Search results

The aim of this study is to (1) construct a standard framework for assessing the capability of bioenergy enterprises' digital green innovation partners; (2) quantify the choice of partners for digital green innovation by bioenergy enterprises; (3) propose based on a dual combination empowerment niche digital green innovation field model.

Fuzzy set theory is combined into field theory to investigate resource complementarity. The successful application of the model to a real case illustrates how the model can be used to address the problem of digital green innovation partner selection. Finally, the standard framework and digital green innovation field model can be applied to the practical partner selection of bioenergy enterprises.

Digital green innovation technology of superposition of complementarity, mutual trust and resources makes the digital green innovation knowledge from partners to biofuels in the enterprise. The index rating system included eight target layers: digital technology innovation level, bioenergy technology innovation level, bioenergy green level, aggregated digital green innovation resource level, bioenergy technology market development ability, co-operation mutual trust and cooperation aggregation degree.

This study helps to (1) construct the evaluation standard framework of digital green innovation capability based on the dual combination empowerment theory; (2) develop a new digital green innovation domain model for bioenergy enterprises to select digital green innovation partners; (3) assist bioenergy enterprises in implementing digital green innovation practices.

This research assesses the economic impact of biomass plant installations on Brazilian municipalities, focusing on (1) labor income, (2) sectoral labor income and (3) income inequality.

Municipal data from the Annual Social Information Report, the National Electric Energy Agency and the National Institute of Meteorology spanning 2002 to 2020 are utilized. The Synthetic Difference-in-Differences methodology is employed for empirical analysis, and robustness checks are conducted using the Doubly Robust Difference in Differences and the Double/Debiased Machine Learning methods.

The findings reveal that biomass plant installations lead to an average annual increase of approximately R$688.00 in formal workers' wages and reduce formal income inequality, with notable benefits observed for workers in the industry and agriculture sectors. The robustness tests support and validate the primary results, highlighting the positive implications of renewable energy integration on economic development in the studied municipalities.

This article represents a groundbreaking contribution to the existing literature as it pioneers the identification of the impact of biomass plant installation on formal employment income and local economic development in Brazil. To the best of our knowledge, this study is the first to uncover such effects. Moreover, the authors comprehensively examine sectoral implications and formal income inequality.

This study aims to introduce the results of a research carried out to develop a prototype of a highly energy-efficient modular detached house, called CASA+ CASA means HOUSE in spanish, adapted to the climatic features of central-southern Chile. The project enables a sustainable alternative to facilitate the reconstruction of the residential areas after the impact of the 2010 earthquake.

The methodology is based on an “integrated design process” of a case study that proposes a constructive response that quantitatively and qualitatively improves the initial data of traditional dwellings. The characteristics of the new system have been simulated with specific software to validate the final decisions, considering the cost–benefit ratio.

Simulation tools were used to assess and improve the system’s energy performance with respect to present options and to analyse its economic and construction viability. We obtained several economically competitive housing prototypes that substantially reduced energy consumption and the CO₂ footprint by between 20% and 80%.

The prototype has not been developed, as we are waiting for funding, but all its energy features have been simulated.

Furthermore, this experience also identified similar modifications made to the design of the houses, which revealed general possibilities for improving energy performance.

The origin of this research is a public call for international researchers to improve the quality of the new homes to be built in Chile after the strong earthquake of 2010. The result of the research has been put at the direct service of Chilean society and in other international projects for the construction of low-energy social housing.

These are the result of a long research aimed at establishing a new architectural model that, in addition to improving the architectural quality of the product, obtains significant improvements in energy consumption and CO₂ emissions. The most particular aspect is the practical vocation and its implementation with real construction with the support of construction companies.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

This chapter tests theoretically and empirically the existence of a stable relationship between energy consumption and CO2 emissions. Based on microeconomics and physics, a model has been specified and applied to annual data for twenty countries, which representing 61 percent of the world’s population in 2018, over the period 1995–2015. The data are from the International Energy Agency (2019) and econometric techniques including panel data and causality tests have been used. The results indicate that there is a causal relationship between energy consumption and CO2 emissions. In general, consumers cannot directly change emissions caused by production processes, but they can act on emissions caused by their own domestic energy consumption. Approximately three quarters of domestic energy consumption is due to heating and domestic hot water consumption. Taking into account the lower emissions and the lower economic cost of the initial investment, four potential energy systems have been selected for use in heating and domestic hot water. Their social returns have been assessed across nine of the twenty countries in the sample over a lifecycle of 25 years from 2018: France, Portugal, Ireland, Spain, Iceland, Germany, United Kingdom, Morocco and the United States. Cost-benefit analysis techniques have been used for this purpose and the results indicate that the use of thermal water, where applicable, is the most socially profitable system among the proposed systems, followed by natural gas. The least socially profitable systems are those using electricity.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

This study aims to evaluate the thermal performance of sodium alginate (SA) aerogel attached to nano SiO₂ and its radiative cooling effect on firefighting clothing without environmental pollution.

SA/SiO₂ aerogel with refractory heat insulation and enhanced radiative cooling performance was fabricated by freeze-drying method, which can be used in firefighting clothing. The microstructure, chemical composition, thermal stability, and thermal emissivity were analyzed using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analyzer and infrared emissivity measurement instrument. The radiative cooling effect of aerogel was studied using thermal infrared imager and thermocouple.

When the addition of SiO₂ is 25% of SA, the prepared aerogel has excellent heat insulation and a high radiative cooling effect. Under a clear sky, the temperature of SA/SiO₂ aerogel is 9.4°C lower than that of pure SA aerogel and 22.1°C lower than that of the simulated environment. In addition, aerogel has more exceptional heat insulation effect than other common fabrics in the heat insulation performance test.

SA/SiO₂ aerogel has passive radiative cooling function, which can efficaciously economize global energy, and it is paramount to environment-friendly cooling.

This method could pave the way for high-performance cooling materials designed for firefighting clothing to keep maintain the wearing comfort of firefighters.

SA/SiO₂ aerogel used in firefighting clothing can release heat to the low-temperature outer space in the form of thermal radiation to achieve its own cooling purpose, without additional energy supply.

Energy consumption in transportation accounted for over 29% of total final consumption (TFC) of energy and 65% of global oil usage, and it is highly connected to mobility. Mobility is essential for access to day-to-day activities such as education, leisure, healthcare, business activities, and commercial and industrial operations. This study examines the energy consumption for the transport industry, and the level of renewable energy development in some selected Sub-Saharan African (SSA) nations. This study relied on previous publications of government, reports and articles related to the subject matter. Vehicle ownership is fast increasing, particularly in cities. Still, it begins at a relatively low level because the area is home to countries with the lowest ownership rates worldwide. In its current state, the energy sector faces significant challenges such as inadequate and poorly maintained infrastructure, dealing with increasing traffic congestion in cities, large-scale imports of used vehicles with poor emission standards that affect air quality in cities, a lack of safe and formally operated public transportation systems, and inadequate consideration for women and disabled mobility needs. Motorcycle and tricycle are dominating the rural areas, accounting for a substantial amount of this growth. Aviation is the largest non-road user of energy, and this trend is predicted to continue through 2040 as Gross Domestic Product (GDP) grows and urbanisation expands. This study revealed the energy consumption for the transport industry, and the level of renewable energy development in some selected SSA. Rail and navigation lag behind current global levels. The usage of biofuel and rail transport was recommended.

The global economy is facing a steep challenge from volatility, risk and uncertainty associated with climate change, pandemics, regional conflicts and trade wars which are unprecedented and overlapping. These crises are leading to macro- and microeconomic imbalances. The immediate effects like rising inflation, shortage of energy and fertiliser, food insecurity, loss of jobs and poverty are looming large, leading to existential threat. It is evident that decades of progress are at risk and pursuing sustainable development goals (SDGs) requires dedicated and customised efforts by the governments and other relevant actors, especially in the low- and middle-income countries (LMICS). The concept of circular economy is considered to bring a paradigm shift by reducing the dependence on natural resource extraction and decoupling economic growth from use of natural resources. Bioeconomy is another emerging field which deals with the use of renewable biological resources such as biomass to produce renewable biofuels, bioproducts, and biopower for economic, environmental and social benefits. Circular bioeconomy (CBE) lies at the intersection and is defined as the production of recoverable biological (waste) resources and the conversion of these resources into high-value-added products, such as food, feed, bio-based products and bioenergy. It has been estimated that the economic opportunity for the sector to complement or even substitute conventional ones is estimated to be USD 7.7 trillion by 2030 for food and feed waste products, and energy. CBE is perceived as a pathway for development and has the potential to target different SDGs directly like 6, 7 and 12 and SDGs 2, 3, 11, 12, 13 and 15 indirectly. This study explores the linkages of CBE with the SDG goals and provides recommendations to stimulate the sector.