Search results

Four‐quadrant AC‐DC converters are one kind of the most common and popular AC‐DC converters, which are serious EMI sources. The purpose of this paper is to propose a novel control for four‐quadrant AC‐DC converters to suppress the generated electromagnetic interference (EMI).

A chaotic carrier plays an important role to implement the chaotic PWM control. The relationship between the EMI distribution and carrier frequency is given by deducing and analyzing the harmonic components of the AC‐DC converter. The comparison of chaotic PWM control and random PWM control in suppressing EMI are provided.

The simulation results prove the effectiveness of the proposed chaotic PWM control on EMI reduction.

The effects of EMI suppression under different chaotic carriers will be theoretically analyzed in the future work.

The proposed chaotic PWM control can suppress EMI for converters without adding additional devices or components, therefore, without increasing the volume, weight and cost of converters.

In this paper, a novel chaotic pulse width modulation (PWM) control is proposed and implemented into a four‐quadrant AC‐DC converter for electromagnetic interference (EMI) suppression, moreover, the total harmonic distortion (THD) of the input AC current is also improved under chaotic PWM control.

This paper aims to develop a method for a unified model of pulse width modulation (PWM) voltage source inverters (VSI). This generic method, based on a common and easy-to-use carrier-based modulation, allows to generate the exhaustive solution set for a given PWM-VSI.

The use of the generalized inverse theory is developed to express the PWM solution set for the duty cycle. Indeed, the infinite number of PWM solutions is demonstrated. To explore this solution set, the unified model described exhibits degrees of freedom. The admissible margins to set the degree of freedom are highlighted. Some experimental results are presented.

It is demonstrated how the degree of freedom can be directly connected with efficiency indicators such as common mode voltage, inverter linearity and switching losses. The expression of the PWM solution set boundaries is clearly expressed.

Further studies should explore how the degree of freedom can be connected with parameters associated with the current (and not the voltage as described in this paper).

The paper includes implications for the development of a more generic approach for PWM multilevel VSI.

This paper fulfils a mathematical frame to ease the expression of PWM scheme.

This study aims to regarding the application of traditional pulse frequency modulation control full-bridge LLC resonant converters in wide output voltage fields such as on-board chargers, there are issues with wide frequency adjustment ranges and low conversion efficiency.

To address these issues, this paper proposes a fixed-frequency pulse width modulation (PWM) control strategy for a full-bridge LLC resonant converter, which adjusts the gain by adjusting the duty cycle of the switches. In the full-bridge LLC converter, the two switches of the lower bridge arm are controlled by a fixed-frequency and fixed duty cycle, with their switching frequency equal to the resonant frequency, whereas the two switches of the upper bridge arm are controlled by a fixed-frequency PWM to adjust the output voltage. The operation modes of the converter are analyzed in detail, and a mathematical model of the converter is established. The gain characteristics of the converter under the fixed-frequency PWM control strategy are deeply analyzed, and the conditions for implementing zero-voltage switching (ZVS) soft switching in the converter are also analyzed in detail. The use of fixed-frequency PWM control simplifies the design of resonant parameters, and the fixed-frequency control is conducive to the design of magnetic components.

According to the fixed-frequency PWM control strategy proposed in this paper, the correctness of the control strategy is verified through simulation and the development and testing of a 500-W experimental prototype. Test results show that the primary side switches of the converter achieve ZVS and the secondary side rectifier diodes achieve zero-current switching, effectively reducing the switching losses of the converter. In addition, the control strategy reduces the reactive circulating current of the converter, and the peak efficiency of the experimental prototype can reach 95.2%.

The feasibility of the fixed-frequency PWM control strategy was verified through experiments, which has significant implications for improving the efficiency of the converter and simplifying the design of resonant parameters and magnetic components in wide output voltage fields such as on-board chargers.

The losses incurred in ferromagnetic materials under PWM excitations must be predicted accurately to optimize the design of modern electrical machines. The purpose of this paper is to employ mathematical hysteresis models (i.e. classical Preisach model) to predict iron losses in electrical steels under PWM excitation without compromising the computational complexity of the model.

In this paper, a novel approach based on the dynamic inverse Preisach model is proposed to model the iron losses. The PWM magnetic flux density waveform is decomposed into its harmonic component using Fourier series and a weighted Everett function is computed based on these harmonic components. The Preisach model is applied for the given flux waveform and results are validated against the measurements.

The paper predicts the total iron loss by computing a weighted Everett function based on the harmonics present in PWM waveform. Moreover, it formulates the possibility of utilizing the classical Preisach model to predict iron losses under PWM excitation.

The approach is still limited in terms of its application at high frequencies. This work may eventually lead toward the accurate prediction of iron loss under PWM excitation in electromagnetic machine design.

The paper provides a simple approach applying the Preisach model for the prediction of iron losses under PWM excitation. The proposed approach does not require additional experimental data beyond B-H loops measured under sinusoidal excitation.

A novel approach is presented to incorporate the frequency dependence into a static inverse Preisach model. The approach extends the ability of the static Preisach model to compute total iron loss under PWM excitation using a weighted Everett function.

The model for digitally controlled three-phase pulse width modulation (PWM) boost rectifiers is a sampled data model, which is different from the continuous time domain models presented in previous studies. The controller, which is tuned according to the model in continuous time domain and discretized by approximation methods, may exhibit some unpredictable performances and even result in unstable systems under some extreme situations. Consequently, a small-signal discrete-time model of digitally controlled three-phase PWM boost rectifier is required. The purpose of this paper is to provide a simple but accurate small-signal discrete-time model of digital controlled three-phase PWM boost rectifier, which explains the effect of the sampling period, modulator and time delays on system dynamic and improves the control performance.

Based on the Laplace domain analysis and the waveforms of up-down-count modulator, the small signal model of digital pulse width modulation (DPWM) in the Laplace domain is presented. With a combination of state-space average and a discrete-time modeling technique, a simplified large signal discrete time model is developed. With rotation transformation and feed-forward decoupling, the large-signal model is decoupled into a single input single output system with rotation transformation. Then, an integrated small signal model in the Laplace domain is constructed that included the time delay and modulation effect. Implementing the modified z-transform, a small-signal discrete-time model is derived from the integrated small signal model.

In a digital control system, besides the circuit parameters, the location of pole of open-loop transfer function is also related to system sampling time, affecting the system stability, and the time delay determines the location of the zero of open-loop transfer function, affecting the system dynamic. In addition to the circuit parameters discussed in previous literature, the right half plane (RHP) zero is also determined by the sampling period and the time delay. Furthermore, the corner frequency of the RHP zero is mainly determined by the sampling period.

The model developed in this paper, accounting for the effect of the sampling period, modulator and time delays on the system dynamic, give a sufficient insight into the behavior of the digitally controlled three-phase PWM rectifier. It can also explain the effect of sampling period and control delay time on system dynamic, accurately predict the system stability boundary and determine the oscillation frequency of the current loop in critical stable. The experimental results verify that the model is a simple and accurate control-oriented small-signal discrete-time model for the digitally controlled three-phase PWM boost rectifier.

Many authors reported the decrease of performances when electric machines and electromagnetic devices were supplied by pulse width modulated (PWM) voltages. However, these statements are rarely supported by measurements performed under fair conditions. The aim of this paper is to compare the performances of a single‐phase transformer and a three‐phase permanent magnet synchronous motor (PMSM) supplied by sinusoidal and PWM voltages and to find a way to evaluate the decrease of performances when PWM voltages are applied.

In order to perform a fair comparison between performances of the tested objects supplied by sinusoidal and PWM voltages, an experimental system was built. It contains a single‐phase and a three‐phase linear rectifier for supply with sinusoidal voltages and an H‐bridge inverter and a three‐phase inverter for supply with PWM voltages. The tests and measurements were performed on a single‐phase transformer and three‐phase PMSM, where different constant loads and different modulation frequencies were used. The test conditions were identical for the supply by sinusoidal and PWM voltages. The measured data, used for the evaluation of performances, were the input and output power and the time behaviours of currents and voltages together with their THDs.

The results presented in the paper clearly show that the efficiency of the singe‐phase transformer and three‐phase PMSM decreases with the increasing level of voltage THD. To properly determine the THD of PWM voltage, the sampling frequencies above 1 MHz and special equipment are normally required. However, if the modulation frequency is not too high, also the current THD, which can be easily determined, can be used to evaluate the decrease of efficiency in the case of supply by PWM voltages.

The results presented in the paper clearly show that the efficiency of the singe‐phase transformer and three‐phase PMSM decreases with the increasing level of voltage THD.

These implementations not only generate excessive voltage levels to enhance the quality of power but also include a detailed investigating of the various modulation methods and control schemes for multilevel inverter (MLI) topologies. Reduced harmonic modulation technology is used to produce 11-level output voltage with the production of renewable energy applications. The simulation is done in the MATLAB/Simulink for 11-level symmetric MLI and is correlated with the conventional inverter design.

This paper is focused on investigating the different types of asymmetric, symmetric and hybrid topologies and control methods used for the modular multilevel inverter (MMI) operation. Classical MLI configurations are affected by performance issues such as poor power quality, uneconomic structure and low efficiency.

The variations in both carrier and reference signals and their performance are analyzed for the proposed inverter topologies. The simulation result compares unipolar and bipolar pulse-width modulation (PWM) techniques with total harmonic distortion (THD) results. The solar-fed 11-level MMI is controlled using various modulation strategies, which are connected to marine emergency lighting loads. Various modulation techniques are used to control the solar-fed 11-level MMI, which is connected to marine emergency lighting loads. The entire hardware system is controlled by using SPARTAN 3A field programmable gate array (FPGA) board and the least harmonics are obtained by improving the power quality.

The simulation result compares unipolar and bipolar PWM techniques with THD results. Various modulation techniques are used to control the solar-fed 11-level MMI, which is connected to marine emergency lighting loads. The entire hardware system is controlled by a SPARTAN 3A field programmable gate array (FPGA) board, and the power quality is improved to achieve the lowest harmonics possible.

Industrial drives require appropriate control systems for reliable and efficient performance. With synchronous reluctance machines (SynRMs) slowly replacing the most commonly used induction, switched reluctance and permanent magnet machines, it is essential that the drive and its control be properly selected for enhanced performance. But the major drawback of synchronous reluctance motor is the presence of high torque ripple as its design is characterized by large number of variables. The solutions to reduce torque ripple include design modifications, choice of proper power electronic inverter and PWM strategy. But little has been explored about the power electronic inverters suited for synchronous reluctance motor drive to minimize torque ripple inherently by obtaining a more sinusoidal voltage. The purpose of this paper is to elaborate on the potential multilevel inverter topologies applicable to SynRM drives used in solar pumping applications.

The most significant field-oriented control using maximum torque per ampere algorithm for maximizing the torque production is used for the control of SynRM. Simulation results carried out using Matlab/Simulink are presented to justify the choice of inverter and its control technique for SynRM.

The five-level inverter drive gives lesser core or iron losses in the SynRMin comparison to the three- and two-level inverters due to lower Id current ripple. The five-level inverter reduces the torque ripple of the SynRM significantly in comparison to the three- and two-level inverter fed SynRM drives. The phase disposition-PWM control method used for the inverter shows the least total harmonic distortion (THD) levels in output voltage compared with the other level shifted PWM techniques.

Among the available topologies, a fitting topology is proposed for use for the SynRM drive to have minimal THD, minimal current and torque ripple. Additionally, this paper presents various modulation techniques available for the selected drive system and reports on a suitable technique based on minimal THD of output voltage and hence minimal torque ripple.

This paper aims to investigate the common-mode voltage (CMV) issue of a three-phase four-leg voltage-source inverter. A new space vector modulation method, named as three-dimensional active zero state Pulse-width modulation (PWM) (3-D AZSPWM), is proposed to reduce the CMV level.

PWM is a general method to generate the switching signals of the power converters in order to obtain high-quality output voltages. However, the CMV produced by PWM methods has become a serious problem. 3-D AZSPWM is proposed to solve this issue. In 3-D AZSPWM, instead of using zero voltage vectors with high CMV level, appropriate complementary non-zero vectors are introduced to synthesize reference vector. The proposed method is classified into four types of AZSPWM1(a), AZSPWM1(b), AZSPWM2(a) and AZSPWM2(b) based on different complementary vectors chosen for each type. An extend software simulation using MATLAB/Simulink is performed to verify the superior performance of the proposed methods.

Compared to other reduced CMV methods, the proposed method not only reduces the CMV but also retains the positive characteristics of the three-dimensional classical space vector PWM (3-D CSVPWM).

The proposed method does not suffer from linear modulation region limitation and also does not impose additional switching loss. Furthermore, calculated output voltage harmonic distortion factor illuminates acceptable quality of output voltage produced by the proposed method.

The purpose of this paper is to focus on the machine design and control strategy of the permanent magnet synchronous generator (PMSG) system, especially utilized in variable speed applications, in order to stabilize the output voltage on the dc link over a wide speed range.

Different ac/dc power converter topologies are comparatively studied, each with an accordingly designed PMSG, so as to investigate the influence of the armature winding inductance as well as the relationship between the PMSG and power converter topologies.

Pulse width modulation (PWM) rectifier is preferable for the said application due to its good performance and controllability. Moreover, by employing the PWM rectifier, relatively large inductance of the PMSG is considered for both short-circuit current reduction and field regulation.

Field-regulating control is realized with a space vector PWM (SVPWM) rectifier, which can weaken the PMSG magnetic field during high-speed operation, while even properly enhance the field at low speed, ensuring a small change of the PMSG output voltage and a stable dc voltage.