Search results

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

Given the complexity of building information modeling (BIM) adoption decisions in small- and medium-sized enterprises (SMEs) in the Architecture, Engineering and Construction (AEC) industry, understanding BIM adoption decision-making through the net effect of a single factor on BIM adoption decisions alone is limited. Therefore, this paper analyzed the co-movement effect of managers' psychological factors on the BIM adoption decisions from the perspective of managers' perceptions. The purpose is to let managers have a deep understanding of their BIM adoption decisions, and put forward targeted suggestions for the AEC industry to promote the adoption of BIM by SMEs.

Data from 192 managers in SMEs collected by the questionnaire were used in a fuzzy set qualitative comparative analysis (fsQCA). Due to the limitations of fsQCA in making the best use of the data used, as a complement to fsQCA, necessary conditions analysis (NCA) was used to analyze the extent to which necessary conditions influenced the outcome.

(1) NCA analysis shows that high perceived resource availability (PRA) and high performance expectancy (PE) are necessary conditions for high BIM adoption intention (AI). (2) fsQCA analysis shows that high PE is the single core condition for high AI. fsQCA analysis identifies three configurations of managers' psychological factors, reflecting three types of managers' decision preferences, namely benefit preference, loss aversion and risk avoidance, respectively. Different decision preferences may lead to different BIM adoption strategies, such as full in-house use, partial in-house/outsourcing and full outsourcing of BIM processes. (3) High perceived risk (PR) and low perceived business value of BIM (PBV) are the core conditions for low AI.

This paper expands on the application of fsQCA to context of BIM adoption decisions. Based on the results of fsQCA analysis, this paper also establishes the relationship between managers' decision-making psychology and BIM adoption strategy choice and analyzes the impact of different decision biases on BIM adoption strategy choice. It concludes with suggestions for encouraging managers to adopt BIM and for avoiding decision-making bias.

The primary objectives of the case study are to get the participants exposed to the issues of working capital which even profitable companies face on a day-to-day basis; give the participants an understanding of how to balance the, at times, conflicting objectives of increasing profits and sales through favorable credit terms; and expose them to the impact of increase in inventory levels and average collection period on margins in a period of slow growth. They will also learn about the concept of factoring and its uses.

The case study is about a group of companies engaged in education, steel fabrication and oil businesses owned by a single proprietor. The company was based in Fatehnagar which was part of Hyderabad district in the state of Telangana, India, and the case study traces the origins of the group from 1960s to 2021. The group was invested the surplus cash flows from the oil business to initiate and expand other businesses during this period. The economic downturn due to the COVID-19 pandemic had hit the company, particularly its oldest business – Noble Chemical Agency. The oil business was facing issues related to its growth and profitability, and the uncertainty around COVID-19-related restrictions had only augmented the fears of the management. The case study looks at issues and the dilemma which the owner of the company faced. The case study highlights various issues related to working capital management, especially related to receivables management and inventory levels faced by businesses during the slow-growth phase. It demonstrates how working capital management issues, if not resolved in time, can lead to insolvency of even a successful company with a sound business model.

The case study is meant for teaching in postgraduate management programs (Master of Business Administration and Postgraduate Diploma in Management) in the following courses: corporate finance/financial management course in the first year (the case study should be taught towards the end of the course); and management accounting courses in first year (the case study should be positioned in the middle of these courses). The case study can also be used to highlight issues related to working capital and small business management in a Management Development Programme (MDP) course for “Finance fundamentals for non-finance executives”.

Teaching notes are available for educators only.

CSS 1: Accounting and finance.

This study aims to evaluate the advantages and disadvantages of auditor mandatory suspicious activity reporting versus the exercise of professional judgement in the anti-money laundering regimes of the UK and the USA.

The research draws upon the following sources. Firstly, statistics provided by the UK National Crime Agency, 2019 (NCA) regarding suspicious activity report (SAR) filing rates. Secondly, anti-money laundering legislation in the USA and UK. Thirdly, statements made in the political domain in the USA, particularly those which raised constitutional concerns during the progress of the Patriot Act 2001. Finally, statements and recommendations by a UK Parliamentary Commission enquiring into the effectiveness of the suspicious activity reporting regime.

The UK reporting regime does not accommodate professional judgement, resulting in the filing of SARs with limited intelligence value. This contrasts with discretionary reporting in the USA: voluntary reporting guides and influences auditor behaviour rather than mandating it. Defensive filing by UK auditors (defence to anti-money launderings [DAMLs]) has increased in recent years but the number of SARs filed has declined.

The study evaluates auditor behavioural responses to legislative regimes which mandate or alternatively accommodate discretion in the reporting suspicion of money laundering. Consideration of constitutional and judicial activism in this context is a novel contribution to the literature. For its theoretical framework the study uses Foucault’s concept of discipline of the self to evaluate auditor behaviour under both regimes.

This study aims to investigate a mediation model in which generative learning positively affects marketing innovation and both organizational control and relationship openness mediate the relationship between learning intent and generative learning of international joint ventures (IJVs) in emerging markets. We also decipher the degree of necessity of these factors for generative learning and of generative learning for marketing innovation.

A sample of 181 marketing managers of IJVs in Vietnam, an emerging market, was surveyed to collect data. Partial least squares structural equation modeling (PLS-SEM) was employed to test the net effect, and necessary condition analysis (NCA) was used to decipher the degree of necessity.

The PLS-SEM results demonstrate that the effect of learning intent on generative learning is fully mediated by organizational control and relationship openness, which in turn leads to marketing innovation. The NCA findings reveal that all three factors, namely learning intent, organizational control and relationship openness, serve as necessary conditions for generative learning. However, generative learning does not play the role of a necessary condition for marketing innovation.

The study findings suggest that IJVs in emerging markets should pay attention not only to the net effects of those factors but also to their degrees of necessity for generative learning in order to achieve marketing innovation.

The study contributes to the literature by confirming the mediating roles of organizational control and relationship openness in the relationship between learning intent and generative learning. Furthermore, it is among the first to decipher the degrees of necessity of these factors for generative learning and of generative learning for the marketing innovation of IJVs in emerging markets.

High-tech enterprises, as the national innovation powerhouses, have garnered considerable interest, particularly regarding their technological innovation capabilities. Nevertheless, prevalent research tends to spotlight the impact of individual factors on innovative behavior, with only a fraction adopting a comprehensive viewpoint, scrutinizing the causal amalgamations of precursor conditions influencing the overall innovation proficiency of high-tech enterprises.

This paper employs a hybrid approach integrating necessary condition analysis (NCA) and fuzzy-set qualitative comparative analysis (fsQCA) to examine the combinatorial effects of antecedent factors on high-tech enterprises' innovation output. Our analysis draws upon data from 46 listed Chinese high-tech enterprises. To promote technological innovation within high-tech enterprises, we introduce a novel perspective that emphasizes technological innovation networks, grounded in a network agents-structure-environment framework. These antecedents are government subsidy, tax benefits, customer concentration, purchase concentration rate, market-oriented index and innovation environment.

The findings delineate four configurational pathways leading to high innovative output and three pathways resulting in low production.

This study thereby enriches the body of knowledge around technological innovation and provides actionable policy recommendations.

To support the advancement of an underrepresented category of research in the field of entrepreneurial teams, this study proposes and tests a novel empirical model that connects two team emergent states, namely team entrepreneurial passion (TEP) and transactive memory systems (TMSs), and their influence on team performance.

The data were gathered using an online questionnaire distributed to undergraduate students who had formed entrepreneurial teams as part of a course assignment. Two methods were executed on the obtained data, namely partial least-square structural equation modelling (PLS-SEM) and necessary condition analysis (NCA).

The results uphold the hypothesised mediation role of TMSs between TEP and team performance. Of the two direct relations in the model, only the necessary conditions were present for the effect of TEP on TMSs.

The issue of the small sample size, a common feature in entrepreneurial team research, as discussed in the methodical section of the paper, is sidestepped with the use of PLS-SEM tools. Nonetheless, a larger sample size could have increased confidence in the results' validity. In addition, a longitudinal approach to data collection and analysis could have been used to augment that confidence further.

Three practical implications stem from the empirical findings. First, it lends support for implementing teaching approaches and task designs that are envisaged to improve team functioning in university classrooms. Making a business plan boosts students' desire to exploit the received knowledge and find a venture, so the teaching effort in entrepreneurship courses can have real-world consequences.

By testing the mediation model, new insights are made into the associations between team emerging states and, subsequently, team performance. In addition, this study responds to recent calls in the literature to incorporate NCA in an entrepreneurial setting.

This study aims to elaborate on the antecedents of muzakki (zakat payers) paying zakat (Islamic philanthropy) through institutions with social media arrangements, while the drivers of social media engagement are used in the conceptual model with trust and intention.

Overall, the final sample of 230 respondents was obtained through the database of official zakat management institutions. Regarding analytical tools, this study combines the partial least square structural equation modelling and necessary condition analysis approaches to explore research findings.

The findings show that firm-generated information and trust play an important role directly and indirectly. At the same time, other constructions, such as social factors and user-based factors, provide variations in necessary conditions to increase the muzakki’s intention to channel their zakat through institutions.

Zakat institutions must focus on improving social media-based services by integrating important information, such as credibility and transparency, with muzakki’s preferences. Additionally, zakat information on social media must be attractively packaged and contain facilities that muzakki can use in communicating, such as; their opinions, suggestions and input. The findings, in general, underscore the attachment between muzakki and zakat institutions through social media, which can significantly impact the positive environment of zakat institutions.

To the author’s knowledge, this study is pioneering in conceptualizing and testing a theoretical model linking drivers of social media engagement, trust and intention to pay zakat through the institution, particularly in the levels of necessity.

This research paper aims to explore the concerns and determinants of travelers’ behavior toward ChatGPT in the hospitality and tourism context. It also examines the weight of risk factors versus that of motivation and innovation characteristics influencing travelers’ approach behaviors toward ChatGPT.

A cumulative prospect theory was used to determine travelers’ responses to ChatGPT. This study, using a fuzzy-set qualitative approach, explored risk, motivation and innovation factors as determinants of approach behaviors for ChatGPT.

Findings revealed that risk, motivation and innovation factors were the key triggers of approach behaviors for ChatGPT. An intricate combination effect of the perceived risk, motivation and innovation characteristics was found, and the necessary predictors were determined.

The findings of this study will expand our current knowledge and offer practical insights for the development of ChatGPT in the hospitality and tourism sector.

This study makes a significant contribution to the existing literature by providing a nuanced understanding of the intricate interplay between the various factors that shape customer behavior in the context of technology adoption in hospitality and tourism studies.

Entrepreneurs are generally considered to be committed in order to strive for highly desirable goals, such as growth or commercial success. However, commitment is a multidimensional concept and may have asymmetric relationships with positive or negative entrepreneurial outcomes. This paper aims to provide a nuanced perspective to show under what conditions commitment may be detrimental for entrepreneurs and lead to overinvestment.

Using a sample of entrepreneurs from incubators in France (N = 437), this study employs a configurational perspective, fuzzy-set qualitative comparative analysis (fsQCA), to identify which commitment profiles lead entrepreneurs to overinvest different resources in their entrepreneurial projects.

The paper exposes combinations of conditions that lead to overinvestment and identifies five different commitment profiles: an “Affective profile”, a “Project committed profile”, a “Profession committed profile”, an “Instrumental profile”, and an “Affective project profile”.

The results show that affective commitment is a necessary condition for entrepreneurs to conduct overinvesting behaviors. This complements previous linear research on the interdependence between affect and commitment in fostering detrimental outcomes for nascent entrepreneurs.