Search results

Applies Fourier transform infrared spectroscopy (FTIR) to the study of lac resin, a complex natural resin of insect origin, and some of its derivatives. Compares the result obtained by this method with those from earlier studies that used classical methods of chemical analysis (the so‐called wet methods). Finds that FTIR has several advantages over the classical methods but, as spectroscopic assignments are still only tentative because of the complex nature of the lac resin, the FTIR data requires supplementing by other instrumental techniques such as FT‐Raman spectroscopy and solid state nuclear magnetic resonance.

To evaluate the competing reaction of isocyanate with cellulose and water which can provide direction for further studies on bonding and curing reactions of isocyanate with wood.

Two modern analytical techniques, Fourier transform infra‐red (FTIR) and X‐ray photoelectron spectroscopy (XPS), were used. The FTIR was used to identify the products of the reaction of phenyl isocyanate (PI) with alcohol, water, and cellulose; while the XPS was used to evaluate the proportions of isocyanate that reacted with water or cellulose when PI reacted with cellulose at different moisture contents (MCs), respectively.

Methods for the IR identifications of reaction results of PI with n‐propanol, water, and cellulose, in which the reactions of PI with water and PI with cellulose resulted in N,N′‐diphenylurea and carbamate, respectively, were developed. It was discovered that the extent of reaction of isocyanate and cellulose decreased with increasing cellulose MC, and 92.98 per cent isocyanate reacted with water when 9.78 per cent MC was reached. It was confirmed that the products of the PI reaction were distributed mainly on the surface of the cellulose particles.

The study only focused on the reaction of PI. However, the industrial isocyanates, e.g. methylene diphenyl diisocyanate (MDI), polymerized methylene diphenyl diisocyanate (p‐MDI) that have complexities in chemical structures and components, make analyses with FTIR and XPS impossible.

The paper provides some instructive information about the isocyanate reaction that will help understanding the characteristics of isocyanate and guiding the design of technology bonding isocyanate to fibre, wood, etc.

The application of FTIR and XPS for evaluating the reaction of isocyanate with cellulose having different MCs was novel and may be used as a reference for other relevant studies.

To evaluate the effect of the concentrations of isocyanate group and hydroxyl group and hydroxyl group species on the rate constants of isocyanate‐propanol reaction, and to reveal the kinetics of isocyanate‐hydroxyl reaction.

The in situ FTIR technique was employed to measure the group concentration evolutions, by which the rate constants were determined. Besides, the FTIR was used to detect the OH absorbance shifts during reaction and the OH absorbance at different concentrations. The kinetic mechanism of isocyanate‐propanol reaction was discussed with the combination of rate constants and FTIR spectra.

A new reaction mechanism, alcohol association mechanism, was proposed that could explain many phenomena. It was revealed that the rate constant was independent of the isocyanate concentration, while the concentration and species of hydroxyl groups had apparent effects on the rate constants. It was possible to calculate the number averaged degree of association of propanol with alcohol association mechanism.

The associated n‐propanol molecules that reacted with isocyanate to form urethane were the associated dimer and trimer predominately, while the iso‐propanol was the dimer.

The kinetics of isocyanate‐hydroxyl reaction and the alcohol association mechanism will be helpful to understand the preparation and curing of polyurethane, and their controls.

A new reaction mechanism, alcohol association mechanism, was proposed that could explain many phenomena that might not be interpreted by other mechanisms. The mechanism could be employed to calculate the number averaged degree of association of alcohols.

The purpose of this paper is to discuss the chemical characterization of failures and process materials for microelectronics assembly.

The analytical techniques used for chemical structures and compositions including Fourier transform infrared spectrometer (FTIR), scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy are conducted.

The residues on the golden finger are identified to be the flux used in the assembly processes. Besides, the contaminants on the processed and incoming connector pins are verified to be polyamides (–CONH functional groups) from housing material's residue. Three liquid fluxes used in wave soldering are analyzed by their chemical structure. One flux showing the OH groups at 3430 cm⁻¹ indicates higher acid contents. This consists with the acidic values specified by the supplier. Also, the solder mask under study has ever appeared peeled‐off issue. The FTIR spectra results indicated 62.2 percent degree of curing while vendor's spec is above 70 percent.

The establishment of the Infrared spectra database for fluxes and process materials help determine the root cause of the contaminants to reduce re‐occurrence of similar problems and thus enhance the manufacturing capability. The infrared spectrophotometry technique can be used by professional original design manufacturing and/or electronics manufacturing service, providers to investigate board/component defects during product pilot run stage and volume production.

This paper aims to establish the acid concentration of finely dispersed droplets in hydrocarbon oils. Small quantities of aqueous sulphuric acid (H₂SO₄) were found to be trapped within hydrocarbon shells, making them inaccessible for concentration evaluation by titration.

Fourier transform infrared spectroscopy (FTIR) used in the attenuated total reflection mode (ATR; FTIR-ATR) was applied to study the reaction products of squalane, C₃₀H₆₂, and an API Group I base oil with various concentrations of aqueous H₂SO₄.

The absorbance comparison usually used for estimating acid concentrations was found to fail when small quantities of acid are trapped in the reaction product. It was found that the peak shift and changes in absorbance found for various pure aqueous acid concentrations were useful to establish the remaining concentration of the trapped H₂SO₄.

This paper fulfils the identified need to study acid dissociation-dependent peak shifts of H₂SO₄ to find the acid concentration of finely dispersed droplets in hydrocarbon oils.

This study aims to identify the bioactive compounds in the Onion (Allium burdickii [A.B]) bulb using Raman and Fourier transform infrared spectroscopy (FTIR) spectroscopy. It assessed the extraction conditions of bioactive compounds from A.B. while evaluating the best extraction conditions.

The research opted for an experimental qualitative approach. It examined the extraction conditions of A.B., namely, temperature (°C), time (min) and mass-to-liquor ratio (M:R) using ultraviolet-visible spectrophotometry. Identification of bioactive compounds present in the dye was performed using Raman spectroscopy and the validation of the results was done by FTIR spectroscopy.

The study determined the best extraction conditions (time, temperature, M:R) for A.B bulb. The study confirmed the presence of bioactive compounds.

The limitation was quantification of bioactive compounds in A.B bulb.

The findings prove that the A.B. bulb can provide a sustainable source of bioactive compounds (functionalized compounds). The study provides suitable extraction conditions for A.B. and further elaborates on the techniques for identifying bioactive compounds in A.B. bulb extracts.

The study provides A.B. as a source of bioactive compounds and a clean dye for textile coloration.

To the best of the authors’ knowledge, there is no documented study on the qualitative analysis of bioactive compounds in A.B using Raman and FTIR. Therefore, the study fulfils the identified need to ascertain alternative procedures for the analysis of bioactive compounds.

The purpose of this paper is to check the actual life of lubricating oil.

Present work aims to find the remaining useful life of the lubricant based on study of periodic deterioration of oil. Chronological samples of oil were selected from the dumper of a local open cast mine. The deterioration in oil was studied using Fourier transform infrared (FTIR) spectroscopy.

The data obtained from FTIR spectroscopy was used in vector projection approach and analytical hierarchy process to evaluate the remaining useful life of the lubricating oil.

FTIR spectra were used to study the periodic deterioration of oil. IR radiation with all frequencies in the range was passed through the sample. Radiations at certain frequency, depending upon the molecular structure of compounds in the sample were absorbed and rest was transmitted by the sample. A spectrum representing molecular absorption or transmission was obtained. Transmission spectra have been used in the study. Comparing the percent value of transmission peak of different chronological sample with that of fresh oil was used to represent the periodic degradation in oil.

The purpose of this paper is to investigate the effect of thermal‐oxidative aging at 150°C on the mechanical properties of carbon fibre reinforced bismaleimide composites.

Composites specimens after thermo‐oxidative aging at 150°C for various times (up to 1,000 h) were investigated by scanning electron microscopy (SEM) for fracture morphology, Fourier transform infrared (FTIR) spectroscopy for chemical structures, and flexural strength test and inter‐laminar shear strength (ILSS) test for mechanical properties.

The results indicated that the mechanical properties of carbon fibre/BMI composites were affected significantly by testing temperature rather than by aging time. SEM results showed that the good adhesion of fibre and matrix resulted in the better mechanical properties. The composites showed lower flexural strength and ILSS at 150°C due to the viscoelastic behaviour of matrix resin. The FTIR spectra confirmed the decomposition of crosslinked maleimide occurred just on the surface of composites during various aging times.

Results indicated that carbon fibre/BMI composites had excellent heat resistance and aging resistance.

Due to their excellent thermal and mechanical properties, the carbon fibre/BMI composites show greater potential for their applications in some extreme fields such as aerospace and machine.

The paper investigates the relationships of the fracture morphologies of composites and chemical structures of matrix resin to the mechanical properties after thermo‐oxidative aging.

The purpose of this paper is to identify different automotive coatings using Confocal Raman microscope which could hardly be differentiated with Fourier transform infrared microscope (FTIR).

Raman spectroscopy was used to provide extra vibration information to infrared spectroscopy. Paints preparation was not necessary, and only 30 s was needed for each sample in an optimised method. Paints were first analysed by FTIR and then compared with Raman microscope.

Raman microscope was used to address the lack of ability of FTIR in discriminating four groups of paints in same colours. This study indicated that Raman microscopy is especially effective in sensing pigments and could successfully identify all pigments in the paints.

The two instruments in combination produce accurate results than when used individually, especially in complex and multi-layered paints analysis.

The method proved to be fast, accurate and non-destructive, and it could be easily applied to real cases.

With this method, scientists could discriminate some coating types which were hard to be discriminated by other techniques.

Consumption of game meat is growing when compared to other meats. It is susceptible to adulteration because of its cost and availability. Spectroscopy may lead to rapid methodologies for detecting adulteration. The purpose of this study is to detect the adulteration of wild fallow deer (Dama dama) meat with domestic goat (G) (Capra aegagrus hircus) meat, for samples stored for different periods of time using Fourier transform infrared (FTIR) spectroscopy coupled with chemometric.

Meat was cut and mixed in different percentages, transformed into mini-burgers and stored at 3°C from 12 to 432 h and periodically examined for FTIR, pH and microbial analysis. Principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were applied to detect adulteration.

The PCA model, applied to the spectral region from 1,138 to 1,180, 1,314 to 1,477, 1,535 to 1,556 and from 1,728 to 1,759 cm⁻¹, describes the adulteration using four principal components which explained 95 per cent of variance. For the levels of Adulteration A1 (pure meat), A2 (25 and 50 %w/wG) and A3 (75 and 100 %w/wG) for an external set of samples, the correlation coefficients for prediction were 0.979, 0.941 and 0.971, and the room mean square error were 8.58, 12.46 and 9.47 per cent, respectively.

The PLS-DA model predicted the adulteration for an external set of samples with high accuracy. The proposed method has the advantage of allowing rapid results, despite the storage time of the adulterated meat. It was shown that FTIR combined with chemometrics can be used to establish a methodology for the identification of adulteration of game meat, not only for fresh meat but also for meat stored for different periods of time.