Search results

1 – 10 of over 38000
Article
Publication date: 6 July 2020

Johanna J. Schwartz, Joshua Hamel, Thomas Ekstrom, Leticia Ndagang and Andrew J. Boydston

Additive manufacturing (AM) methods such as material extrusion (ME) are becoming widely used by engineers, designers and hobbyists alike for a wide variety of applications…

Abstract

Purpose

Additive manufacturing (AM) methods such as material extrusion (ME) are becoming widely used by engineers, designers and hobbyists alike for a wide variety of applications. Successfully manufacturing objects using ME three-dimensional printers can often require numerous iterations to attain predictable performance because the exact mechanical behavior of parts fabricated via additive processes are difficult to predict. One of that factors that contributes to this difficulty is the wide variety of ME feed stock materials currently available in the marketplace. These build materials are often sold based on their base polymer material such as acrylonitrile butadiene styrene or polylactic acid (PLA), but are produced by numerous different commercial suppliers in a wide variety of colors using typically undisclosed additive feed stocks and base polymer formulations. This paper aims to present the results from an experimental study concerned with quantifying how these sources of polymer variability can affect the mechanical behavior of three-dimensional printed objects. Specifically, the set of experiments conducted in this study focused on following: several different colors of PLA filament from a single commercial supplier to explore the effect of color additives and three filaments of the same color but produced by three different suppliers to account for potential variations in polymer formulation.

Design/methodology/approach

A set of five common mechanical and material characterization tests were performed on 11 commercially available PLA filaments in an effort to gain insight into the variations in mechanical response that stem from variances in filament manufacturer, feed stock polymer, additives and processing. Three black PLA filaments were purchased from three different commercial suppliers to consider the variations introduced by use of different feed stock polymers and filament processing by different manufacturers. An additional eight PLA filaments in varying colors were purchased from one of the three suppliers to focus on how color additives lead to property variations. Some tests were performed on unprocessed filament samples, while others were performed on objects three-dimensional printed from the various filaments. This study looked specifically at four mechanical properties (Young’s modulus, storage modulus, yield strength and toughness) as a function of numerous material properties (e.g. additive loading, molecular weight, molecular weight dispersity, enthalpy of melting and crystallinity).

Findings

For the 11 filaments tested the following mean values and standard deviations were observed for the material properties considered: pa = 1.3 ± 0.9% (percent additives), Mw = 98.6 ± 16.4 kDa (molecular weight), Ð = 1.33 ± 0.1 (molecular weight dispersity), Hm = 37.4 ± 7.2 J/g (enthalpy of melting) and = 19.6 ± 2.1% (crystallinity). The corresponding mean values and standard deviations for the resulting mechanical behaviors were: E = 2,790 ± 145 MPa (Young’s modulus), E’ = 1,050 ± 125 MPa (storage modulus), Sy = 49.6 ± 4.93 MPa (yield strength) and Ut = 1.87 ± 0.354 MJ/m^3 (toughness). These variations were observed in filaments that were all manufactured from the same base polymer (e.g. PLA) and are only different in terms of the additives used by the manufacturers to produce different colors or different three-dimensional printing performance. Unfortunately, while the observed variations were significant, no definitive strong correlations were found between these observed variations in the mechanical behavior of the filaments studied and the considered material properties.

Research limitations/implications

These variations in mechanical behavior and material properties could not be ascribed to any specific factor, but rather show that the mechanical of three-dimensional printed parts are potentially affected by variations in base polymer properties, additive usage and filament processing choices in complex ways that can be difficult to predict.

Practical implications

These results emphasize the need to take processing and thereby even filament color, into account when using ME printers, they emphasize the need for designers to use AM with caution when the mechanical behavior of a printed part is critical and they highlight the need for continued research in this important area. While all filaments used were marked as PLA, the feedstock materials, additives and processing conditions created significant differences in the mechanical behavior of the printed objects evaluated, but these differences could not be accurately and reliably predicted as function of the observed material properties that were the focus of this study.

Originality/value

The testing methods used in the study can be used by engineers and creators alike to better analyze the material properties of their filament printed objects, to increase success in print and mechanical design. Furthermore, the results clearly show that as AM continues to evolve and grow as a manufacturing method, standardization of feedstock processing conditions and additives would enable more reliable and repeatable printed objects and would better assist designers in effectively implementing AM methods.

Details

Rapid Prototyping Journal, vol. 26 no. 7
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 1 January 1995

T. Yamada, R. Doyle and J. Barrett

The reduction in IC package lead pitches in surface mount solder assembly and the current high emphasis on quality and reliability of printed circuit assemblies have created a…

Abstract

The reduction in IC package lead pitches in surface mount solder assembly and the current high emphasis on quality and reliability of printed circuit assemblies have created a requirement for microanalysis of fine pitch solder joints in manufacturing situations. Of particular interest are metallographic analysis, detection of solder joint defects and mechanical strength testing of solder joints. Much has been published in the literature on the results of such evaluations in specific applications but little has been available on procedures for use in the microanalysis itself, particularly for fine pitch solder joints. Detailed procedures for fine pitch solder joint microanalysis, which the authors have verified down to 0.5 mm (0.02 in.) lead pitches, are presented. In particular, the authors present procedures for metallographic examination of tin‐lead and tin‐lead‐silver solder joints. In addition, test parameters are given for a repeatable technique of fine pitch solder joint mechanical strength testing that allows mechanical strength measurements to be obtained from almost every lead on a fine pitch surface mount IC package.

Details

Soldering & Surface Mount Technology, vol. 7 no. 1
Type: Research Article
ISSN: 0954-0911

Article
Publication date: 20 November 2007

George K. Stylios

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects…

1544

Abstract

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Details

International Journal of Clothing Science and Technology, vol. 19 no. 6
Type: Research Article
ISSN: 0955-6222

Keywords

Article
Publication date: 1 January 1994

T. Yamada, J. Barrett, R. Doyle and A. Boetti

The use of Taguchi experimental design techniques to examine the effects of package type, solder paste type and solder reflow technique on the quality of fine pitch surface mount…

Abstract

The use of Taguchi experimental design techniques to examine the effects of package type, solder paste type and solder reflow technique on the quality of fine pitch surface mount IC package solder joints is described. In particular, the effect of the use of ceramic or plastic packages, copper or Alloy 42 leadframes, silver loaded or non‐silver loaded solder paste and infra‐red, laser or hot‐bar reflow on solder joint metallurgical structure, electrical resistance and mechanical strength is evaluated. In addition to these solder joint parameters, an associated visual inspection was used to find the best process parameters to minimise solder balling, bridging etc. and a correlation between paste contacts at placement and solder bridges after reflow was also conducted. The experiment used an L9 array to find the optimum parameters from three factors, each at three levels. An extension to the basic Taguchi array was included in the form of an outer (noise) factor to include the effect of climatic stress on the solder joints under investigation. Response tables separate out the contribution of each factor level to the mechanical strength and electrical resistance of the assemblies. By comparing the response tables before and after climatic testing it is possible to estimate the effect of each factor level on the long‐term quality of the solder joints. It is shown how Taguchi experimental design techniques can be used to minimise the number of experiments required to predict optimum solder assembly process parameters. The accuracy of the prediction is shown by the results of a confirmation run which yielded mechanical strengths very close to those predicted, both before and after highly accelerated stress testing of the solder assemblies.

Details

Soldering & Surface Mount Technology, vol. 6 no. 1
Type: Research Article
ISSN: 0954-0911

Article
Publication date: 28 June 2023

Cristina-Elisabeta Pelin, Alexandra-Raluca Axenie, Adrian Gaz, George Pelin, Adriana Stefan, Cristian Moisei and Albert Arnau Cubillo

This paper aims to present the procedures necessary to determine the insert allowable for a composite sandwich, considering that the inserts were the most commonly used means to…

Abstract

Purpose

This paper aims to present the procedures necessary to determine the insert allowable for a composite sandwich, considering that the inserts were the most commonly used means to install equipment on the composite structure of Clean Sky 2 (CS2)-RACER compound helicopter.

Design/methodology/approach

The installation of the equipment inside of the airframe shall comply with the certification regulations, especially in relation to the inertial factors. Establishing of the needed number of inserts to fix the equipment is directly linked to the allowable coming from coupon tests. The materials and test procedures to which they were subjected are part of the process qualification used in the development of the CS2-RACER Main Fuselage. The samples were tested in two different static mechanical loadings, consisting of pull-out insert and shear-out insert tests. The mechanical behaviour and failure mechanism of the materials were evaluated using optical and scanning electron microscopy.

Findings

The insert installation on the sandwich structure influences the behaviour and mechanical properties during pull-out and shear-out testing.

Research limitations/implications

The limited data available in standardized documents related to insert testing makes it difficult to compare results with certified baseline values.

Practical implications

To reduce the effort of selecting the optimized insert system, specific parameters are included in analytical pre-sizing, i.e. type of loads, geometry, materials, failure modes, special conditions such as manufacturing and testing.

Originality/value

The results of the study presenting the design, manufacturing and mechanical testing of pull-out and shear-out inserts used in composite materials sandwich-type coupons provide valuable information regarding the insert allowable determination.

Details

Aircraft Engineering and Aerospace Technology, vol. 95 no. 9
Type: Research Article
ISSN: 1748-8842

Keywords

Article
Publication date: 14 November 2008

George K. Stylios

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects…

1246

Abstract

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Details

International Journal of Clothing Science and Technology, vol. 20 no. 6
Type: Research Article
ISSN: 0955-6222

Keywords

Article
Publication date: 23 June 2021

Radhwan Bin Hussin, Safian Bin Sharif, Shayfull Zamree Bin Abd Rahim, Mohd Azlan Bin Suhaimi, Mohd Tanwyn Bin Mohd Khushairi, Abdellah Abdellah EL-Hadj and Norshah Afizi Bin Shuaib

Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype…

Abstract

Purpose

Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype applications, especially in the development of new products. The purpose of this study is to analyze the current application trends of RT techniques in producing hybrid mold inserts.

Design/methodology/approach

The direct and indirect RT techniques discussed in this paper are aimed at developing a hybrid mold insert using metal epoxy composite (MEC) in increasing the speed of tooling development and performance. An extensive review of the suitable development approach of hybrid mold inserts, material preparation and filler effect on physical and mechanical properties has been conducted.

Findings

Latest research studies indicate that it is possible to develop a hybrid material through the combination of different shapes/sizes of filler particles and it is expected to improve the compressive strength, thermal conductivity and consequently increasing the hybrid mold performance (cooling time and a number of molding cycles).

Research limitations/implications

The number of research studies on RT for hybrid mold inserts is still lacking as compared to research studies on conventional manufacturing technology. One of the significant limitations is on the ways to improve physical and mechanical properties due to the limited type, size and shape of materials that are currently available.

Originality/value

This review presents the related information and highlights the current gaps related to this field of study. In addition, it appraises the new formulation of MEC materials for the hybrid mold inserts in injection molding application and RT for non-metal products.

Details

Rapid Prototyping Journal, vol. 27 no. 6
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 24 August 2021

Sunthorn Chaitat, Nattapon Chantarapanich and Sujin Wanchat

This paper aims to investigate effect of infill density, fabricated built orientation and dose of gamma radiation to mechanical tensile and compressive properties of polylactic…

Abstract

Purpose

This paper aims to investigate effect of infill density, fabricated built orientation and dose of gamma radiation to mechanical tensile and compressive properties of polylactic acid (PLA) part fabricated by fused deposit modelling (FDM) technique for medical applications.

Design/methodology/approach

PLA specimens for tensile and compressive tests were fabricated using FDM machine. The specimens geometry and test method were referred to ASTM D638 and ASTM D695, respectively. Three orientations under consideration were flat, edge and upright, whereas the infill density ranged from 0 to 100%. The gamma radiation dose used to expose to specimens was 25 kGy. The collected data included stress and strain, which was used to find mechanical properties, i.e. yield strength, ultimate tensile strength (UTS), fracture strength, elongation at yield, elongation at UTS and elongation at break. The t-test was used to access the difference in mechanical properties.

Findings

Compressive mechanical properties is greater than tensile mechanical properties. Increasing number of layer parallel to loading direction and infill density, it enhances the material property. Upright presents the lowest mechanical property in tensile test, but greatest in compressive test. Upright orientation should not be used for part subjecting to tensile load. FDM is more proper for part subjecting to compressive load. FDM part requires undergoing gamma ray for sterilisation, the infill density no less than 70 and 60% should be selected for part subjecting to tensile and compressive load, respectively.

Originality/value

This study investigated all mechanical properties in both tension and compression as well as exposure to gamma radiation. The results can be applied in selection of FDM parameters for medical device manufacturing.

Details

Rapid Prototyping Journal, vol. 28 no. 1
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 13 November 2009

George K. Stylios

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects…

1093

Abstract

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Details

International Journal of Clothing Science and Technology, vol. 21 no. 6
Type: Research Article
ISSN: 0955-6222

Keywords

Article
Publication date: 30 May 2023

Ravikantha Prabhu, Sharun Mendonca, Pavana Kumara Bellairu, Rudolf Charles DSouza and Thirumaleshwara Bhat

This paper aims to report the effect of titanium oxide (TiO2) particles on the physical, mechanical, tribological and water resistance properties of 5% NaOH-treated bamboo…

Abstract

Purpose

This paper aims to report the effect of titanium oxide (TiO2) particles on the physical, mechanical, tribological and water resistance properties of 5% NaOH-treated bamboo fiber–reinforced composites.

Design/methodology/approach

In this research, the epoxy/bamboo/TiO2 hybrid composite filled with 0–8 Wt.% TiO2 particles has been fabricated using simple hand layup techniques, and testing of the developed composite was done in accordance with the American Society for Testing and Materials (ASTM) standard.

Findings

The results of this study indicate that the addition of TiO2 particles improved the mechanical properties of the developed epoxy/bamboo composites. Tensile properties were found to be maximum for 6 Wt.%, and impact strength was found to be maximum for 8 Wt.% TiO2 particles-filled composite. The highest flexural properties were found at a lower TiO2 fraction of 2 Wt.%. Adding TiO2 filler helped to reduce the water absorption rate. The studies related to the wear and friction behavior of the composite under dry and abrasive wear conditions reveal that TiO2 filler was beneficial in improving the wear performance of the composite.

Originality/value

This research paper attempts to include both TiO2 filler and bamboo fibers to develop a novel composite material. TiO2 micro and nanoparticles are promising filler materials; it helps to enhance the mechanical and tribological properties of the epoxy composites and in literature, there is not much work reported, where TiO2 is used as a filler material with bamboo fiber–reinforced epoxy composites.

Details

World Journal of Engineering, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1708-5284

Keywords

1 – 10 of over 38000