Search results

The purpose of this study is to reveal the underlying mechanism in film formation of oil-in-water (O/W) emulsion.

This study focuses on the film forming characteristics of O/W emulsion between the surface of a steel ball and a glass disc coated with chromium. The lubricant film thicknesses of O/W emulsion with various mechanical stirring strength were discussed, which were observed by technique of relative optical interference intensity.

The authors directly observed the oil pool in the contact area, finding the size of oil pool was closely related to the film-forming ability of emulsion. Enrichment phenomenon occurs in oil pool, which was caused by phase inversion. Further investigations revealed that the emulsion is stable with strong stirring strength, resulting in a smaller oil pool size and worse film forming ability.

With the wide usage of O/W emulsion in both biological and industrial systems, the ability of emulsion film formation is considered as an important factor to evaluate the lubrication effectiveness.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2022-0354/

The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing technique, which can be applied to a very wide range of materials, with particular emphasis on metals. In this paper, the governing principles of both laser-based subtractive of metals (LB-SM) and laser-based powder bed fusion (LB-PBF) of metallic materials are discussed and evaluated in terms of performance and capabilities. Using the principles of both laser-based methods, some new potential hybrid additive manufacturing options are discussed.

Production characteristics, such as surface quality, dimensional accuracy, material range, mechanical properties and applications, are reviewed and discussed. The process parameters for both LB-PBF and LB-SM were identified, and different factors that caused defects in both processes are explored. Advantages, disadvantages and limitations are explained and analyzed to shed light on the process selection for both additive and subtractive processes.

The performance of subtractive and additive processes is highly related to the material properties, such as diffusivity, reflectivity, thermal conductivity as well as laser parameters. LB-PBF has more influential factors affecting the quality of produced parts and is a more complex process. Both LB-SM and LB-PBF are flexible manufacturing methods that can be applied to a wide range of materials; however, they both suffer from low energy efficiency and production rate. These may be useful when producing highly innovative parts detailed, hollow products, such as medical implants.

This paper reviews the literature for both LB-PBF and LB-SM; nevertheless, the main contributions of this paper are twofold. To the best of the authors’ knowledge, this paper is one of the first to discuss the effect of the production process (both additive and subtractive) on the quality of the produced components. Also, some options for the hybrid capability of both LB-PBF and LB-SM are suggested to produce complex components with the desired macro- and microscale features.

This study aims to demonstrate a modified wire arc additive manufacturing (AM) named non-transferring arc and wire AM (NTA-WAM). Here, the build plate has no electrical arc attachment, and the system’s arc is ignited between tungsten electrode and filler wire.

The effect of various deposition conditions (welding voltage, travel speed and wire feed speed [WFS]) on bead characteristics is studied through response surface methodology (RSM). Under optimum deposition condition, a single-bead and thin-layered part is fabricated and subjected to microstructural, tensile testing and X-ray diffraction study. Moreover, bulk texture analysis has been carried out to illustrate the effect of thermal cycles and tensile-induced deformations on fibre texture evolutions.

RSM illustrates WFS as a crucial deposition parameter that suitably monitors bead width, height, penetration depth, dilution, contact angle and microhardness. The ferritic (acicular and polygonal) and lath bainitic microstructure is transformed into ferrite and pearlitic micrographs with increasing deposition layers. It is attributed to a reduced cooling rate with increased depositions. Mechanical testing exhibits high tensile strength and ductility, which is primarily due to compressive residual stress and lattice strain development. In deposits, ϒ-fibre evolution is more resilient due to the continuous recrystallisation process after each successive deposition. Tensile-induced deformation mostly favours ζ and ε-fibre development due to high strain accumulations.

This modified electrode arrangement in NTA-WAM suitably reduces spatter and bead height deviation. Low penetration depth and dilution denote a reduction in heat input that enhances the cooling rate.

The hygroscopic properties of 3D-printed filaments and moisture absorption itself during the process result in dimensional inaccuracy, particularly for nozzle movement along the x-axis and for micro-scale features. In view of that, this study aims to analyze in depth the dimensional errors and deviations of the fused filament fabrication (FFF)/fused deposition modeling (FDM) 3D-printed micropillars (MPs) from the reference values. A detailed analysis into the variability in printed dimensions below 1 mm in width without any deformations in the printed shape of the designed features, for challenging filaments like polymethyl methacrylate (PMMA) has been done. The study also explores whether the printed shape retains the designed structure.

A reference model for MPs of width 800 µm and height 2,000 µm is selected to generate a g-code model after pre-processing of slicing and meshing parameters for 3D printing of micro-scale structure with defined boundaries. Three SETs, SET-A, SET-B and SET-C, for nozzle diameter of 0.2 mm, 0.25 mm and 0.3 mm, respectively, have been prepared. The SETs containing the MPs were fabricated with the spacing (S) of 2,000 µm, 3,200 µm and 4,000 µm along the print head x-axis. The MPs were measured by taking three consecutive measurements (top, bottom and middle) for the width and one for the height.

The prominent highlight of this study is the successful FFF/FDM 3D printing of thin features (<1mm) without any deformation. The mathematical analysis of the variance of the optical microscopy measurements concluded that printed dimensions for micropillar widths did not vary significantly, retaining more than 65% of the recording within the first standard deviation (SD) (±1 s). The minimum value of SD is obtained from the samples of SET-B, that is, 31.96 µm and 35.865 µm, for height and width, respectively. The %RE for SET-B samples is 5.09% for S = 2,000µm, 3.86% for S = 3,200µm and 1.09% for S = 4,000µm. The error percentage is so small that it could be easily compensated by redesigning.

The study does not cover other 3D printing techniques of additive manufacturing like stereolithography, digital light processing and material jetting.

The presented study can be potentially implemented for the rapid prototyping of microfluidics mixer, bioseparator and lab-on-chip devices, both for membrane-free bioseparation based on microfiltration, plasma extraction from whole blood, size-selection trapping of unwanted blood cells, and also for membrane-based plasma extraction that requires supporting microstructures. Our developed process may prove to be far more economical than the other existing techniques for such applications.

For the first time, this work presents a comprehensive analysis of the fabrication of micropillars using FDM/FFF 3D printing and PMMA in filament form. The primary focus of the study is to minimize the dimensional inaccuracies in the 3D printed devices containing thin features, especially in the area of biomedical engineering, by delivering benefits from the choice of the parameters. Thus, on the basis of errors and deviations, a thorough comparison of the three SETs of the fabricated micropillars has been done.

This paper aims to investigate the influence of “BroncoCut-X” (copper core-ZnCu50 coating) electrode on the machining of Ti-3Al-2.5V in view of its extensive use in aerospace and medical applications. The machining parameters are selected as Spark-off Time (ST_off), Spark-on Time (ST_on), Wire-speed (S_w), Wire-Tension (WT) and Servo-Voltage (S_v) to explore the machining outcomes. The response characteristics are measured in terms of material removal rate (MRR), average kerf width (KW) and average-surface roughness (SA).

Taguchi’s approach is used to design the experiment. The “AC Progress V2 high precision CNC-WEDM” is used to conduct the experiments with ϕ 0.25 mm diameter wire electrode. The machining performance characteristics are examined using main effect plots and analysis of variance. The grey-relation analysis and fuzzy interference system techniques have been developed to combine (called grey-fuzzy reasoning grade) the experimental response while Rao-Algorithm is used to calculate the optimal performance.

The hybrid optimization result is obtained as ST_off = 50µs, ST_on = 105µs, S_w = 7 m/min, WT = 12N and S_v=20V. Additionally, the result is compared with the firefly algorithm and improved gray-wolf optimizer to check the efficacy of the intended approach. The confirmatory test has been further conducted to verify optimization results and recorded 8.14% overall machinability enhancement. Moreover, the scanning electron microscopy analysis further demonstrated effectiveness in the WEDMed surface with a maximum 4.32 µm recast layer.

The adopted methodology helped to attain the highest machinability level. To the best of the authors’ knowledge, this work is the first investigation within the considered parametric range and adopted optimization technique for Ti-3Al-2.5V using the wire-electro discharge machining.

This study aims to propose the reuse of PA12 (powder) in another AM process, binder jettiinng, which is less sensitive to the chemical and mechanical degradation of the powder after multiple cycles in the laser system.

The experimental process for evaluating the reuse of SLS powders in a subsequent binder jetting process consists of four phases: powder characterization, bonding analysis, mixture testing and mixture characteristics. Analyses were carried out using techniques such as Fourier Transform Infrared Spectroscopy, scanning electron microscopy, thermogravimetric analysis and stress–strain tests for tension and compression. The surface roughness, color, hardness and density of the new mixture were also determined to find physical characteristics. A Taguchi design L8 was used to search for a mixture with the best mechanical strength.

The results indicated that the integration of waste powder PA12 with calcium sulfate hemihydrate (CSH) generates appropriate particle distribution with rounded particles of PA12 that improve powder flowability. The micropores observed with less than 60 µm, facilitated binder and infiltrant penetration on 3D parts. The 60/40 (CSH-PA12) mixture with epoxy resin postprocessing was found to be the best-bonded mixture in mechanical testing, rugosity and hardness results. The new CSH-PA12 mixture resulted lighter and stronger than the CSH powder commonly used in binder jetting technology.

This study adds value to the polymer powder bed fusion process by using its waste in a circular process. The novel reuse of PA12 waste in an established process was achieved in an accessible and economical manner.

As physical evidence, servicescapes play a crucial role in tangibilizing service value. Since value creation and consumption are inseparable in many services, servicescapes also contribute significantly to consumer experiences. By reviewing the role of design factors on the physical and psychological safety of customers, particularly in different service contexts based on social factors, this paper aims to provide insights into how servicescape frameworks may be re-examined from a safety perspective.

Based on a critical review of studies in multidisciplinary domains, including environmental psychology, community medicine, architecture and engineering, this paper proposes a conceptual model anchored in stimulus–organization–response (S-O-R) theory and presents related propositions for safer servicescape designs.

The study reveals the need for re-evaluating current servicescape design frameworks by incorporating the concept of servicescape safety, discusses the significance of various interior factors and presents the moderating effects of social factors and service types on perceived safety.

With no robust models currently available to evaluate the impact of servicescape designs on users' physical and psychological safety, this paper provides guidelines based on a multidisciplinary review of studies. A healthy and safe servicescape requires interdisciplinary investigations, the results of which will reshape future design approaches.

The purpose of this study is to understand the behavior of hybrid bio-composites under varied applications.

Fabrication methods and material characterization of various hybrid bio-composites are analyzed by studying the tensile, impact, flexural and hardness of the same. The natural fiber is a manufactured group of assembly of big or short bundles of fiber to produce one or more layers of flat sheets. The natural fiber-reinforced composite materials offer a wide range of properties that are suitable for many engineering-related fields like aerospace, automotive areas. The main characteristics of natural fiber composites are durability, low cost, low weight, high specific strength and equally good mechanical properties.

The tensile properties like tensile strength and tensile modulus of flax/hemp/sisal/Coir/Palmyra fiber-reinforced composites are majorly dependent on the chemical treatment and catalyst usage with fiber. The flexural properties of flax/hemp/sisal/coir/Palmyra are greatly dependent on fiber orientation and fiber length. Impact properties of flax/hemp/sisal/coir/Palmyra are depended on the fiber content, composition and orientation of various fibers.

This study is a review of various research work done on the natural fiber bio-composites exhibiting the factors to be considered for specific load conditions.

A wide number of technologies are currently in store to harness the challenges posed by pandemic situations. As such diseases transmit by way of person-to-person contact or by any other means, the World Health Organization had recommended location tracking and tracing of people either infected or contacted with the patients as one of the standard operating procedures and has also outlined protocols for incident management. Government agencies use different inputs such as smartphone signals and details from the respondent to prepare the travel log of patients. Each and every event of their trace such as stay points, revisit locations and meeting points is important. More trained staffs and tools are required under the traditional system of contact tracing. At the time of the spiralling patient count, the time-bound tracing of primary and secondary contacts may not be possible, and there are chances of human errors as well. In this context, the purpose of this paper is to propose an algorithm called SemTraClus-Tracer, an efficient approach for computing the movement of individuals and analysing the possibility of pandemic spread and vulnerability of the locations.

Pandemic situations push the world into existential crises. In this context, this paper proposes an algorithm called SemTraClus-Tracer, an efficient approach for computing the movement of individuals and analysing the possibility of pandemic spread and vulnerability of the locations. By exploring the daily mobility and activities of the general public, the system identifies multiple levels of contacts with respect to an infected person and extracts semantic information by considering vital factors that can induce virus spread. It grades different geographic locations according to a measure called weightage of participation so that vulnerable locations can be easily identified. This paper gives directions on the advantages of using spatio-temporal aggregate queries for extracting general characteristics of social mobility. The system also facilitates room for the generation of various information by combing through the medical reports of the patients.

It is identified that context of movement is important; hence, the existing SemTraClus algorithm is modified by accounting for four important factors such as stay point, contact presence, stay time of primary contacts and waypoint severity. The priority level can be reconfigured according to the interest of authority. This approach reduces the overwhelming task of contact tracing. Different functionalities provided by the system are also explained. As the real data set is not available, experiments are conducted with similar data and results are shown for different types of journeys in different geographical locations. The proposed method efficiently handles computational movement and activity analysis by incorporating various relevant semantics of trajectories. The incorporation of cluster-based aggregate queries in the model do away with the computational headache of processing the entire mobility data.

As the trajectory of patients is not available, the authors have used the standard data sets for experimentation, which serve the purpose.

This paper proposes a framework infrastructure that allows the emergency response team to grab multiple information based on the tracked mobility details of a patient and facilitates room for various activities for the mitigation of pandemics such as the prediction of hotspots, identification of stay locations and suggestion of possible locations of primary and secondary contacts, creation of clusters of hotspots and identification of nearby medical assistance. The system provides an efficient way of activity analysis by computing the mobility of people and identifying features of geographical locations where people travelled. While formulating the framework, the authors have reviewed many different implementation plans and protocols and arrived at the conclusion that the core strategy followed is more or less the same. For the sake of a reference model, the Indian scenario is adopted for defining the concepts.

This paper aims to derive a reduced-order model for the heat transfer across the interface between a millimetric thermocapillary liquid bridge from silicone oil and the surrounding ambient gas.

Numerical solutions for the two-fluid model are computed covering a wide parametric space, making a total of 2,800 numerical flow simulations. Based on the computed data, a reduced single-fluid model for the liquid phase is devised, in which the heat transfer between the liquid and the gas is modeled by Newton’s heat transfer law, albeit with a space-dependent Biot function Bi(z), instead of a constant Biot number Bi.

An explicit robust fit of Bi(z) is obtained covering the whole range of parameters considered. The single-fluid model together with the Biot function derived yields very accurate results at much lesser computational cost than the corresponding two-phase fully-coupled simulation required for the two-fluid model.

Using this novel Biot function approach instead of a constant Biot number, the critical Reynolds number can be predicted much more accurately within single-phase linear stability solvers.

The Biot function for thermocapillary liquid bridges is derived from the full multiphase problem by a robust multi-stage fit procedure. The derived Biot function reproduces very well the theoretical boundary layer scalings.