Search results

Natural dyeing has existed in human life from past to present. Although it lost its importance after the industrial revolution, it has started to make again a name for itself today with the increase in environmental awareness. The purpose of this study is to investigate whether the Hibiscus sabdariffa L. can be used in the coloring of woolen fabrics and as a natural antibacterial agent for these fabrics.

Within the scope of the study, it was investigated whether the antibacterial activity of the Hibiscus sabdariffa L. can be transferred to woolen fabrics. In the study, woolen fabric samples were dyed with and without mordant with the help of Hibiscus sabdariffa L. extract. After the dyed fabric samples were washed and dried, their color values were measured, and antibacterial effect tests (against Staphylococcus aureus – Escherichia coli), washing and rubbing fastness tests were carried out. In addition to these, scanning electron microscopy images of dyed fabric samples were taken and Fourier transform infrared microspectroscopy analyzes were also performed.

As a result of the study, it has been determined that the antibacterial activity of the Hibiscus sabdariffa L. can be transferred to woolen fabrics without the use of any chemicals.

Natural antibacterial agent for woolen fabrics was obtained within the scope of the study without the use of chemicals.

This study aims to develop multifunctional, namely, superhydrophobic, flame-retardant and antibacterial, coatings over cotton fabric, using casein as green-based flame-retardant and silver nanoparticles as antibacterial agent by solution immersion method.

The cotton fabric is first coated with casein to make it flame-retardant. AgNPs synthesized using Cinnamomum zeylanicum bark extract is coated over the casein layer. Finally, stearic acid is used to coat the cotton to make it superhydrophobic. X-ray diffraction, transmission electron microscopy analysis and ultraviolet-visible spectroscopy are used to investigate the produced AgNPs. The as-prepared multifunctional cotton is characterized by scanning electron microscopy, energy dispersive X-ray analysis and attenuated total reflection-infrared studies. Flame test, limiting oxygen index test and thermogravimetric analyzer studies have also been performed to study the flame-retardant ability and thermal stability of treated fabric, respectively. The antibacterial effect of the coatings is evaluated by disc-diffusion technique. Water contact angle is determined to confirm the superhydrophobic nature of cotton fabric.

The outcomes of this study showed that the prepared multifunctional cotton fabric had maximum contact angle of greater than 150° with good flame retardancy, high thermal stability, greater washing durability and high antibacterial activity against the growth of Pseudomonas aeruginosa and Acinetobacter indicus. Additionally, the as-prepared superhydrophobic cotton showed an excellent oil–water separation efficiency.

The trilayered multifunctional cotton fabric has limiting washing durability up to 20 washing cycles. Treated functional fabric can be used as an antibacterial, therapeutic, water repellent and experimental protective clothing for medical, health care, home curtains and industrial and laboratory purposes.

The study brings out the robustness of this method in the development of multifunctional cotton fabrics.

The textile industry is evolving toward nanotechnology, which provides materials with self-cleaning properties. This paper aims to provide a thorough explanation of the green synthesis and mechanism of ZnO nanoparticles, with prospective applications of zinc oxide nanoparticles (ZnO NPs) in self-cleaning textiles.

This review introduces a green mechanism for the synthesis of ZnO NPs using plant extracts, their self-cleaning properties and the mechanisms of physical, chemical and biological self-cleaning actions for textile applications.

ZnO NPs are among the several nanoparticles that are beneficial for self-cleaning textiles because of their exceptional physical and chemical properties, although review publications addressing the use of ZnO NPs in textiles for self-cleaning are uncommon. These results indicate that the plant-synthesized ZnO NPs display excellent biological, physical and chemical self-cleaning properties, the mechanism of which involves photocatalysis, surface roughness and interactions between ZnO NPs and bacterial surfaces.

Nanoformulations of plant-synthesized ZnO have been reviewed to achieve promising self-cleaning textile properties and have not been reviewed earlier.

The purpose of this paper is to prepare a multifunctional nanocomposite that is slow-release and resistant to seawater corrosion and biofouling corrosion and to explore the synergistic effect between the two corrosion inhibitors.

The morphology, structure and release properties of CAP@HNTs, BTA@HNTs and CAP/BTA@HNTs were investigated by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, specific surface area analysis and UV spectrophotometry. The corrosion resistance and antimicrobial properties were investigated by electrochemical measurements and bioinhibition rate tests, and the synergistic effect between the two corrosion inhibitors was explored by X-ray photoelectron spectroscopy.

The CAP/BTA@HNTs are responsive to acidic environments and have significantly improved antibacterial and corrosion resistance compared with CAP@HNTs and BTA@HNTs. CAP and BTA have a positive synergistic effect on anticorrosion and antifouling.

Two types of inhibitors, anticorrosion and antifouling, were loaded into the same nanocontainer to prepare a slow-releasable and multifunctional nanocomposite with higher resistance to seawater corrosion and biocorrosion and to explore the synergistic effect of CAP and BTA on corrosion resistance.

This paper aims to study the combination of photochromic microcapsules, which use the ultraviolet (UV) rays for colour changing phenomena, and titanium oxide (TiO₂) nanoparticles (NPs), which block the UV rays by their photocatalytic activity in the sunlight on the cotton fabric.

The TiO₂ NPs mixed with photochromic printing paste are used for coating on cotton fabric and further curing is performed in a one-step process. The photochromic pigment printed fabric impregnated in a liquid solution is processed in a two-step process with two variables such as 1% TiO₂ and 2% TiO₂. The characterization of samples was done with a UV transmittance analyser, surface contact angle, antimicrobial test and fabric physical properties.

The UV protection of TiO₂-treated photochromic printed fabric was high and gives the ultraviolet protection factor rating of 2,000 which denotes almost maximum blocking of UV rays. The antibacterial activity of the one-step samples shows the highest 36 mm zone of inhibition (ZOI) against S. aureus (gram-positive) and 32 mm ZOI against E. coli (gram-negative) bacteria. The one-step sample shows the highest static water contact angle of 118.6° representing more hydrophobicity, whereas the untreated fabric is fully wetted (0.4°). In two-step processes, as the concentration of TiO₂ increased, the antibacterial activity, UV blocking and hydrophobicity became better.

This work achieves the multifunctional finishes by using photochromic microcapsules and NPs in a single process as a first attempt. The results inferred that one-step sample has achieved higher values in most of the tests conducted when compared to all other sample.

This study aims to investigate profoundly the protection of oil painting from deterioration using molybdenum trisulphide quantum dots (MoS3 QDs) against microbe, dirt accumulation and ultraviolet (UV) degradation.

The protection of painting against different deterioration factors necessitates the sustainable methods and advanced techniques. Scanning electron microscopy and transmission electron microscopy have been used to investigate the morphological structure of the painting and MoS3 QDs, respectively, and optical microscopy was used to examine antibacterial activity of MoS3 QDs towards different types of bacteria. To investigate the protection of painting against deterioration, the Fourier transform IR spectroscopy (FTIR) was used to investigate the paintings left in open air for a year. Chemical composition and crystal structure of MoS3 QDs have been studied using X-ray diffraction and X-ray photoelectron spectroscopy analysis, respectively.

The addition of MoS3 nanoparticles into painted coatings enhances the durability of linseed oil-based paintings toward UV ageing regarding the change in colour which confirmed by FTIR analysis. The protection of oil painting opposed to various deterioration factors was developed by involving of MoS3 QDs in the coating of the painting. Antibacterial effect of MoS3 QDs was tested against different types of bacteria such as Pseudomonas aeruginosa confirming that the MoS3 QDs involved in the coatings of oil paintings produces a high protection layer for the paintings against several microbial attacks. In addition, coatings containing MoS3 QDs reduce the accumulation of dirt on oil paintings when subjected to open air for a year.

The novel MoS3 QDs was used to form a protective and transparent coating layer for the oil painting to overcome the deterioration, displays the promising protection and can be applied for different oil paintings.

The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton fabric to improve its properties or to add some functional properties. The paper presented mostly studied research works that brought a significant surface improvement on cotton fabric.

Different previous works on surface modifications of cotton fabrics such as pilling, wrinkle and microbial resistance, hydrophobicity, cationization, flame retardancy and UV-protection characteristics were studied and their methods of modification including the main findings are well reported in this paper.

Several modification treatments on surface modification of cotton fabrics indicated an improvement in the desired properties in which the modification is needed. For instance, the pilling tendency, wrinkling, microbial degradation and UV degradation drawbacks of cotton fabric can be overcome through different modification techniques.

To the best of the author’s knowledge, there are no compressive documents that covered all the portions presented in this review. The author tried to cover the surface modifications done to improve the main properties of cotton fabric.

No comprehensive statistical assessment of publication bias has been conducted in remdesivir-based intervention research for COVID-19 patients. This study aims to examine all meta-analyses of the efficacy of remdesivir interventions in COVID-19 patients and perform a statistical assessment of publication bias.

This is an analytic study conducted to assess the impact of publication bias on the results of meta-analyses of remdesivir-based interventions in patients infected with COVID-19. All English full-text meta-analyses published in peer-reviewed journals in 2019–2021 were included. A computerized search of PubMed and Web of Science electronic databases was performed on December 24, 2021. The trim-and-fill method calculated the number of missing studies and the adjusted cumulative effect sizes.

The final analysis comprised 21 studies with 88 outcomes. The investigation revealed missing studies in 46 outcomes (52%). Seventy-six missing studies were replaced in the outcomes using the trim-and-fill procedure. The adjusted recalculated effect sizes of the 27 outcomes increased by an average of 0.04. In comparison, the adjusted effect size of 18 outcomes fell by an average of 0.036. Only 14 out of 46 outcomes with publication bias were subjected to a gray literature search (30%). To discover related research, no gray literature search was conducted in most outcomes with publication bias (n = 32; 70%). In conclusion, the reported effect estimates regarding the effect of remdesivir in COVID-19 patients are only slightly affected by publication bias and can be considered authentic. Health-care decision-makers in COVID-19 should consider current research results when making clinical decisions.

Most health decisions are based on the effect sizes revealed in meta-analyses. When deciding on remdesivir-based treatment for COVID-19 patients, therefore, the outcomes of this investigation may be of paramount importance to health policymakers, leading to better treatment strategies.

According to the results, no major publication bias and missing studies were detected on average. Therefore, the calculated effect sizes of remdesivir-based interventions on meta-analyses can be used as authentic and unbiased benchmarks by health-care decision-makers in treating patients with COVID-19.

This is the first study to examine the effect of publication bias and gray literature searches on the results of meta-analyses of treatment with COVID-19 (remdesivir).

This paper aims to extracted sericin from the cocoons of Bombyx mori silkworms, and sericin powder was applied onto drawn textured polyethylene terephthalate (PET) yarns as a spin finish. The reactivity on the surface of PET yarns was analyzed through Fourier transform infrared spectrophotometry–attenuated total reflectance (FTIR-ATR) and dyeing with methylene blue as a reactive dye. Also, investigations were conducted on the effects of sericin, citrc acid (CA) (as a crosslinking agent), and sodium hypophosphite (as a catalyst) concentrations on some properties of false-twist textured PET yarns.

A false-twist texturing machine (Scragg-Shirley minibulk, England) was used with the draw ratio of 1.05, heating temperature of 120°C, texturing speed of 100 m min⁻¹ and applied twist of 3,000 TPM. The aqueous extraction of sericin was carried out by the boiling of the raw silk in distilled water with L:R: 40:1 for 120 min. The aqueous solution was filtered with a filter paper to remove the impurities and insoluble fibroin. Finally, the sericin solution was freeze-dried to obtain the sericin powder. The sericin solution was applied on the drawn textured PET yarns using the “pad-dry-cure” method.

Sericin fixation onto the PET yarns was confirmed by FTIR-ATR. The results showed that there were no significant changes in the tensile strength, linear density, crimp contraction and crimp modulus, elongation at break and shrinkage. In contrast, a substantial increase was observed in moisture regain, vertical wicking, dye uptake and ultraviolet protection. There was also a reduction just in the electrical resistivity, in the presence of sericin.

Although sericin has been known to have numerous beneficial properties, its application in textile industry as a spin finish has not been reported yet.

The purpose of the study was to produce a healthier, convenient and traditional ready-to-eat (RTE) snack option with increased nutritional value, using spent hen meat, dietary fibre (DF) and simple technological methods. The product was designed to be stable without refrigeration and be easily adoptable by local self-help groups, rural women and youth and entrepreneurs in urban and semi-urban areas.

Conventional binder used for making snacks, i.e. rice flour was partially replaced by different sources of antioxidant DFs, i.e. oat flour (T₁ – 10%), finger millet flour (T₂ – 5%) and amaranth flour (T₃ –15%) to prepare spent hen snack sticks (SHSS). The snacks were then packaged in low density polyethylene (LDPE) pouches and evaluated for their storage stability at ambient temperature for a period of 35 days. Their physico-chemical, sensory and microbiological quality was evaluated at a regular interval of 7 days. The proximate composition of developed SHSS was compared to commercially available snack products (chakli/murukku – snacks without meat).

The fibre-enriched SHSS showed significant improvement in nutritive value, as they contained more fibre (p = 0.001) and protein (p = 0.029) than control SHSS. When compared to commercially available snack product SHSS showed three-fold significant increase in protein (p = 0.000) and ash content (p = 0.001) and only 11%–12% total fat as compared to 31% fat in the market-available product. The most acceptable treatment in terms of overall sensory quality and nutritional aspects was T₃; however, T₂ was more shelf-stable during the storage period. The study showed that fibre-enriched snacks can be stored at ambient temperature for up to 35 days without substantial loss in physico-chemical, sensory and microbial quality. Hence, substituting rice flour with DFs can lead to the development of products with better sensory attributes and improved functionality.

The simplicity of the product in terms of composition, machinery and low production costs makes it an easily adoptable one by small-scale entrepreneurs, especially those belonging to semi-urban areas.

Incorporation of spent hen meat, a relatively cheap but abundant source of protein, in RTE products can serve as an effective way to alleviate protein malnutrition, whereas addition of fibre further improves the functionality of the product. The methodology can be easily taken up by small-scale entrepreneurs and create a market for snack-based functional meat products.