Search results

This paper aims to examine the recipe for and standard methods of dyeing cotton fabric with natural dyes from jackfruit wood extract. The dyeing of the fabric was performed by immersion it without heating for a short time to obtain the best results.

The dyeing experiment using cotton fabric with jackfruit wood extract was conducted by immersion at room temperature. The independent variables studied were the mordant method, type of mordant, mordant concentration, salt concentration and dyeing pH. The dependent variables were colour strength and colour fastness to washing and rubbing. The orthogonal array L16 (45) was used in the study to obtain the optimal values for each parameter of the response variables. The multi-response signal-to-noise (MRSN) method was used to optimise the five response variables with different quality characteristics so that the best parameters could be obtained based on the highest MRSN ratio value.

The best parameters were obtained at an MRSN value of 4.5254 under A3B3C1D2E4 conditions, namely, the dyeing process with post mordant, aluminium nitrate type mordant, mordant concentration of 10 g/L, salt concentration of 15 g/L and dyeing a pH: of 10. Under these conditions, the value of K/S was obtained at 1.893, colour fastness to washing (GS: 4) and (SS: 4–5), dry rubbing (SS: 5) and wet rubbing (SS: 4–5).

Obtaining a standard recipe and method for dyeing cotton cloth with jackfruit wood extract by immersion without heating is expected to lead to the development of natural dyes, and especially their application on an industrial scale. This standard and method can be used as technical guidelines by industry. The use of aluminum nitrate as a mordant will help achieve optimal dyeing results. The use of polyaluminium chloride (PAC) mordant, which has the potential to produce high colour strength, and papaya fruit sap, which has the capacity to increase colour fastness, still need to be developed to improve the results of natural dyes.

The standard recipe and dyeing method will be able to improve the results of the dyeing of cotton fabrics with natural dyes. Short immersion dyeing without heating and the optimal results obtained are the main attractions for their use by the textile/batik industry, as the process is easier and a lower cost. The results of dyeing with dark colours and good colour fastness mean the textile products are of the higher quality demanded by consumers, thereby increasing sales. This will encourage the use of and increase the need for natural dyes by industry, consequently reducing the use of synthetic dyes.

The use of natural dyes, chemical mordant from aluminum salts, and natural mordant from papaya fruit sap in the dyeing process in the textile/batik industry in Indonesia will produce eco-textile and eco-batik products that are environmentally friendly and of high quality. This in turn will increase consumer interest and sales, meaning that the income and economy of workers in the textile industry/crafts sector will also increase. In addition, the use of natural dyes with the selection of a safe mordant (not containing heavy metals) will reduce the use of synthetic dyes, which pollute and damage the aquatic environment.

This study found a standard recipe and method of dyeing cotton fabric with natural dyes from jackfruit wood extracted by immersion without heating for a short time to obtain the best results. In addition, the discovery was of PAC, a new mordant which is effective in the use of natural dyes can give high colour strength to cotton fabric. In addition to the discovery of a new mordant, PAC, which has the potential to produce high colour strength, papaya fruit sap also has the capacity to increase colour fastness with the use of natural dyes from the flavonoid group.

The majority of the synthetic dyes have been found to be non-biodegradable, toxic and carcinogenic. As a result, there has been a growing trend toward the use of natural dyes as alternates to synthetic dyes. This shift calls for more research to come up with more sources of natural dyes to satisfy their increasing demand. Euclea divinorum plant has been used traditionally as a source of dye, however, its textile dyeing properties have not been studied. This study aims to determine the textile dyeing properties of E. divinorum extract.

Optimization of dyeing conditions of Euclea divinorum natural dye extract on the cotton fabric was done using response surface methodology (RSM). The combined effects of examined dyeing conditions on the relative color strength (K/S) were studied using a central composite experimental design. Analysis of variance (ANOVA) was used to determine the significance of the statistical model generated for the study. Mordanting effects were measured using standard ISO wash, rub and lightfastness tests.

The optimum dyeing conditions were found to be 68 min, pH 3.3 and 82°C with color strength 0.609. Temperature and pH showed some interaction effects during the dyeing experiments. The predicted optimum K/S value was validated experimentally using the optimum conditions and was found to be in agreement with the experimental values. All the metallic mordants used enhanced the color strength and provided a variety of brown shades, therefore, a suitable alternative for the toxic synthetic dyes.

Optimization of dyeing conditions of Euclea divinorum dye on cotton using RSM and mordanting at optimal conditions has not been done elsewhere.

The purpose of this study is simultaneous dyeing and mordanting of wool yarns with extracted cochineal dye and aluminum sulfate to the reduction of consuming energy, water and time.

The dyeing process was optimized using the response surface methodology (RSM) approach. pH, dyeing duration and the presence of additives were chosen as variables and the color strength of samples as a response. The color characteristics and fastness attributes of samples dyed in the best condition were evaluated and compared to pre-mordant dyeing outcomes on wool yarns.

The best conditions for deep dyeing wool with cochineal dye were as follows: pH 2.5, time 110 min and the ratio of aluminum: additives 1:0 at 100 °C. Color strength of dyed wool yarns by one-bath and pre-mordant dyeing methods were approximately the same. Wool yarns can dye to the on-bath dyeing method such that the dyed samples have similar color strength and fastness properties to pre-mordant dyeing.

Wool dyeing processes that use one-bath dyeing consume less water and produce fewer effluents. As a result, this strategy conserves water and energy for a higher quality of life. The findings of this study, in general, aid environmental protection.

A novel one-bath process for dyeing wool with cochineal dye at heavy depths is introduced. RSM was used to optimize the procedure and determine effective parameters on the color strength of dyed wools. Using extracted cochineal dye and aluminum sulfate in a simultaneous dyeing technique, good color fastness qualities on wool fibers were achieved.

Describes how 48 subjects participated in experiments to investigate the effect of visual cues in identifying odours. The subjects were first instructed to describe the odour of six fruit solutions, four of which were inappropriately coloured. Second, they were presented with a series of fruit solutions which varied in odour and colour intensity and were asked to rank them in order of odour strength. For the control sets, the odour and colour strengths were compatible; in the experimental sets the odour strength and colour intensity were conflicting. The results of the first experiment indicate that the identification of fruit odours proves significantly more difficult when the colour of the solution is inappropriate (p < 0.05) and in the second experiment more subjects rank the solutions in the correct order when the colour intensity and odour strengths are compatible than when they are conflicting. Visual cues are found to influence odour judgements significantly and, when presented with conflicting stimuli, the visual cues appear to override the olfactory sense and distract the subjects from making the correct assessment.

Commercial natural dyes are quite costly as manufacturers are to follow multi-step extraction and purification procedures for standardisation purposes. Upon cost comparison, they lose in the market to synthetic dyes. However, in the handicraft sector, reproducibility may be of lesser importance against cost. In the present study, a domestic method of dyeing silk with the aqueous extract of raw plant/tree components (flower, leave, bark and root) by using a natural mordant and alum will be described. Good dyebath exhaustion and washing and light fastness are observed for some of the natural colouring matters.

The purpose of the paper is to study the effect of color stability on introducing chenodeoxycholic acid (CDCA) into a colored liquid extract from saffron and determine the color quality of the extract over a nine-month period.

Six colored liquid samples with different CDCA contents ranging from 0 to 45 Wt.% have been successfully prepared. Chromaticity (C*), color saturation (s), UV-Vis spectroscopy and coloring strength studies have been assessed to determine how CDCA influences the color properties and to study the color quality over time. The color quality was analyzed using the Commission Internationale de l’Eclairage (CIE) system.

All results obtained revealed that the addition of CDCA significantly influenced the overall color performance of the saffron extraction. However, the most pronounced improvement was recorded with the use of 45 Wt.% CDCA. The sample exhibited the highest color quality at the end of nine months of storage with highest absorbance: C* value = 91.38, color saturation = 0.96 and coloring strength = 687.

This preliminary study offers significant findings for further research focused on stability of natural colorants extracted from Spanish saffron that can provide benefits for future applications especially in coating industry, food, agriculture, medicine and others.

The values of this work can be observed from the information and evidence provided by CIE color stability in terms of chromaticity and saturation, as well as UV-Vis spectrophotometric measurement. It showed that the addition of CDCA additive can help to prolong and enhance the natural colorant properties from Spanish saffron (Crocus sativus L.) for nine month of storage. This proved that by adding additives such as CDCA the saffron colorant can be maintained. To the best of the authors’ concern, this is the first time CDCA is used to prevent color degradation of natural colorant from saffron.

The textile industry has consumed large quantities of water and discharged large volumes of wastewater in the dyeing process. The study aims to characterize self-dyed silk with Rhodamine B (RhB) for fashion applications to reduce textile hazards to the environment and increase the added value of silk.

Bombyx mori was fed with RhB-colored mulberry leaves (1500 ppm). The effects of self-dyeing were investigated via color strength K/S, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscope, X-ray diffraction, tensile strength, color fastness to washing, rubbing, perspiration and light.

Self-dyed silk possesses effective coloration and impressive color fastness (4–5/5), higher crystalline index (CrI) (73.26 ± 2.28%), less thermal stability and tenacity, slight change in amino acid composition compared with the pristine and no existence of harmful aromatic azo amines and arylamine salts.

The application of self-dyed silk with RhB dye has expanded new technology into fashion industry, contributing partly to economic growth and adding value to silk in the global supply chain. Besides, the self-dyeing will yield practical values in the reduction of dyeing discharge in textile industry.

Self-dyed silk was characterized for textile applications in comparison with pristine silk in terms of color strength and fastness as well as determined its polymeric properties relating to crystallinity, morphology, chemical composition, tensile properties and thermal stability which have not been investigated before.

The purpose of this paper is to investigate and discuss the influence of printing parameters on the mechanical properties of acrylonitrile butadiene styrene (ABS) print by fused deposition modelling (FDM). The mechanical properties of ABS are highly influenced by printing parameters, and they determine the final product quality of printed pieces.

For the paper’s purpose, five main parameters (extrusion temperature, infill pattern, air gap, printing speed and layer thickness) were selected and varied during ABS printing on an open-source and self-replicable FDM printer. Three different colors of commercially available ABS were also used to investigate color and printing parameter’s influence on the tensile strength.

The research results suggest that two parameters (infill pattern and layer thickness) were most influential on the mechanical properties of print ABS, being able to enhance its tensile strength. Another key influential factor was material color selected prior to printing, which influenced the tensile strength of the print specimen.

This study provides information on print parameters’ influence on the tensile strength of ABS print on replicable open-source three-dimensional (3D) printers. It also suggests the influence of materials’ color on print pieces’ tensile strength, indicating a new parameter for materials selection for 3D printing.

The health and environmental hazards associated with synthetic dyes have led to a revival of natural dyes that are non-toxic, environmentally benign and coupled with various functions. The study aims to investigate and develop the potentiality of a popular herb called Chromolaena odorata (C. odorata) as a sustainable and stable dyestuff in textiles.

Natural colorant extracted from C. odorata leaves is used to dye the worsted fabric, which is one of the premier end-use of wool in fashion, via the padding method associated with pre-, simultaneous and post-mordanting with chitosan, tannic acid and copper sulfate pentahydrate. The effects of extraction, dyeing and mordanting processes on fabric’s color strength K/S and color difference ΔE_CMC are investigated via International Commission on Illumination’s L*a*b* color space, Fourier transform infrared spectroscopy, scanning electron microscope, color fastness to washing, rubbing, perspiration and light.

The results obtained indicate extraction with ethanol 90% with a solid/liquid ratio of 1:5 within 1 h, and coloration with a liquor ratio of 1:5 (pH 5) within 2 h under padding pressure of 0.3 MPa are the most effective for coloring worsted fabric.

The C. odorata’s application as a highly effective dyestuff possessing good colorimetric effectiveness has expanded this herb's economic potential, contributing partly to economic growth and adding value to wool in global supply chain.

C. odorata dyestuff has prevailed over other natural colorants because of its impressive color fastness against washing, rubbing, perspiration and especially color stability for pH change.

The present study aims to focus on the feasibility of using an aqueous extract from the fruit shell of Camellia oleifera Abel as a source of natural colourant in printing-paste preparation for pigment printing of cotton fabric. The effects of pre- and post-mordanting with three common metallic mordants, that is AlK(SO₄)₂, CuSO₄ and FeSO₄ on colour yield and colour fastness properties are also investigated.

The printing paste was prepared by mixing the concentrated Camellia oleifera Abel fruit shell extract solution with commercially available synthetic thickener and binder. The fabric sample was printed with the prepared printing paste using a flat-screen printing technique. To determine the effects of pre- and post-mordanting, AlK(SO₄)₂, CuSO₄ and FeSO₄ mordant aqueous solutions with various concentrations were applied using the pad-dry technique. Comparisons between printing with and without mordants were evaluated in terms of colour strength (K/S values) and colour fastness to washing, light, crocking and perspiration.

Without the mordants, the printed fabric had a yellowish brown shade with acceptable colour fastness properties, that is fair to good wash fastness, moderate light fastness, good to very good crocking fastness and fair to good perspiration fastness. The use of mordants, especially CuSO₄ and FeSO₄, not only enhanced colour strength but also imparted different colours to the fabric. Compared to the unmordanted fabrics, colour fastness properties were mostly comparable or improved in the mordanted fabrics depending on the type and concentration of mordants.

Although in the case of CuSO₄ the light fastness was increased to a good to very good level, it is recommended that the final print be produced with a concentration of less than 0.125 gL⁻¹ to yield the print with the residual amount of Cu metal under the limit, that is less than 50 ppm as regulated by the Oeko-Tex^® standard.

The obtained prints from Camellia oleifera Abel fruit shell extract provided shades with satisfactory colour fastness to washing, light, crocking and perspiration. The extract from Camellia oleifera Abel fruit shell has the potential to be used as an alternative to synthetic dye in the textile industry.

The use of Camellia oleifera Abel fruit shells, which are considered as abundant byproducts of tea seed oil production, as natural colouring agents for pigment printing of cotton fabric has been reported for the first time. It will minimise the environmental impact of this waste and create more valuable textile products.