Search results

The purpose of this study is to analyze the environmental efficiency level and trend of the transportation sector in the upper–mid–downstream of the Yangtze River Economic Belt and the JingJinJi region in China and assess the effectiveness of policies for protecting the low-carbon environment.

This study uses the meta-frontier slack-based measure (SBM) approach to evaluate environmental efficiency, which targets and classifies specific regions into regional groups. First, this study employs the SBM with the undesirable outputs to construct the environmental efficiency measurement models of the four regions under the meta-frontier and group frontiers, respectively. Then, this study uses the technology gap ratio to evaluate the gap between the group frontier and the meta-frontier.

The analysis reveals several key findings: (1) the JingJinJi region and the downstream of the YEB had achieved the overall optimal production technology in transportation than the other two regions; (2) significant technology gaps in environmental efficiency were observed among these four regions in China; and (3) the downstream region of the YEB exhibited the lowest levels of energy consumption and excessive CO₂ emissions.

To evaluate the differences in environmental efficiency resulting from regions and technological gaps in transportation, this study employs the meta-frontier model, which overcomes the limitation of traditional environmental efficiency methods. Furthermore, in the practical, the study provides the advantage of observing the disparities in transportation efficiency performed by the Yangtze River Economic Belt and the Beijing–Tianjin–Hebei regions.

This study aims to analyse the efficiency effects of institutional distance on Chinese outward foreign direct investment (FDI) in Africa.

The study utilised the true fixed-effect stochastic frontier analysis (SFA) model. Data from 2003 to 2016 (14 years) were acquired from 42 targeted African countries, which are included in the analysis.

The results reveal that FDI flow efficiency can be maximised with a high institutional distance between China and African countries. Contrariwise, comparable institutional distance, measured by the rule of law, regulatory quality and government effectiveness between the host and home countries, reflected a significant positive impact for Chinese outward foreign direct investment (OFDIs), indicating Chinese MNEs can invest directly in a country with comparable institutional characteristics.

There have been limited exceptional studies that assessed the effect of institutional distance between emerging countries. However, none of these studies investigated the effect of institutional distance between China and Africa at a national level. Using the advantage of the SFA model, this study assesses the efficiency effects of institutional distance between the host and home country.

The paper aims at addressing the following research questions: does institutional quality improve countries' environmental efficiency? And which pillars of institutional quality improve countries' environmental efficiency?

By specifying a directional distance function in the context of stochastic frontier method where GHG emissions are considered as the bad output and the GDP is referred as the desirable one, the work computes the environmental efficiency into the appraisal of a production function for the European countries over three decades.

According to the countries' performance, the findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries. In this environmental context, the role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries.

This article attempts to analyze the role of different dimensions of institutional quality in different European countries' performance – in terms of mitigating GHGs (undesirable output) – while trying to raise their economic performance through their GDP (desirable output).

1. The paper aims at addressing the following research question: does institutional quality improve countries' environmental efficiency?

2. We adopt a directional distance function in the context of stochastic frontier method, considering 40 European economies over a 30-year time interval.

3. The findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries.

4. The role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries, while the performance decreases for the low middle-income countries.

The paper aims at addressing the following research question: does institutional quality improve countries' environmental efficiency?

We adopt a directional distance function in the context of stochastic frontier method, considering 40 European economies over a 30-year time interval.

The findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries.

The role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries, while the performance decreases for the low middle-income countries.

The development of green manufacturing has become essential to achieve sustainable development and modernize the nation’s manufacturing and production capacity without increasing nonrenewable resource consumption and pollution. This study investigates the effect of green industrial practices on technical efficiency for Thai manufacturers.

The study uses stochastic frontier analysis (SFA) to estimate the stochastic frontier production function (SFPF) and inefficiency effects model, as pioneered by Battese and Coelli (1995).

This study shows that, on average, Thai manufacturing firms have experienced declining returns-to-scale production and relatively low technical efficiency. However, it is estimated that Thai manufacturing firms with a green commitment obtained the highest technical efficiency, followed by those with green activity, green systems and green culture levels, compared to those without any commitment to green manufacturing practices. Finally, internationalization and skill development can significantly improve technical efficiency.

Green industry policy mixes will be vital for driving structural reforms toward a more environmentally friendly and sustainable economic system. Furthermore, circular economy processes can promote firms' production efficiency and resource use.

To the best of the authors' knowledge, this study is the first to investigate the effect of green industry practices on the technical efficiency of Thai manufacturing enterprises. This study also encompasses analyses of the roles of internationalization, innovation and skill development.

This paper aims to define the efficiency achieved by urban transport companies in Spain concerning the resources they use, considering the type of management used for implementation, public-private, and size.

This study consisted of an analysis of the efficiency of 229 public-private urban transport operators during the period 2012–2021 using Data Envelopment Analysis, the Malmquist Index and inference estimators to determine productivity, efficiency change into Pure Technical Efficiency Change (PTECH), and scale efficiency change.

Based on the efficiency analysis, the authors concluded that of the 229 companies studied, more than 35 were inefficient in all analysed periods. Considering the sample used, direct management is considered significantly more efficient. It cannot be concluded that the size of these companies influences their efficiency, as the data show unequal development behaviours in the studied years.

This study provides arguments on whether there is a significant difference between the two types of management in the urban transport sector. It also includes firm size as a study variable, which has not been previously considered in other studies related to urban transport efficiency. Efficiency should be a crucial factor in determining funding allocation in this sector, as it encourages operators to optimize and improve their services.

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

The Internet has changed consumer decision-making and influenced business behaviour. User-generated product information is abundant and readily available. This paper argues that user-generated content can be efficiently utilised for business intelligence using data science and develops an approach to demonstrate the methods and benefits of the different techniques.

Using Python Selenium, Beautiful Soup and various text mining approaches in R to access, retrieve and analyse user-generated content, we argue that (1) companies can extract information about the product attributes that matter most to consumers and (2) user-generated reviews enable the use of text mining results in combination with other demographic and statistical information (e.g. ratings) as an efficient input for competitive analysis.

The paper shows that combining different types of data (textual and numerical data) and applying and combining different methods can provide organisations with important business information and improve business performance.

The paper shows that combining different types of data (textual and numerical data) and applying and combining different methods can provide organisations with important business information and improve business performance.

The study makes several contributions to the marketing and management literature, mainly by illustrating the methodological advantages of text mining and accompanying statistical analysis, the different types of distilled information and their use in decision-making.

This study aims to conduct performance and clustering analyses with the help of Digital Government Reference Library (DGRL) v16.6 database examining the role of emerging technologies (ETs) in public services delivery.

VOSviewer and SciMAT techniques were used for clustering and mapping the use of ETs in the public services delivery. Collecting documents from the DGRL v16.6 database, the paper uses text mining analysis for identifying key terms and trends in e-Government research regarding ETs and public services.

The analysis indicates that all ETs are strongly linked to each other, except for blockchain technologies (due to its disruptive nature), which indicate that ETs can be, therefore, seen as accumulative knowledge. In addition, on the whole, findings identify four stages in the evolution of ETs and their application to public services: the “electronic administration” stage, the “technological baseline” stage, the “managerial” stage and the “disruptive technological” stage.

The output of the present research will help to orient policymakers in the implementation and use of ETs, evaluating the influence of these technologies on public services.

The research helps researchers to track research trends and uncover new paths on ETs and its implementation in public services.

Recent research has focused on the need of implementing ETs for improving public services, which could help cities to improve the citizens’ quality of life in urban areas. This paper contributes to expanding the knowledge about ETs and its implementation in public services, identifying trends and networks in the research about these issues.

The purpose of this study was to examine how well a strength-based program grounded in positive psychology principles can advance the practical critical thinking skills of those pursuing the teacher training course.

This study used a single-group pre-test post-test design with 35 teacher-trainees from the Bachelor of Education course. The two-and-a-half-week strength-based program used the values in action survey to identify strengths. Pre- and post-test scores, measured with the Cornell Critical Thinking Test – Level Z, underwent Statistical Package for Social Sciences analysis including paired samples t-test for subcomponent and overall composite analysis.

Analysis of the pre- and post-test scores demonstrated a statistical significance in the critical thinking scores obtained by the teacher-trainees. Post-test scores were consistently significant. Out of the elements of critical thinking, induction, meaning, observation and credibility were more prominent. Deduction and assumption identification were also having a significant effect.

Most critical thinking programs focus on evaluating specific teaching methods for improving critical thinking skills. In education, positive psychology studies often center on students’ well-being, attention spans and academic success, aligning with wellness programs. Despite the importance of strengths in positive psychology, there is a lack of research on using a strength-based approach to boost critical thinking skills. This study aims to enhance teacher-trainees’ critical thinking by leveraging their individual strengths, moving away from traditional instructional strategies.