Search results

This paper aims to establish the acid concentration of finely dispersed droplets in hydrocarbon oils. Small quantities of aqueous sulphuric acid (H₂SO₄) were found to be trapped within hydrocarbon shells, making them inaccessible for concentration evaluation by titration.

Fourier transform infrared spectroscopy (FTIR) used in the attenuated total reflection mode (ATR; FTIR-ATR) was applied to study the reaction products of squalane, C₃₀H₆₂, and an API Group I base oil with various concentrations of aqueous H₂SO₄.

The absorbance comparison usually used for estimating acid concentrations was found to fail when small quantities of acid are trapped in the reaction product. It was found that the peak shift and changes in absorbance found for various pure aqueous acid concentrations were useful to establish the remaining concentration of the trapped H₂SO₄.

This paper fulfils the identified need to study acid dissociation-dependent peak shifts of H₂SO₄ to find the acid concentration of finely dispersed droplets in hydrocarbon oils.

Plasma polymerization is a very promising technique to produce functional textile materials for any textile end uses as well as for high performance clothing. It can be possible to obtain highly cross‐linked, pinhole free and very thin polymer films up to 1 μm thickness with unique physical and chemical properties. These films can be used as very effective barriers. The purpose of this paper is to investigate the influences of plasma polymerization of hexamethyldisilane (HMDS) and hexamethyldisiloxane (HMDSO) on the surface properties of cotton and polyamide fabrics.

The methodology is based on the surface modification of the cotton and polyamide fabrics by plasma polymerization of HMDS and HMDSO. The fabrics are modified by low pressure low temperature RF (radio frequency −13.56 MHz) plasma polymerization system under different power and time conditions. The changes in surface structure and morphology of the fabrics are investigated by Fourier transform infrared spectroscopy‐attenuated total reflectance (FTIR‐ATR) analysis and atomic force microscopy (AFM).

Water repellency of polyamide fabrics is strongly enhanced after plasma polymerization of both HMDS and HMDSO monomers. In addition to this, the treatments are found to slow down the vertical flame spread in cotton fabrics.

Increased water repellency and decreased vertical flame spread are achieved using plasma polymerization technique in a very short time with very little amount of chemical and without water and auxiliary agent.

The purpose of this paper is to create a textile material which shows antibacterial activity with resistance to environmental conditions by using volatile active agent inclusion complex and self-assembly method.

An inclusion complex of carvacrol and β-CD is generated by kneading method and deposited on the cotton fabrics by using a nanofabrication method named as layer-by-layer (LbL) deposition method. Three different concentration of CD and CD:Car aqueous solutions were deposited on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy (FTIR-ATR), scanning electron microscopy (SEM), antimicrobial efficacy test of fabrics against washing and some physical tests (water vapor permeability, air permeability) were performed on the fabrics before and after the treatment with CD to evaluate the effect of the LbL process on cotton fabric properties.

The results showed that the coated fabrics with CD/CD:Car multilayer films enhanced the antimicrobial efficacy of cotton fabrics against to Klebsiella pneumonia and Staphylococus aureus bacteria. Air and water vapor permeability properties of the cotton fabric effected after the LbL deposition process sure enough. With SEM and FTIR-ATR analysis the CD:Car complex presence were verified. The durability of antibacterial properties were analyzed after one and ten washing (40°C and 30 min) cycles.

This work provides a novel and simple method for CD and inclusion complex of carvacrol film deposition by self-assembly method on cotton fabrics and their application onto cotton fabrics to gain antibacterial property.

This paper aims to extracted sericin from the cocoons of Bombyx mori silkworms, and sericin powder was applied onto drawn textured polyethylene terephthalate (PET) yarns as a spin finish. The reactivity on the surface of PET yarns was analyzed through Fourier transform infrared spectrophotometry–attenuated total reflectance (FTIR-ATR) and dyeing with methylene blue as a reactive dye. Also, investigations were conducted on the effects of sericin, citrc acid (CA) (as a crosslinking agent), and sodium hypophosphite (as a catalyst) concentrations on some properties of false-twist textured PET yarns.

A false-twist texturing machine (Scragg-Shirley minibulk, England) was used with the draw ratio of 1.05, heating temperature of 120°C, texturing speed of 100 m min⁻¹ and applied twist of 3,000 TPM. The aqueous extraction of sericin was carried out by the boiling of the raw silk in distilled water with L:R: 40:1 for 120 min. The aqueous solution was filtered with a filter paper to remove the impurities and insoluble fibroin. Finally, the sericin solution was freeze-dried to obtain the sericin powder. The sericin solution was applied on the drawn textured PET yarns using the “pad-dry-cure” method.

Sericin fixation onto the PET yarns was confirmed by FTIR-ATR. The results showed that there were no significant changes in the tensile strength, linear density, crimp contraction and crimp modulus, elongation at break and shrinkage. In contrast, a substantial increase was observed in moisture regain, vertical wicking, dye uptake and ultraviolet protection. There was also a reduction just in the electrical resistivity, in the presence of sericin.

Although sericin has been known to have numerous beneficial properties, its application in textile industry as a spin finish has not been reported yet.

Wool fabrics were treated with plasma under the influence of different plasma gases were assessed by Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS) and Fourier Transform Infrared Spectroscopy with Attenuated Total Internal Reflectance mode analysis (FTIR-ATR). Experimental results showed clearly that the surface feature and chemical compositions of LTP treated wool were varied much dependable on the nature of plasma gas used and the variations were finally discussed.

The development of new advanced materials, such as photopolymerizable resins for use in stereolithography (SLA) and Ti6Al4V manufacture via selective laser melting (SLM) processes, have gained significant attention in recent years. Their accuracy, multi-material capability and application in novel fields, such as implantology, biomedical, aviation and energy industries, underscore the growing importance of these materials. The purpose of this study is oriented toward the application of new advanced materials in stent manufacturing realized by 3D printing technologies.

The methodology for designing personalized medical devices, implies computed tomography (CT) or magnetic resonance (MR) techniques. By realizing segmentation, reverse engineering and deriving a 3D model of a blood vessel, a subsequent stent design is achieved. The tessellation process and 3D printing methods can then be used to produce these parts. In this context, the SLA technology, in close correlation with the new types of developed resins, has brought significant evolution, as demonstrated through the analyses that are realized in the research presented in this study. This study undertakes a comprehensive approach, establishing experimentally the characteristics of two new types of photopolymerizable resins (both undoped and doped with micro-ceramic powders), remarking their great accuracy for 3D modeling in die-casting techniques, especially in the production process of customized stents.

A series of analyses were conducted, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, mapping and roughness tests. Additionally, the structural integrity and molecular bonding of these resins were assessed by Fourier-transform infrared spectroscopy–attenuated total reflectance analysis. The research also explored the possibilities of using metallic alloys for producing the stents, comparing the direct manufacturing methods of stents’ struts by SLM technology using Ti6Al4V with stent models made from photopolymerizable resins using SLA. Furthermore, computer-aided engineering (CAE) simulations for two different stent struts were carried out, providing insights into the potential of using these materials and methods for realizing the production of stents.

This study covers advancements in materials and additive manufacturing methods but also approaches the use of CAE analysis, introducing in this way novel elements to the domain of customized stent manufacturing. The emerging applications of these resins, along with metallic alloys and 3D printing technologies, have brought significant contributions to the biomedical domain, as emphasized in this study. This study concludes by highlighting the current challenges and future research directions in the use of photopolymerizable resins and biocompatible metallic alloys, while also emphasizing the integration of artificial intelligence in the design process of customized stents by taking into consideration the 3D printing technologies that are used for producing these stents.

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by inadequate scientific data, further aggravated by the lack of evidence in many African countries. This review therefore synthesized evidence on the current extent of MP pollution in Africa and the analytical techniques for reporting.

A literature search was undertaken in research databases. Medical subject headings (MeSH) terms and keywords were used in the literature search. The authors found 38 studies from 10 countries that met the inclusion criteria.

Marine organisms had MPs prevalence ranging from 19% to 100%, whereas sediments and water samples had between 77 and 100%. The most common and dominant polymers included polypropylene and polyethylene.

This review shows that most studies still use methods that are prone to human errors. Therefore, the concentration of MPs is likely underestimated, even though the authors’ prevalence evaluations show MPs are still largely pervasive across multiple environmental matrices. Also, the study reveals significant spatial disparity in MP research across the African continent, showing the need for further research in other African countries.

Even though some reviews have assessed MPs pollution in Africa, they have not evaluated sample prevalence, which is necessary to understand not only concentration but pervasiveness across the continent. Secondly, this study delves deeper into various methods of sampling, extraction and analysis of MPs, as well as limitations and relevant recommendations.

Different types of wood (ash, oak and beech) have been activated by new activation method. The aim of this work is to study the effect of different types of wood on the physical and chemical properties of Ni/Pd coatings.

The wood was activated by ablation of the Pd target using pulsed laser deposition (PLD) technique. Different diagnostic techniques such as X-ray photoelectron spectroscopy (XPS), attenuated total reflection (ATR) spectroscopy and energy dispersed X-ray spectroscopy (EDS), in parallel with scanning electron microscopy (SEM) were used to achieve this goal.

The XPS technique confirmed that the highest concentration of Pd was found in the Pd/beech sample, which is associated to the texture of the beech wood substrate surface. EDS results confirmed the absence of any contamination related to electroless plating method. It is concluded that the wood morphology and its surface roughness play a conclusive role to obtain different quantity of metal by PLD and electroless plating methods.

Although several works have been performed to study the influence of substrates on the coated metals and away of the traditional methods in activating non-catalytic surface, in this paper, PLD method is used to obtain a good quantity of Pd distributed on the entire surface and inside the porous of the wood. This study could be considered as a step investigation for understanding the role of the wood substrate morphology on the physical and chemical properties of films. To our knowledge, there are no works of combining a coated Ni/Pd by electroless plating and PLD methods on wood.

This study aims to describe the design and synthesis of two novel azo and imine chromophores-based dyes derived from two different aldehydes with intramolecular colour matching that are pH sensitive.

The visible absorption wavelength (λ_max) was extended when azo chromophore was included in imine-based systems. The dyed patterns created sophisticated colour-changing paper packaging sensors with pH-sensitive chromophores using alum as a mediator or mordant. Due to the tight adhesive bonding, the dyes on paper’s cellulose fibres could not be removed by ordinary water even at extremely high or low pH, which was confirmed by scanning electron microscopy analysis. The dyed patterns demonstrated an evident, sensitive and fast colour-changing mechanism with varying pH, from pale yellow to red for Dye-I and from pale yellow to brown-violet for Dye-II.

The λ_max for colour changing was recorded from 400 to 490 nm for Dye-I, whereas from 400 to 520 for Dye-II. The freshness judgement of food was checked using actual experiments with cooked crab spoilage, where the cooked crab was incubated at 37 ^oC for 6 h to see the noticeable colour change from yellow to brown-violet with Dye-II. The colour-changing mechanism was studied with Fourier transform infrared (FTIR) spectra at different pH, and thin layer chromatography, nuclear magnetic resonance and FTIR spectroscopy studied the desired structure formation of the dyes. Potential uses for smart packaging sensors include quickly detecting food freshness during transportation or right before consumption.

1. Two novel azo-imine dyes have been synthesized with a pH-responsive effect. 2. The pH-responsive mechanism was studied. 3. The study was supported by computational chemistry using density functional theory. 4. The obtained dyes were used to make pH-responsive sensors for seafood packaging to judge the freshness.

The purpose of this paper is to develop the flame retardancy properties of cotton fabrics with treatment of phosphorus and nitrogen containing silane-based nanosol by sol-gel process.

Nanosols containing tetraethoxysilane or (3-aminopropyl) triethoxysilane as precursors, (3-glycidyloxypropyl) trimethoxysilane as cross-linking agent and guanidine phosphate monobasic as flame retarding agent were impregnated on cotton fabrics. Flame retardancy properties of the fabric samples were determined by limited flame spread test and limited oxygen index (LOI) test. In addition, microstructural and surface morphological properties of the fabric samples were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscope.

Depending on the limited flame spread test, the authors show that the coated fabric samples gain flame retardancy properties and the LOI value of the samples increased as to 45.7 per cent by the synergistic effect of phosphorus-nitrogen-silicon.

There have some studies in flame retardancy behaviour of textiles. In this study, flame retardant cotton fabric with very low weight in grams was improved by sol-gel process. Moreover, ecological process was provided thanks to using halogen-free flame retardant.