Search results

This paper aims to present an improvement to the power quality of the grid by using a colliding body optimization (CBO) based proportional-integral (PI) compensated design for a grid-connected solar photovoltaic-fed brushless DC motor (BLDC)-driven water pumping system with a bidirectional power flow control. The system with bidirectional power flow allows driving the pump at full proportions uninterruptedly irrespective of the weather conditions and feeding a grid when water pumping is not required.

Here, power quality issue is taken care of by the optimal generation of the duty cycle of the voltage source converter. The duty cycle is optimally generated by optimal selection of the gains of the current controller (i.e. PI), with the CBO technique resulting in a nearly unity power factor as well as lower total harmonic distortion (THD) of input current. In the CBO technique, the gains of the PI controller are considered as agents and collide with each other to obtain the best value. The system is simulated using MATLAB/Simulink and validated in real time with OPAL RT simulator, OP5700.

It was found that the power quality of grid using the CBO technique has improved much better than the particle swarm optimization and Zeigler–Nichols approach. The bidirectional flow of control of VSC allowed for optimum resource utilization and full capacity of water pumping whatever may be weather conditions.

Improved power quality of grid by optimally generation of the duty cycle for the proposed system. A unit vector tamplate generation technique is used for bidirectional power transfer.

A DC-DC converter plays a major role in many applications such as fuel cell, hybrid electric vehicle, renewable energy system, etc. Among these converters, the bidirectional DC-DC fly-back converters are more attractive because of their simple structure and easy control. However, the power devices present in this converter are subjected to high-voltage stresses due to the leakage inductor energy of the transformer. In order to recycle the leakage inductor energy and to minimise the voltage stress on the power devices, the purpose of this paper is to focus on the transformer less bidirectional DC-DC converter with high efficiency.

In order to reduce the switching loss, a few passive elements are added. The auxiliary circuit consists of a resonant inductor and resonant capacitors. This auxiliary circuit affords zero voltage switching function and cancels out the ripple component present in the main inductor current irrespective of the power flow direction.

In this work three topologies of bidirectional converters for BLDC motor are investigated and are compared in terms of mechanical power output and THD.

The paper presents enhanced versions of the converters.

This paper aims to propose a bidirectional hidden converter (BHC)-based three-phase DC–AC conversion for energy storage application. BHC is the new concept to vary an energy storage device voltage into wide range. Hidden converter power loss and power rating are reduced by using zero-sequence injection-based carrier-based pulse-width modulation (CBPWM) strategy.

By using this control strategy, a BHC processes only little amount of power during double-stage conversion, mostly during direct or single-stage conversion of the three-phase three-port converter (TPTPC) only processing the maximum power.

TPTPC consists of two sets of positive group switches for inversion process, one set of switches is regular inverter switches called vertical positive group switches, and the second set is anti-series switches, which are horizontally connected for direct or single-stage conversion.

Characteristics, principles and implementations of proposed DC–AC 3Ø conversion system and its PWM strategy are analyzed. Through experimental outputs, the effectiveness and viability of the proposed solutions are validated.

This paper aims to propose a simplified model of vanadium redox flow batteries (VRBs) for VRB energy storage system (ESS) design considering the operational characteristics of VRB, and a VRB ESS, considering the low terminal voltage of VRB, was presented.

According to the designed topology of VRB ESS and the simplified model of VRB, a small perturbation analysis method was used to establish the transfer function of VRB ESS, and the controller parameters of VRB ESS under constant charging and discharging current were designed.

Test results have demonstrated that this designed VRB ESS has fast response, small overshoot, strong adaptation and high steady precision, which strongly verified the reasonable design.

This simplified model of VRB can be suitably used for VRB ESS design. This designed VRB ESS realized the bidirectional power flow of VRB and AC grid. In this designed VRB ESS, phase-shifted full-bridge converter and a single-phase inverter were used and VRB was charged and discharged under constant current.

The paper presents a topology of VRB ESS which can realize the bidirectional power flow of VRB and AC grid. Considering the complexity of VRB model, a simplified model of VRB was proposed for the controller parameters design of VRB ESS, and this method can be used in application.

The purpose of this paper is to analyze and simulate the control techniques that can be used to control the on-board conductive battery chargers (OCBCs) for electric vehicles applications. This paper also provides a comparative study of these control techniques.

Battery chargers would play an important role in the development of new battery electric vehicles (BEVs). The control techniques of these OCBCs can significantly influence the BEV performance during the charging mode from the ac grid. In addition, the proper selection of control systems of the OCBCs has a great impact on the power quality of the AC grid during the charging period. Therefore, this paper presents the analysis of different control techniques that are commonly used to control the battery chargers. In addition, a comparative study of different control techniques of the OCBCs for BEVs is provided.

The results have demonstrated that it is possible to significantly improve the efficiency, power factor and total harmonic distortion by using proportional-integral control and proportional-resonant control. The digital control can be used to validate the selected control technique.

The main objective of this paper is to analyze the different control methods that can be used to control the OCBCs during charging mode from the ac grid. In addition, this paper presents a comparative analysis between these control methods. In this paper, a digital control based on TMS320F2808 DSP is used to implement the proper control method for OCBCs.

The paper aims to present a grid-connected multi-inverter for solar photovoltaic (PV) systems to enhance reliability indices after selected the placement and level of PV solar.

In this study, the associated probability is calculated based on the solar power generation capacity levels and outages conditions. Then, based on this probability, dependability indices like average energy not supplied (AENS), expected energy not supplied and loss of load expectations (LOLE) are computed, also, another indices have been computed such as (customer average interruption duration index (CAIDI), system average interruption frequency index (SAIFI) and system average interruption duration index (SAIDI)) addressing by affected customers with distribution networks reliability assessment, including PV. On the basis of their dependability indices and active power flow, several PV solar modules installed in several places are analyzed. A mechanism for assessing the performance of the grid's integration of renewable energy sources is also under investigation.

The findings of this study based on data extracted form a PV power plant connected to the power network system in Diyala, Iraq 132 kV, attempts to identify the system's weakest points in order to improve the system's overall dependability. In addition, enhanced reliability indices are given for measuring solar PV systems performance connected to the grid and reviewed for the benefit of the customers.

The main contributions of this study are two methods for determining the reliability of PV generators taking into consideration the system component failure rates and the power electronic component defect rates in a PV system which depend on the power input and the power loss using electrical transient analysis program (ETAP) program.

This paper aims to review comprehensively the different voltage-boosting techniques and classifies according to their voltage gain, stress on the semiconductor devices, count of the total components and their prominent features. Hence, the focus is on non-isolated step-up converters. The converters categorized are analyzed according to their category with graphical representation.

Many converters have been reported in recent years in the literature to meet our power requirements from mill watts to megawatts. Fast growth in the generation of renewable energy in the past few years has promoted the selection of suitable converters that directly impact the behaviour of renewable energy systems. Step-up converters are a fast-emerging switching power converter in various power supply units. Researchers are more attracted to the derivation of novel topology with a high voltage gain, low voltage and current stress, high efficiency, low cost, etc.

A comparative study is done on critical metrics such as voltage gain, switch voltage stress and component count. Besides, the converters are also summarized based on their advantages and disadvantages. Furthermore, the areas that need to be explored in this field are identified and presented.

Types of analysis usually performed in dc converter and their needs with the areas need to be focused are not yet completely reviewed in most of the articles. This paper gives an eyesight on these topics. This paper will guide the researchers to derive and suggest a suitable topology for the chosen application. Moreover, it can be used as a handbook for studying the various topologies with their shortfalls, which will provide a way for researchers to focus.

Predictive current control (PCC) of three-to-five-phase direct matrix converters (DMCs) is computationally expensive. For this reason, this study aims to consider a reduced number of switching states of DMC in PCC algorithm to predict the control objectives, such as output current control and input reactive power control.

The switching sequences which yield the voltage vectors of variable amplitude at a constant frequency in space are considered for the prediction and optimization step of PCC algorithm. For the selected voltage vectors, the phase angles of the output vectors are independent on the phase angles of the input vectors. In a three-to-five-phase DMC, there are 243 valid switching states. Among the switching states, only 91 states are considered using the aforementioned concept of variable amplitude output at a constant frequency. This reduced number of switching states simplifies the computational complexity of MPC based current control of three-to-five-phase DMC.

The computational complexity of the proposed PCC based DMC is lower than the all 243 vectors based PCC. The current total harmonic distortion, transient current response and input reactive power control for the simplified 91 vector based PCC are similar to the all 243 vectors based PCC.

A reduced number of switching sequence is considered for the prediction and optimization step of PCC algorithm. Hence, PCC algorithm can be sampled at a high frequency in real-time applications. Then, the performance of the PCC will be improved.

The purpose of this paper is to carry out a detailed analysis of two port converter fed by Solar and wind sources during different operational modes by small signal modelling. The converter is fully characterized and simulated using Matlab/Simulink. The voltage and current waveforms along with their corresponding expressions describing the converter operation are presented in detail. Then the DC-averaged equivalent topology is derived using circuit averaging technique. A complete derivation of the power stage transfer functions relevant to the capacitor voltage loop, such as capacitor voltage to solar voltage and inductor current to wind input voltage is obtained.

Stability analysis is used to analyze the small deviations around the steady-state operating point which helps in modeling the closed loop converter parameters. This paper presents the analysis, modeling and control of two port Cuk-buck converter topology.

Based on the results, a control strategy is designed to manage the energy flow within the system. A lab-level prototype for Cuk-buck converter with PWM controller is implemented and tested under various input conditions to study the performance of the converter during seasonal changes. The simulation and experimental results showed that effective operation and control strategy of the hybrid power supply system managed to be achieved alongside its feasible outputs.

This analysis can be extended to all power electronic converters and will be useful for the design of controllers.

An appropriate control design plays a key role in enhancing the overall performance of the system. Hence, this paper is intended to present in detail the small signal modeling of the Cuk-buck converter along with the control design for all the switching modes.

Though this type of converter topology has been discussed widely in literature, very scarce literature is available related to modeling and control design of the converter. A state-space averaging model of the converter followed by a type-II compensator design is described, and prototype design and experimental results are also presented.

This paper aims to introduce a new fault protection scheme for microgrid DC networks with ring buses.

It is well recognized that the protection scheme in a DC ring bus microgrid becomes very complicated due to the bidirectional power flow. To provide reliable protection, the differential current signal is decomposed into several basic modes using adaptive variational mode decomposition (VMD). In this method, the mode number and the penalty factor are chosen optimally by using arithmetic optimization algorithm, yielding satisfactory decomposition results than the conventional VMD. Weighted Kurtosis index is used as the measurement index to select the sensitive mode, which is used to evaluate the discrete Teager energy (DTE) that indicates the occurrence of DC faults. For localizing cable faults, the current signals from the two ends are used on a sample-to-sample basis to formulate the state space matrix, which is solved by using generalized least squares approach. The proposed protection method is validated in MATLAB/SIMULINK by considering various test cases.

DTE is used to detect pole-pole and pole-ground fault and other disturbances such as high-impedance faults and series arc faults with a reduced detection time (10 ms) compared to some existing techniques.

Verification of this method is performed considering various test cases in MATLAB/SIMULINK platform yielding fast detection timings and accurate fault location.