Search results

The purpose of this paper is to present a way to determine the optimum values of design parameters in a cylindrical heat sink with branched fins. Investigations into the effect of design parameters, such as the number of fins, length of fin, height of fin and outer diameter of the heat sink on heat transfer are reported here. In this analysis, branch angle (α = 10°) is considered.

The Taguchi method, a powerful tool to design optimization, is applied for the tests and standard L9 orthogonal array with three factors, and three levels for each factor are selected. Nine test samples are analyzed in which the total heat transfer rate for each test sample is found. Contribution ratios for each parameter are also found. The results obtained from this analysis are used to find the optimum design parameter values relating to the heat sink performance.

The optimum design parameters are analyzed in this paper. The reliability of the optimum test samples is verified. Also, the variation of the average heat transfer rate of optimum sample is reported when it is compared with the reference sample.

Effective design of a cylindrical heat sink has been reported for cooling light-emitting diode (LED) lights, which have recently attracted the attention of the illumination industry. In this analysis, the contribution ratios have an important role to set out the performance characteristics of a heat sink.

The reliability of the optimum test samples is verified. Also, the variation of the average heat transfer rate of optimum sample is reported when it is compared with the reference sample.

Efficient thermal management of central processing unit (CPU) cooling systems is vital in the context of advancing information technology and the demand for enhanced data processing speeds. This study aims to explore the thermal performance of a CPU cooling setup using a cylindrical porous metal foam heat sink.

Nanofluid flow through the metal foam is simulated using the Darcy–Brinkman–Forschheimer equation, accounting for magnetic field effects. The temperature distribution is modeled through the local thermal equilibrium equation, considering viscous dissipation. The problem’s governing partial differential equations are solved using the similarity method. The CPU’s hot surface serves as a solid wall, with nanofluid entering the heat sink as an impinging jet. Verification of the numerical results involves comparison with existing research, demonstrating strong agreement across numerical, analytical and experimental findings. Ansys Fluent® software is used to assess temperature, velocity and streamlines, yielding satisfactory results from an engineering standpoint.

Investigating critical parameters such as Darcy number (10⁻⁴ ≤ Da_D ≤ 10⁻²), aspect ratio (0.5 ≤ H/D ≤ 1.5), Reynolds number (5 ≤ Re_D,bf ≤ 3500), Eckert number (0 ≤ EC_bf ≤ 0.1) , porosity (0.85 ≤ ε ≤ 0.95), Hartmann number (0 ≤ Ha_D,bf ≤ 300) and the volume fraction of nanofluid (0 ≤ φ ≤ 0.1) reveals their impact on fluid flow and heat sink performance. Notably, Nusselt number will reduce 45%, rise 19.2%, decrease 14.1%, and decrease 0.15% for Reynolds numbers of 600, with rising porosity from 0.85 to 0.95, Darcy numbers from 10⁻⁴ to 10⁻², Eckert numbers from 0 to 0.1, and Hartman numbers from 0 to 300.

Despite notable progress in studying thermal management in CPU cooling systems using porous media and nanofluids, there are still significant gaps in the existing literature. First, few studies have considered the Darcy–Brinkman–Forchheimer equation, which accounts for non-Darcy effects and the flow and geometric interactions between coolant and porous medium. The influence of viscous dissipation on heat transfer in this specific geometry has also been largely overlooked. Additionally, while nanofluids and impinging jets have demonstrated potential in enhancing thermal performance, their utilization within porous media remains underexplored. Furthermore, the unique thermal and structural characteristics of porous media, along with the incorporation of a magnetic field, have not been fully investigated in this particular configuration. Consequently, this study aims to address these literature gaps and introduce novel advancements in analytical modeling, non-Darcy flow, viscous dissipation, nanofluid utilization, impinging jets, porous media characteristics and the impact of a magnetic field. These contributions hold promising prospects for improving CPU cooling system thermal management and have broader implications across various applications in the field.

The purpose of this paper is to optimize the configuration of a heat sink with phase change material for improving the cooling performance of light emitting diodes (LED).

A numerical three-dimensional time-dependent model is developed with COMSOL Multiphysics to simulate the phase change material melting process during both the charging and discharging period.

The model is validated with previously published works. It found a good agreement. The difference between filled cavities with phase change materials (PCM) and alternate cavities air-PCM is discussed. The last-mentioned showed a good ability for reducing the junction temperature during the melting time. Three cases of this configuration having the same total volume of PCM but a different number of cavities are compared. The case of ten fins with five PCM cavities is preferred because it permit a reduction of 21 per cent of the junction temperature with an enhancement ratio of 2:4. The performance of this case under different power input is verified.

The use of alternate air-PCM cavities of the heat sink. The use of PCM in LED to delay the peak temperature in the case of thermal shock (for example, damage of fan) An amount of energy is stored in the LED and it is evacuated to the ambient of the accommodation by the cycle of charging and discharging established (1,765 Joule stored and released each 13 min with 1 LED chip of 5 W).

With development of the modern electronic and mechanical devices, cooling requirement has become a serious challenge. Innovative heat transfer enhancement methods are generally accompanied by undesirable increase of pressure drop and consequently a pumping power penalty. The current study aims to present a novel and easy method to manufacture a mini heat sink using porous fins and magnetite nanofluid (Fe₃O₄/water) as the coolant for simultaneous heat transfer enhancement and pressure drop reduction.

A three-dimensional numerical study is carried out to evaluate the thermal and hydrodynamic performance of the mini heat sink at different volume fractions, porosities and Reynolds numbers, using finite volume method. The solver specifications for discretization of the domain involve the SIMPLE, second-order upwind and second order for pressure, momentum and energy, respectively.

Results show that porous fins have a favorable effect on both heat transfer and pressure drop compared to solid fins. Creation of a virtual velocity slip on the channel-fin interfaces similar to the micro scale conditions and the flow permeation into the porous fins are the main mechanisms of pressure drop reduction. On the other hand, the heat transfer enhancement is attributed to the increase of the solid-fluid contact area and the improvement of the flow mixing because of the flow permeation into the porous fins. An optimal porosity for maximum convective heat transfer enhancement is obtained as a function of Reynolds number. However, taking both pressure drop and heat transfer effects into account, the overall heat sink performance is shown to be improved at high of Reynolds numbers, volume fractions and fin porosities.

Thermal radiation and gravity effects are ignored, and thermal equilibrium is assumed between solid and fluid phases.

A maximum of 32 per cent increase of convective heat transfer is achieved along with a maximum of 33 per cent reduction in the pressure drop using porous fins and ferrofluid in heat sink.

The purpose of this paper is to carry out an in-depth analysis of heat dissipation performance by natural convection phenomenon inside light-emitting diode (LED) lamps containing hot pin-fins because of its significant industrial applications.

The problem is assimilated to heat transfer inside air-filled rectangular cavity with various governing parameters appraised in ranges interesting engineering application and scientific research. The lattice Boltzmann method is used to predict the dynamic and thermal behaviors. Effects of monitoring parameters such as Rayleigh number Ra (10³-10⁶), fin length (0-0.25) and its position, pin-fins number (1-8), the tilting-angle (0-180°) and cavity aspect ratio Ar (0.25-4) are carried out.

The rising behaviors of the dynamic and thermal structures and heat transfer rate (Nu), the heatlines distribution and the irreversibility rate are appraised. It was found that the flow is constantly two contra-rotating symmetric cells. The heat transfer is almost doubled by increasing Ra. A lack of cooling performance was identified between Ar = 0.5 and 0.75. The inclination 45° is the most appropriate cooling case. At constant Ra, the maximum stream-function and the global entropy generation remain almost unchanged by increasing the pin number from 1 to 8 and the entropy generation is of thermal origin for low Ra, so that the fluid friction irreversibility becomes dominant for Ra larger than 10⁵.

Improvements may include three-dimensional complex geometries, accounting for thermal radiation, high unit power and turbulence modelling. Such factors effects will be conducted in the future.

The cooling performance/heat dissipation in LED lamps is a key manufacturing factors, which determines the lifetime of the electronic components. The best design and installation give the opportunity to increase further the product shelf-life.

Both cooling performance, irreversibility rate and enclosure configuration (aspect ratio and inclination) are taken into account. This cooling scheme will give a superior operating mode of the hot components in an era where energy harvesting, storage and consumption is met with considerable attention in the worldwide.

The purpose of this study is to numerically investigate the effect of jet impingement, magnetic field and nanoparticle shape (sphericity) on the hydrodynamic/heat transfer characteristics of nanofluids over stationary and vibrating plates.

A two-dimensional finite volume method-based homogeneous heat transfer model has been developed, validated and used in the present investigation. Three different shapes of non-spherical carbon nanoparticles namely nanotubes, nanorods and nanosheets are used in the analysis. Sphericity-based effective thermal conductivity of nanofluids with Brownian motion of nanoparticles is considered in the investigation. Moreover, the ranges of various comprehensive parameters used in the study are Re = 500 to 900, St = 0.0694 to 0.2083 and Ha = 0 to 80.

The hydrodynamic/heat transfer performance of jet impingement in the case of vibrating plate is 298 per cent higher than that of stationary plate at Re = 500. However, for the case of vibrating plate, a reduction in the heat transfer performance of 23.35 per cent is observed by increasing the jet Reynolds number from 500 to 900. In the case of vibrating plate, the saturation point for Strouhal number is found to be 0.0833 at Re = 900 and Ha = 0. Further decrement in St beyond this limit leads to a drastic reduction in the performance. Moreover, no recirculation in the flow is observed near the stagnation point for jet impingement over vibrating plate. It is also observed that the effect of magnetic field enhances the performance of jet impingement over a stationary plate by 36.18 per cent at Ha = 80 and Re = 900. Whereas, opposite trend is observed for the case of vibrating plate. Furthermore, at Re = 500, the percentage enhancement in the Nuavg values of 3 Vol.% carbon nanofluid with nanosheets, nanorods and nanotubes are found to be 47.53, 26.86 and 26.85 per cent when compared with the value obtained for pure water.

The present results will be useful in choosing nanosheets-based nanofluid as the efficient heat transfer medium in cooling of high power electronic devices. Moreover, the obtained saturation point in the Strouhal number of the vibrating plate will help in cooling of turbine blades, as well as paper and textile drying. Moreover, the developed homogeneous heat transfer model can also be used to study different micro-convection phenomena in nanofluids by considering them as source terms in the momentum equation.

Impingement of jet over two different plate types such as stationary and vibrating is completely analyzed with the use of a validated in-house FVM code. A complete investigation on the influence of external magnetic field on the performance of plate type configuration is evaluated. The three fundamental shapes of carbon nanoparticles are also evaluated to obtain sphericity based hydrodynamic/heat transfer performance of jet impingement.

The purpose of this study is to analyze a new idea for external flow over a cylinder to increase the heat transfer and reduce pressure drop. Using wedge-shaped porous media in the front and wake regions of the cylinder can improve its hydrodynamic, and the rotating flow in the wake region can enhance the heat transfer with increased porous–liquid contact. Permeability plays a vital role, as a high-permeable medium improves heat transfer, whereas a low-permeable region improves the hydrodynamic.

Therefore, in the current research, external forced convection of nanofluid laminar flow over a bundle of cylinders is simulated using a two-phase mixture model. Four cases with different porous blocks around the cylinder are assessed: rectangular porous; wedge shape in trailing edge (TEP); wedge shape in leading and trailing edges (LTEP); and no porous block case. Also, three different lengths of wedge-shaped regions are considered for TEP and LTEP cases.

Results are presented in terms of Nusselt (Nu), Euler (Eu) and the performance evaluation criterion (PEC) numbers for various Reynolds (Re) and Darcy (Da) numbers.

It was found that in most situations, LTEP case provides the highest Nu and PEC values. Also, optimal Re and porous medium length exist to maximize PEC, depending on the values of Da and nanofluid volume fraction.

The purpose of this study is to perform computational analysis on the steady flow and heat transfer due to a slot nanojet impingement onto a heated moving body. The object is moving at constant speed and nanoparticle is included in the heat transfer fluid. The unsteady flow effects and interactions of multiple impinging jets are also considered.

The finite volume method was used as the solver in the numerical simulation. The movement of the hot body in the channel is also considered. Influence of various pertinent parameters such as Reynolds number, jet to target surface spacing and solid nanoparticle volume fraction on the convective heat transfer characteristics are numerically studied in the transient regime.

It is found that the flow field and heat transfer becomes very complicated due to the interaction of multiple impinging jets with the movement of the hot body in the channel. Higher heat transfer rates are achieved with higher values of Reynolds number while the inclusion of nanoparticles resulted in a small impact on flow friction. The middle jet was found to play an important role in the heat transfer behavior while jet and moving body temperatures become equal after t = 80.

Even though some studies exist for the application of jet impingement heat transfer for a moving plate, the configuration with a solid moving hot body on a moving belt under the impacts of unsteady flow effects and interactions of multiple impinging jets have never been considered. The results of the present study will be helpful in the design and optimization of various systems related to convective drying of products, metal processing industry, thermal management in electronic cooling and many other systems.

To fabricate and characterise novel heat sinks manufactured by selective laser melting (SLM). The investigation explores features of SLM produced heat sinks that may be exploited to improve their heat transfer capability.

The study was conducted on heat sinks manufactured from 316L stainless steel and aluminium 6061. The heat transfer devices' thermal and pressure drop performances were determined by experimental test.

The research demonstrates the performance enhancements that can be realised by using novel heat sink designs, fabricated by SLM, over conventional pin fin arrays. aluminium 6061 is used with the process to illustrate the improvement in heat transfer provided by higher conductivity feedstock materials.

Although the manufacturing technique is still in the development stage and the heat transfer devices that have so far been manufactured should not be considered optimal, the potential for creative new designs and applications is clear. This study highlights the need to develop the SLM process parameters to allow the repeatable production of heat transfer devices from higher conductivity metals with controllable surface finishes.

This paper outlines the design issues and performance of novel heat transfer devices fabricated using SLM. A new material, aluminium 6061, is introduced to the family of materials that can be processed with SLM and example heat sinks are tested.

The purpose of this paper is to improve the overall heat transfer performance and the temperature uniformity of the heat sink and to explore the effects of the jet Reynolds number and the nanoparticle volume fraction of the nanofluids on the flow and heat transfer performance.

A heat sink with discontinuous arc protrusions in the wall jet region is proposed for confined slot jet impingement. A sloping upper cover plate is added to improve the heat transfer effect in this area. An Al₂O₃–water nanofluid is selected as the working fluid of the jet for better heat transfer. The Standard k-e turbulence model is used for numerical calculation. The key structural parameters of the heat sink are optimized by the response surface method and a genetic algorithm. The effects of the jet Reynolds number (Re) and the nanofluid concentration (ϕ) on the flow and heat transfer performance of the optimized heat sink are investigated.

The average Nusselt number of the optimal heat sink is 8.2% higher and the friction resistance is 5.9% lower than that of the initial flat plate heat sink when ϕ = 0.02 and Re = 8,000. The discontinuous arc protrusions and the sloping upper cover plate substantially enhance the heat transfer in the later stage of jet development, improving the temperature uniformity of the heat sink. The maximum temperature difference of the optimal heat sink is 28.1% lower than that of the flat plate heat sink at the same nozzle height. As the jet Reynolds number and the nanofluid particle concentration increase, the Nusselt number of the optimized heat sink and the friction coefficients increase, resulting in a decrease in the evaluation coefficient. However, the overall temperature uniformity of the heat sink is improved under all conditions.

The novel heat sink structure provides a new way to enhance the heat transfer and temperature uniformity of confined slot jet impingement. The flow and heat transfer performance of the heat sink impinged by confined slot jet of nanofluids are obtained. The combination of response surface method and genetic algorithm can be applied to the multi-objective optimization of heat resistance and flow resistance of heat sink.