Search results

This study aims to provide an insight into the relationship between design parameters and thermal performance of plate fin heat sinks (PFHSs) incorporating longitudinal vortex generators (VGs) inside a PFHS channel.

A computational fluid dynamics model of a delta winglet pair VG mounted inside a PFHS geometry is detailed, and the model is validated by comparison with experimental data. The validated model is used to perform a virtual design of experiments study of the heat sink with bottom plate and vertical plate mounted VGs. Data from this study is used to regress a response surface enabling the influence of each of the assessed design variables on thermal performance and flow resistance to be determined.

The results of this study show that the thermal hydraulic performances of a PFHS with bottom plate mounted VG and vertical plate fin mounted VG are, respectively, 1.12 and 1.17 times higher than the baseline PFHS. Further, the performance variation of the heat sink with VG, relative to delta winglet’s arrangement (common flow up and common flow down), trailing edge gap length and Reynolds number were also evaluated and reported.

For the first time, performance characteristics of delta winglet VGs mounted inside the PFHS are evaluated against different design variables and a polynomial regression model is developed. The developed regression model and computed results can be used to design high performance PFHSs mounted with delta winglet VGs.

The purpose of this paper is to present a porous medium model for forced air convection in pin/plate‐fin heat sinks subjected to non‐uniform heating of a hot gas impinging jet. Parametric studies are performed to provide comparisons between inline square pin‐fin and plate‐fin heat sinks in terms of overall and local thermal performance for a fixed pressure drop.

Heat conduction in substrates is coupled with forced convection in the pin/plate‐fin flow channel. The forced convection is considered by employing the non‐Darcy model for fluid flow and the thermal non‐equilibrium model for heat transfer. A series of experiments is performed to validate the model for both the pin‐fin and plate‐fin heat sinks.

The present porous medium model is capable of capturing the presence of lateral heat spreading in the plate‐fins and the absence of lateral heat spreading in the pin‐fins under non‐uniform thermal boundary condition, attributing to the adoption of the orthotropic effective thermal conductivity for the solid phase in the energy equation. The present results show that the inline square pin‐fin heat sink has topological advantage over the plate‐fin heat sink, although the heat spreading through the plate‐fins on reducing the peak temperature on the substrate is pronounced.

This paper reports an original research on theoretical modeling of forced convection in pin/plate‐fin heat sinks subjected to the non‐uniform heating of an impinging jet.

The purpose of the study is to optimise the cross-sectional shape of passively cooled horizontally mounted pin-fin heat sink for higher cooling performance and lower material usage.

Multi-objective shape optimisation technique is used to design the heat sink fins. Non-dominated sorting genetic algorithm (NSGA-II) is combined with a geometric module to develop the shape optimiser. High-fidelity computational fluid dynamics (CFD) is used to evaluate the design objectives. Separate optimisations are carried out to design the shape of bottom row fins and middle row fins of a pin-fin heat sink. Finally, a computational validation was conducted by generating a three-dimensional pin-fin heat sink using optimised fin cross sections and comparing its performance against the circular pin-fin heat sink with the same inter-fin spacing value.

Heat sink with optimised fin cross sections has 1.6% higher cooling effectiveness than circular pin-fin heat sink of same material volume, and has 10.3% higher cooling effectiveness than the pin-fin heat sink of same characteristics fin dimension. The special geometric features of optimised fins that resulted in superior performance are highlighted. Further, Pareto-optimal fronts for this multi-objective optimisation problem are obtained for different fin design scenarios.

For the first time, passively cooled heat sink’s cross-sectional shapes are optimised for different spatial arrangements, using NSGA-II-based shape optimiser, which makes use of CFD solver to evaluate the design objectives. The optimised, high-performance shapes will find direct application to cool power electronic equipment.

The purpose of this paper is to examine the thermal and dynamic performance of the plate-fin heat sink fitted with a shield in the bypass.

The governing equations were solved using the finite volume method based on the SIMPLE algorithm. The k-ω Shear Stress Transport was used to model turbulence. The thermal and dynamic results were presented in term of average Nusselt number and friction factor, respectively. The effect of the height (Hs=6, 10 and 13) and the position (X=0, 1/3, 1/2, 2/3 and 3/4) of the shield was studied for a Reynolds number ranging from 2×103 to 12×103 and compared with a heat sink without shield. To evaluate the performance of different heat sink geometries, the efficiency was presented and discussed.

By adding a shield in the bypass, a greater amount of air is injected between the heat sink fins, which improves the heat transfer (advantage) of the one part, and increases the friction on the other hand (disadvantage). The efficiency of the heat sink varies inversely proportional with the Reynolds number.

The originality of this work is the method for enhancement of heat transfer.

The purpose of this paper is to present a way to determine the optimum values of design parameters in a cylindrical heat sink with branched fins. Investigations into the effect of design parameters, such as the number of fins, length of fin, height of fin and outer diameter of the heat sink on heat transfer are reported here. In this analysis, branch angle (α = 10°) is considered.

The Taguchi method, a powerful tool to design optimization, is applied for the tests and standard L9 orthogonal array with three factors, and three levels for each factor are selected. Nine test samples are analyzed in which the total heat transfer rate for each test sample is found. Contribution ratios for each parameter are also found. The results obtained from this analysis are used to find the optimum design parameter values relating to the heat sink performance.

The optimum design parameters are analyzed in this paper. The reliability of the optimum test samples is verified. Also, the variation of the average heat transfer rate of optimum sample is reported when it is compared with the reference sample.

Effective design of a cylindrical heat sink has been reported for cooling light-emitting diode (LED) lights, which have recently attracted the attention of the illumination industry. In this analysis, the contribution ratios have an important role to set out the performance characteristics of a heat sink.

The reliability of the optimum test samples is verified. Also, the variation of the average heat transfer rate of optimum sample is reported when it is compared with the reference sample.

With development of the modern electronic and mechanical devices, cooling requirement has become a serious challenge. Innovative heat transfer enhancement methods are generally accompanied by undesirable increase of pressure drop and consequently a pumping power penalty. The current study aims to present a novel and easy method to manufacture a mini heat sink using porous fins and magnetite nanofluid (Fe₃O₄/water) as the coolant for simultaneous heat transfer enhancement and pressure drop reduction.

A three-dimensional numerical study is carried out to evaluate the thermal and hydrodynamic performance of the mini heat sink at different volume fractions, porosities and Reynolds numbers, using finite volume method. The solver specifications for discretization of the domain involve the SIMPLE, second-order upwind and second order for pressure, momentum and energy, respectively.

Results show that porous fins have a favorable effect on both heat transfer and pressure drop compared to solid fins. Creation of a virtual velocity slip on the channel-fin interfaces similar to the micro scale conditions and the flow permeation into the porous fins are the main mechanisms of pressure drop reduction. On the other hand, the heat transfer enhancement is attributed to the increase of the solid-fluid contact area and the improvement of the flow mixing because of the flow permeation into the porous fins. An optimal porosity for maximum convective heat transfer enhancement is obtained as a function of Reynolds number. However, taking both pressure drop and heat transfer effects into account, the overall heat sink performance is shown to be improved at high of Reynolds numbers, volume fractions and fin porosities.

Thermal radiation and gravity effects are ignored, and thermal equilibrium is assumed between solid and fluid phases.

A maximum of 32 per cent increase of convective heat transfer is achieved along with a maximum of 33 per cent reduction in the pressure drop using porous fins and ferrofluid in heat sink.

The purpose of this study is to use an electric field technique to design novel heat sinks capable of rejecting as much heat as possible in a limited space. Configuration of electrodes in this study can be used for increasing the efficiency of heat sinks.

This study investigates a novel electrohydrodynamic (EHD)-based heat sink for thermal management of electronic devices and thermal systems. The significant part of designing an EHD heat sink is the arrangement of the electrodes. A numerical simulation is performed for a heat sink with two parallel plates to determine the optimum dimensional configuration of electrodes. The upper plate of this heat sink is the ground electrode with a constant atmosphere temperature, and the lower plate of it with flush-mounted high-voltage electrodes has uniform heat flux.

The results show that heat transfer changes by the size of the vortices and the number of them. These vortices are emerged by the electric field, and the number of them increases with increasing the number of electrodes. The interaction of vortices size and number leads to having the lowest average temperature in the optimum case by two high voltage electrodes with widths of 7.5 mm and a 17.5 mm gap between them. In comparison with the case without the electric field, with increasing the applied voltage to 30 kV, the efficiency of this EHD heat sink increases up to 37%.

Improvements in electrical equipment make them more compact with higher heat fluxes. Hence, the amount of heat to be dissipated per area increases and needs thermal management to operate at their design temperatures. Therefore, to improve the performance and life span of electronic components and increase their efficiency, it is necessary to design heat sinks to decrease their maximum (peak) temperature.

This study aims to examine the effect of a combination of hybrid pin-fin patterns on a heat sink's performance using numerical techniques. Also, flow characteristics have been studied, such as secondary flow formation and flow-wall interaction.

In this study, the effect of hybrid arrangements of elliptical and hexagonal pin-fins with different distribution percentages on flow characteristics and performance evaluation criteria in laminar flow was investigated. Ansys-Fluent software solves the governing equations using the finite volume method. Also, the accuracy of obtained results was compared with the experimental results of other similar papers.

The results of this study highlighted that hybrid arrangements show higher overall performance than single pin-fin patterns. Among the hybrid arrangements, case 3 has the highest values of performance evaluation criteria, that is, 1.84 in Re = 900. The results revealed that, with the instantaneous change in the pattern from elliptic to hexagonal, the secondary flow increases in the cross-sectional area of the channels, and the maximum velocity in the cross-section of the channel increases. The important advantages of case 3 are its highest overall performance and a lower chip surface temperature of up to about 2% than other hybrid patterns.

Prior research has shown that in the single pin-fin pattern, the cooling power at the end of the heat sink decreases with increasing fluid temperature. Also, a review of previous studies showed that existing papers had not investigated hybrid pin-fin patterns by considering the effect of changing distribution percentages on overall performance, which is the aim of this paper.

The purpose of this paper is to improve the overall heat transfer performance and the temperature uniformity of the heat sink and to explore the effects of the jet Reynolds number and the nanoparticle volume fraction of the nanofluids on the flow and heat transfer performance.

A heat sink with discontinuous arc protrusions in the wall jet region is proposed for confined slot jet impingement. A sloping upper cover plate is added to improve the heat transfer effect in this area. An Al₂O₃–water nanofluid is selected as the working fluid of the jet for better heat transfer. The Standard k-e turbulence model is used for numerical calculation. The key structural parameters of the heat sink are optimized by the response surface method and a genetic algorithm. The effects of the jet Reynolds number (Re) and the nanofluid concentration (ϕ) on the flow and heat transfer performance of the optimized heat sink are investigated.

The average Nusselt number of the optimal heat sink is 8.2% higher and the friction resistance is 5.9% lower than that of the initial flat plate heat sink when ϕ = 0.02 and Re = 8,000. The discontinuous arc protrusions and the sloping upper cover plate substantially enhance the heat transfer in the later stage of jet development, improving the temperature uniformity of the heat sink. The maximum temperature difference of the optimal heat sink is 28.1% lower than that of the flat plate heat sink at the same nozzle height. As the jet Reynolds number and the nanofluid particle concentration increase, the Nusselt number of the optimized heat sink and the friction coefficients increase, resulting in a decrease in the evaluation coefficient. However, the overall temperature uniformity of the heat sink is improved under all conditions.

The novel heat sink structure provides a new way to enhance the heat transfer and temperature uniformity of confined slot jet impingement. The flow and heat transfer performance of the heat sink impinged by confined slot jet of nanofluids are obtained. The combination of response surface method and genetic algorithm can be applied to the multi-objective optimization of heat resistance and flow resistance of heat sink.

High performance aluminium nitride water cooled heat sinks were fabricated and characterized. A variety of fabrication processes were employed to meet different cooling requirements. They include laser cut microchannel coolers for chip and multichip heat sinks as well as dry pressed pin fin heat sinks for power electronics. Thermal simulation was used to optimize the heat sink design.