-permanent structure like in book fair, festival, religious purpose, etc., where large quantity of textile is used and has chance of fire hazards.

BPS abundantly available in Indian as well as other countries and it is normally considered as waste material. It is eco-friendly and produced from renewable source. Therefore, the application of BPS in cotton textile for colouration and functionalization will give the advantages of value addition using natural product. Rural people will be benifited lot by applying this technology whenever it required.

This paper helps to clarify first time why and how a wastage plant product like BPS can be used for preparing fire retardant cotton cellulosic fabric.

Chitosan is widely considered as a natural polymer and a diverse finish to impart antibacterial property and enhanced dye uptake of textiles. Herein, the authors have investigated the feasibility of using chitosan/starch blend as a thickener in screen printing of cellulosic fabrics with some natural dyes.

The polymeric blend of chitosan/starch was prepared and used as a thickener for screen printing with three natural dye extracts, namely, Curcuma tinctoria (turmeric), Beta vulgaris (beet) roots and Lawsonia alba (henna) leaves on cellulosic fabrics like cotton and viscose. The viscosity and rheological properties of print paste as a fresh and after overnight shelving were examined. The influence of polymeric blends on cellulosic fabrics' print properties was inspected by determining their colorfastness, rubbing fastness, tensile strength and antibacterial activity.

The results depicted that chitosan/starch blend as printing thickener increased the shade depth with good wet and dry rubbing fastness for all the test natural dyes. The antibacterial activity of resultant printed cellulosic fabrics was found to be satisfactory against broad-spectrum bacterial strains.

This study's outcome is the development of chitosan blend thickeners to print the cellulosic fabrics with indigenous natural dyes.

The authors found no previous report on the synthesis of chitosan-based antibacterial blend thickeners with three distinct natural dyes and their application in screen printing of native and regenerated cellulosic fabrics of cotton and viscose, respectively.