Search results

This paper aims to Solar photovoltaic (PV) power can significantly impact the power system because of its intermittent nature. Hence, an accurate solar PV power forecasting model is required for appropriate power system planning.

In this paper, a long short-term memory (LSTM)-based double deep Q-learning (DDQL) neural network (NN) is proposed for forecasting solar PV power indirectly over the long-term horizon. The past solar irradiance, temperature and wind speed are used for forecasting the solar PV power for a place using the proposed forecasting model.

The LSTM-based DDQL NN reduces over- and underestimation and avoids gradient vanishing. Thus, the proposed model improves the forecasting accuracy of solar PV power using deep learning techniques (DLTs). In addition, the proposed model requires less training time and forecasts solar PV power with improved stability.

The proposed model is trained and validated for several places with different climatic patterns and seasons. The proposed model is also tested for a place with a temperate climatic pattern by constructing an experimental solar PV system. The training, validation and testing results have confirmed the practicality of the proposed solar PV power forecasting model using LSTM-based DDQL NN.

Photovoltaic (PV) systems are experiencing exponential growth due to environmental concerns, unlimited and ubiquitous solar energy, and starting-to-make-sense panel costs. Alongside designing more efficient solar panels, installing solar trackers and special circuitry for optimizing power delivery to the load according to a maximum power point tracking (MPPT) algorithm are other ways of increasing efficiency. However, it is critical for any efficiency increase to account for the power consumption of any amendments. Therefore, this paper aims to propose a novel tracker while using MPPT to boost the PV system's actual efficiency accounting for the involved costs.

The proposition is an experimental pneumatic dual-axis solar tracker using light-dependent resistor (LDR) sensors. Due to its embedded energy storage, the pneumatic tracker offers a low duty-cycle operation leading to tracking energy conservation, fewer maintenance needs and scalability potential. While MPPT assures maximum load power delivery, the solar PV's actual delivered power is calculated for the first time, accounting for the solar tracking and MPPT power costs.

The experiments' results show an increase of 37.6% in total and 35.3% in actual power production for the proposed solar tracking system compared to the fixed panel system, with an MPPT efficiency of 90%. Thus, the pneumatic tracking system offers low tracking-energy consumption and good actual power efficiency. Also, the newly proposed pneumatic stimulant can significantly simplify the tracking mechanism and benefit from several advantages that come along with it.

To the best of the authors’ knowledge, this work proposes, for the first time, a single-motor pneumatic dual-axis tracker with less implementation cost, less frequent operation switching and scalability potential, to be developed in future works. Also, the pneumatic proposal delivers high actual power efficiency for the first time to be addressed.

This study aims to investigate how environmentalism in photovoltaic (PV) substitution and nationalism in PV rivalry with the USA are associated with the trade-offs made by young consumers in Lanzhou when selecting Chinese brand portable solar power banks.

In this study, the choice-based conjoint survey was conducted to investigate mobile power bank consumers aged 18–28 in Lanzhou urban districts. A total of 2,004 valid questionnaires were collected and 1,813 sample was used in analyses. Logit and ordinary least squares regression models were run for empirical analyses.

The research results show that consumers tend to sacrifice certain levels of affordability for moderate technological capability, a reputable brand, better portability and advanced charging functions or sacrifice certain levels of technological capabilities for a moderate price. Consumers with stronger environmentalism in PV substitution tend to prioritize median price levels, larger battery capacity and better portability, while being less sensitive to brand and showing less preference for advanced charging functions. Consumers with stronger nationalism in PV rivalry tend to prioritize reasonably higher prices, bigger brands, enhanced portability, more solar panels and advanced charging functions.

This research sheds light on consumer trade-offs between price, brand, portability, technological capability and charging function. It also explores how environmentalism and nationalism sentiments are associated with consumer decision-making. These insights carry valuable policy implications for fostering product innovation, supporting brand-building initiatives for small and medium-size enterprises, promoting market competition and preventing the weaponization of consumer nationalism.

As an emerging solar power product, the portable solar power bank holds significant potential for widespread adoption as a means to drive energy transition. Within the current context, two notable sentiments have surfaced: environmentalism, which pertains to the adoption of PV technology as a substitute for conventional energy sources and nationalism, which manifests in the PV rivalry between China and the USA. This research aims to investigate consumer preference related to this emerging product, specifically focusing on its relationship with these two sentiments.

The malfunction variables of power stations are related to the areas of weather, physical structure, control and load behaviour. To predict temporal power failure is difficult due to their unpredictable characteristics. As high accuracy is normally required, the estimation of failures of short-term temporal prediction is highly difficult. This study presents a method for converting stochastic behaviour into a stable pattern, which can subsequently be used in a short-term estimator. For this conversion, K-means clustering is employed, followed by Long-Short-Term Memory (LSTM) and Gated Recurrent Unit (GRU) algorithms are used to perform the Short-term estimation. The environment, the operation and the generated signal factors are all simulated using mathematical models. Weather parameters and load samples have been collected as part of a data set. Monte-Carlo simulation using MATLAB programming has been used to conduct experimental estimation of failures. The estimated failures of the experiment are then compared with the actual system temporal failures and found to be in good match. Therefore, for any future power grid, there is a testbed ready to estimate the future failures.

This study has covered many types of solar-powered air-conditioning systems that may be used as an alternative to traditional electrically powered air-conditioning systems in order to reduce energy usage. Solar adsorption air cooling is a great alternative to traditional vapor compression air-conditioning. Solar adsorption has several advantages over traditional vapor-compression systems, including being a green cooling technology which uses solar energy to drive the cycle, using pure water as an eco-friendly HFC-free refrigerant, and being mechanically simple with only the magnetic valves as moving parts. Several advancements and breakthroughs have been developed in the area of solar adsorption air-conditioners during the previous decade. However, further study is required before this technology can be put into practise. As a result, this book chapter highlights current research that adds to the understanding of solar adsorption air-conditioning technologies, with a focus on practical research. These systems have the potential to become the next iteration of air-conditioning systems, with the benefit of lowering energy usage while using plentiful solar energy supplies to supply the cooling demand.

The purpose of this paper is to propose a novel maximum power point track (MPPT) controller for a type of solar quad-copter to solve the problem of tracking the maximum power point (MPP) when it works in nonuniform environment conditions.

The influence of uniform and nonuniform illumination and different temperatures results in the output characteristics of the solar array arising multiple local MPPs. To track the global MPP of the solar array on the designed solar quadcopter, a type of MPPT controller based on an improved pigeon-inspired optimization (PIO) algorithm is proposed.

A novel type of MPPT controller based on extended search PIO (ESPIO) algorithm, called ESPIO–MPPT controller, is introduced emphatically, which is used to extend the solar quadcopter’s flight time. The simulation experiments show that the ESPIO–MPPT controller can find the global MPP (GMPP) with smaller amplitudes of oscillation and less time cost.

The proposed solar quadcopter with ESPIO–MPPT controller has satisfactory flight performance which can greatly broaden its mission scope.

A type of efficient MPPT algorithm based on ESPIO is proposed for GMPP tracking of solar quadcopters in nonuniform environment conditions.

This paper aims to analyze energy and exergy analysis of solar-based intercooled and reheated gas turbine (GT) trigeneration cycle using parabolic trough solar collectors (PTC) with the use of MATLAB 2018.

In the first section of this paper, the solar-based GT is validated with the reference paper. According to the reference paper, the solar field is comprising 30 modules in series and 35 modules in parallel series, where a total of 1,050 modules of PTC are taken into consideration. In the second part of this paper, the hybridization of the solar, GT trigeneration cycle is analyzed and optimized. In the last section of this paper, the hybridization of solar, intercooled and reheated GT trigeneration systems is examined and compared.

The results examined the first section, the power produced by the cycle will be 37.34 MW at 0.5270 kg/s mass flow rate of the natural gas consumption and the efficiencies of energy and exergy will be 38.34% and 39.76%, respectively. The results examined in the second section, the power produced by the cycle will be 38.4 MW at 0.5270 kg/s mass flow rate of the natural gas consumption and accordingly the efficiency of energy and exergy is found to be 40.011% and 41.763%. Where in the last section, the power produced by the cycle will be 41.43 MW at 0.5270 kg/s mass flow rate of the natural gas consumption and the energy and exergy efficiencies will be 39.76% and 40.924%, respectively.

The author confirms that this study is original and has neither been published elsewhere nor it is currently under consideration for publication elsewhere.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

The main purpose of this controller is to carryout irrigation by the farmers with renewable energy resources.

The proposed design includes the Deep learning based intelligent stand-alone energy management system used for irrigation purpose. The deep algorithm applied here is Radial basis function neural network which tracks the maximum power, maintains the battery as well as load system.

The Radial Basis Function Neural Network algorithm is used for carrying out the training process. In comparison with other conventional algorithms, this algorithm outperforms by higher efficiency and lower tracking time without oscillation.

It is little complex to implement the hardware setup of neural network in terms of training process but the work is under progress.

The practical hardware implementation is under progress.

If controller are implemented in a real-time environment, definitely it helps the human-less farming and irrigation process.

If this system is implemented in real-time environment, every farmer gets benefitted.

This paper aims to design an AI-based drone that can facilitate the complicated and time-intensive control process for detecting healthy and defective solar panels. Today, the use of solar panels is becoming widespread, and control problems are increasing. Physical control of the solar panels is critical in obtaining electrical power. Controlling solar panel power plants and rooftop panel applications installed in large areas can be difficult and time-consuming. Therefore, this paper designs a system that aims to panel detection.

This paper designed a low-cost AI-based unmanned aerial vehicle to reduce the difficulty of the control process. Convolutional neural network based AI models were developed to classify solar panels as damaged, dusty and normal. Two approaches to the solar panel detection model were adopted: Approach 1 and Approach 2.

The training was conducted with YOLOv5, YOLOv6 and YOLOv8 models in Approach 1. The best F1 score was 81% at 150 epochs with YOLOv5m. In total, 87% and 89% of the best F1 score and mAP values were obtained with the YOLOv5s model at 100 epochs in Approach 2 as a proposed method. The best models at Approaches 1 and 2 were used with a developed AI-based drone in the real-time test application.

The AI-based low-cost solar panel detection drone was developed with an original data set of 1,100 images. A detailed comparative analysis of YOLOv5, YOLOv6 and YOLOv8 models regarding performance metrics was realized. Gaussian, salt-pepper noise addition and wavelet transform noise removal preprocessing techniques were applied to the created data set under the proposed method. The proposed method demonstrated expressive and remarkable performance in panel detection applications.