Search results

This study aims on a broad review of Concrete's Rheological Properties. The Concrete is a commonly used engineering material because of its exquisite mechanical interpretation, but the addition of constituent amounts has significant effects on the concrete’s fresh properties. The workability of the concrete mixture is a short-term property, but it is anticipated to affect the concrete’s long-term property.

In this review, the concrete and workability definition; concrete’s rheology models like Bingham model, thixotropy model, H-B model and modified Bingham model; obtained rheological parameters of concrete; the effect of constituent’s rheological properties, which includes cement and aggregates; and the concrete’s rheological properties such as consistency, mobility, compatibility, workability and stability were studied in detail.

Also, this review study has detailed the constituents and concrete’s rheological properties effects. Moreover, it exhibits the relationship between yield stress and plastic viscosity in concrete’s rheological behavior. Hence, several methods have been reviewed, and performance has been noted. In that, the abrasion resistance concrete has attained the maximum compressive strength of 73.6 Mpa; the thixotropy approach has gained the lowest plastic viscosity at 22 Pa.s; and the model coaxial cylinder has recorded the lowest stress rate at 8 Pa.

This paper especially describes the possible strategies to constrain improper prediction of concrete’s rheological properties that make the workability and rheological behavior prediction simpler and more accurate. From this, future guidelines can afford for prediction of concrete rheological behavior by implementing novel enhancing numerical techniques and exploring the finest process to evaluate the workability.

A comparison of electric and viscosity percolation threshold is crucial from the scientific and technical points of view to understand the features and capabilities of heterogeneous graphene composite materials and properly select the functional phase volume. Therefore, the purpose of this paper is to present the analysis of the electrical and rheological percolation thresholds in the polymer–graphene screen printing pastes and the analysis of the relation between these two parameters.

In the paper, the properties of polymer-based pastes with graphene nanoplatelets were tested: paste viscosity and printed layers conductivity. The tests of pastes with different filler content allowed to determine both the electrical and rheological percolation thresholds using power law, according to Kirkpatrick’s percolation model.

The electrical percolation threshold for graphene nanoplatelets (GNPs) in the composite was 0.74 Vol.% when the rheological percolation threshold is observed to be at 1.00 Vol.% of nanoplatelets. The percolation threshold values calculated using the Kirkpatrick’s percolation model were 0.87 and 0.5 Vol.% of GNPs in the paste for electrical and rheological percolation thresholds, respectively.

Recently, GNPs are becoming more popular as the material of the functional phase in screen printing heterophase materials, because of their unique mechanical and electrical properties. However, till date no research presented in the literature is related to the direct comparison of both the electrical and rheological percolation thresholds. Such analysis is important for the optimization of the printing process toward the highest quality of printed conductive paths, and finally the best electrical properties.

The purpose of this paper is to experimentally investigate the effect of aluminium oxide (Al₂O₃) nanoparticles on gear oil (SAE EP 90) as a lubricant in heavy earth moving machinery (HEMM).

Particle size distribution, viscosity, density, stability and other rheological properties have been measured. The variations in rheological properties with varying nanoparticle volume fraction and temperature have been investigated at atmospheric pressure over a temperature range of 15-40°C. Classical as well as modified Krieger – Dougherty models have been used for finding out viscosity variation and a new empirical model has been presented.

Dynamic light scattering data confirm the presence of large agglomeration of about 5.5 times of primary nanoparticles in nanofluid. Nanofluid starts behaving as a non-Newtonian fluid with increasing nanoparticle volume fraction. Viscosity of nanofluid is enhanced by 1.7 times of base fluid with 2 per cent volume fraction of Al₂O₃ nanoparticles, while it significantly decreases with increase in temperature. The stability of nanofluid decreases with increase in nanoparticle volume fraction due to settling down of nanoparticles. It has also been observed that shear thinning increases with increasing nanoparticle volume fraction.

It is expected that these findings will contribute towards the improvement in rheological and thermal properties of the conventional lubricants used in HEMM. The outcome may help the designers, researchers and manufacturers of the HEMM.

Most of the previous research in this field is confined with base fluid as water, ethylene glycol, transformer oil, etc. Gear oil in HEMM performs under high mechanical and thermal load. The Al₂O₃/gear oil nanofluid is expected to have better cooling and lubrication properties.

The purpose of this paper is to characterize and understand the effects of polymer binder, thixotropic agent, solvent and organic medium content on the rheological properties of silver pastes for screen printing front electrode films of solar cells.

Dispersions of silver particles (surface modified with oleic acid) in ethyl cellulose (EC) polymer solutions with and without thixotropic agent were prepared, and yield stress values were measured by setting shear stress to characterize the inter-particle interaction strength of pastes. Steady-state flow, three interval thixotropy shear test and oscillatory measurements were conducted to study the effect of EC polymer and thixotropic agent on viscosity, structure rebuilding and viscoelastic properties of electrode pastes. The effect of solvent was studied by investigating the steady viscosity of cellulose acetate butyrate (CAB) polymer solutions and Ag dispersions.

Weak flocculation network of silver particles was produced because of depletion flocculation. Besides the interaction between thixotropic agent micelles, EC polymer also has a significant interaction with thixotropic agent. Merely increasing EC polymer or thixotropic agent content is not the best way to prevent the layer printed from laying down. The effect of solvent on the viscosity of paste is mainly attributed to the difference of hydromechanics radius and configuration of CAB polymer in solvents. With the increase of organic medium content, the properties of electrode pastes were converted from rigidity to flexibility.

It is still a challenge to obtain high-quality front electrode films for crystalline silicon solar cells by screen printing, because of the difficulty in reducing shadowing losses while ensuring a low series resistance and high filling factor. The paste rheological properties are the key properties related to the paste’s passing ability through the meshes and resistance of paste spreading on the substrate. Organic medium as an important component of the paste is acknowledged to be used to tailor the paste’s rheological properties and have a great role in screen printing.

This study aims to present the results of an experimental evaluation of low (M30), mid (M40) and high (M50) grade self-compacting concrete (SCC) with three nominal maximum aggregate sizes (NMAS), namely, 20 mm, 16 mm and 12.5 mm, with Bailey gradation (BG) in comparison with Indian standard gradation (ISG).

This study was conducted in a laboratory by testing the characteristics of fresh and hardened properties of self-compacting concrete.

Rheological and mechanical properties of SCC were evaluated in detail and according to the results, a concrete sample containing lower NMAS with BG demonstrated improvement in modulus of elasticity and compressive strength, while improving the rheological properties as well. Meanwhile, SCC demonstrated poor performance in split tensile and flexural strengths with lower NMAS gradations and a direct correlation was evident as the increase in NMAS caused an increase in the strength and vice-versa.

Upon comparison of BG with ISG, it was revealed that BG mixes succeeded to demonstrate superior performance. From the material optimization, rheological and mechanical performance study, it is recommended that BG with NMAS 16 mm can be used for conventional SCC.

The rheological properties of coating suspensions containing a blend of clay and CaCO3 as a pigment have been evaluated at 22°C, using a rheometer with shear rates from 0.5 to 100rpm. The state of dispersion of the pigment, the structure viscosity of the suspension as a result of pigment‐pigment or pigment‐binder interactions, and its behaviour by changing the solid content and ionic strength, were limited from the examination of the flow curves. The flow parameters for each suspension were calculated. The results showed that changes in solid content and ionic strength by the addition of divalent simple electrolyte (CaCl2) and pH level have a more profound effect on the flow parameters than that obtained by the addition of monovalent simple electrolyte (NaCl) or polyelectrolyte soluble polymers (CMC) with different degrees of substitution. The type of acid used to adjust the pH of the suspension also has a great influence on the flow parameters.

The purpose of this paper is to develop a kind of novel and high‐performance rheological additive, an eco‐friendly composite of anatase nano‐TiO₂ particles and xanthan gum (NTX), for interior wall coatings.

NTX was prepared through heating and refluxing the mixture of TiO₂ hydrosol and xanthan gum, and five interior wall coating samples were fabricated with different NTX contents. The morphology of nano‐TiO₂ hydrosol and NTX were characterised with TEM, and the stability and rheological properties of these coating samples were studied.

TEM images showed a core‐shell structure of NTX, and that nano‐TiO₂ particles in it were encapsulated by xanthan gum, which was anticipated to weaken Van der Waals force among nano‐TiO₂ particles thus preventing the aggregation of nano‐particles. All of the five coating samples were found to be non‐Newtonian pseudo‐plastic fluid, and showed excellent stability and thixotropic property.

This paper focused on the preparation, the characterisation of NTX additive and the study of the rheological behaviours of the coating samples with NTX. Some other aspects, such as coating durability, photocatalytic ability and film properties, will be studied in the future.

It was proven that NTX was an effective eco‐friendly rheological additive for interior wall coatings. Consequently, this paper threw light on developing eco‐friendly interior wall coatings.

A kind of novel and effective rheological additive was developed for interior wall coatings in the study reported in the paper. A method was also developed to introduce functional nano‐particles into coating in a good dispersion state.

This work describes the fabrication of composite nanogrease based on carbon nanotubes (CNTs) as an additive at different volume concentrations 0, 0.5, 1, 2 and 3 Wt.% and investigates the correlation between CNTs and grease rheological behaviour. In addition, study the influence of shear thinning rate at various temperatures and investigates the thermal conductivity of nanogrease. The results demonstrated that grease behaves like a Newtonian viscoelastic material with a narrow linear domain. The thermal conductivity of nanogrease was enhanced by about 31.58 per cent, and the thermal and mechanical stabilities improved. Moreover, the apparent viscosity and dropping point increased by about 93 and 27 per cent, respectively.

Grease was dissolved in chloroform (10 Wt.%), at 25°C for 1 h. In parallel, functionalized CNTs with different volume concentrations (0.5, 1, 2 and 3 Wt.%) were dispersed in N,N-dimethylformamide; the dispersion was stirred for 15 min, and then sonicated (40 kHz, 150 W) for 30 min. Grease solution was then added to the CNTs. The nanofluid was magnetically stirred for 15 min and then sonicated for 2 h. This ensured uniform dispersion of nanoparticles in the base fluid.

Inexpensive and simple fabrication of nanogrease. Thermal conductivity of nanogrease was typically enhanced compared to other reported studies. Apparent viscosity and dropping point increases with the increase the volume concentration.

This work describes the inexpensive and simple fabrication of nanogrease for improving properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

This paper aims to express in detail the rheological, morphological and thermal properties of unpigmented and pigmented styrene-butadiene rubber composites with new prepared inorganic pigment based on kaolin covered with a thin layer of calcium and magnesium oxides or mixed oxide of both together. These new pigments combine the properties of both their constituents (kaolin and metal oxides), which are a new trend in inorganic pigments called core-shell pigments. The pigments used for comparison are kaolin (K), CaO/kaolin (CaO/K), MgO/kaolin (MgO/K) and CaO.MgO/kaolin (CaO.MgO/K).

The different pigments were characterized using different analytical and spectrophotometric techniques, such as X-ray diffraction, scanning electron microscopy/energy dispersive X-ray and transmission electron microscopy, while rubber vulcanizates' rheological, morphological, swelling and thermal properties were examined using different standard and instrumental testing and methods.

The study revealed that there is a significant effect of the new prepared pigments on SBR properties, where the optimum pigment loading was 40 phr for CaO/kaolin, while it was 2.5 phr for MgO/kaolin. Studying the effect of different ratios of oxides on kaolin (5, 10 and 20 per cent), different loadings of these pigments ranging between 2.5 and 40 phr were done for each pigment. These modified kaolin or core-shell metal oxide/kaolin pigments imparted new and improved reinforcing properties to SBR vulcanizates.

No research limitations were found.

Core-shell MgO/kaolin pigments are eco-friendly and can replace other expensive pigments that are usually used as fillers in the rubber industry with less expenses and comparable efficiency.

These new pigments are cheap and efficient and can be used in different fields other than rubber.

This study aims to investigate rheological and extrusion behavior of thermosetting epoxy resins, which to find the universal property and printing parameters for extrusion-based rapid prototyping applications.

The thickener proportion greatly influences its viscosity and rheological behavior and therefore plays an important role in the shape of the cross-section of the extrudate.

A pseudoplastic (shear-thinning) is a basic requirement for obtaining extruded lines with plump cross-sections. In addition to the effects of the rheological behavior of the composite, shape maintenance and its wettability on the substrate, the cross-sectional geometry of the extrudate is also strongly affected by printing process parameters including the extrusion nozzle height, nozzle moving speed, extrusion rate and critical nozzle height. Proper combinations of these process parameters are necessary to obtain single-line extrudates with plump cross-sections and 3-D objects with dimensional accuracy, uniform wall thickness, good wall uprightness and no wall slumping. Formulas and procedures for determining these extrusion parameters are proposed and demonstrated in experiments.

The results obtained have been explained in terms of the interactions among the rheological properties of the composite, the shear rate imposed on the composite during extrusion, the wettability of the composite on the substrate and the shape maintenance of the composite during extrusion.