Search results

The purpose of this paper is to investigate the influence of back-EMF and current harmonics on position and speed estimation accuracy for single and dual three-phase (DTP) permanent magnet synchronous machines (PMSMs) with two fundamental-model-based sensorless control strategies which are widely utilized for AC machines, i.e. flux-linkage observer (FO) and simplified extended Kalman filter (EKF).

The effect of distorted back-EMF is studied for sensorless vector control of single three-phase PMSM. For the influence of current harmonics, unlike the existing literature where the current harmonics are deliberately injected, in this paper, sensorless switching-table-based direct torque control (ST-DTC) strategies for DTP-PMSM which inherently suffer from non-sinusoidal stator currents in addition to the distorted back-EMF, are investigated experimentally.

By employing the FO and simplified EKF-based sensorless vector control of single three-phase PMSM, it can be concluded that the rotor position estimation accuracy is less affected by the back-EMF harmonics when the simplified EKF method is utilized since it is less sensitive to such noises. When the influence of non-sinusoidal stator currents together with back-EMF harmonics is investigated for the conventional and modified ST-DTC of DTP-PMSM, it is indicated that the simplified EKF exhibits better position and speed estimation accuracy in both the conventional and modified ST-DTC strategies. In addition, its steady-state performance shows a slight superiority over that based on FO, in terms of flux and torque ripples, and THD of phase currents. For the dynamic performance, the estimated speed of simplified EKF shows less phase lag and fluctuations compared to that of FO.

This paper introduces the influence of back-EMF and current harmonics on sensorless control performance for single and DTP PMSMs. Detailed experimental results show that the simplified EKF exhibits better rotor position and speed estimation accuracy compared to that of FO due to its higher noise-rejection ability.

The purpose of this paper is to analyze the phase coil connections and winding factors of flux‐switching permanent magnet (FSPM) brushless AC machines with all poles and alternate poles wound, and different combinations of stator and rotor pole numbers.

The coil‐emf vectors, which are widely used for analyzing the conventional fractional‐slot PM machines with non‐overlapping windings, are employed for FSPM machines.

Although the coil‐emf vectors have been employed to obtain coil connections in the conventional fractional‐slot PM machines, they are different in FSPM machines. It is mainly due to different polarities in the stator of FSPM machines. In addition, from the coil‐emf vectors it is able to predict whether the back‐emf waveforms are symmetrical or asymmetric.

This is the first time that coil‐emf vectors are used to determine the coil connections and winding factors in FSPM machines with different topologies and combination of stator and rotor pole numbers.

The purpose of this paper is to investigate the electromagnetic performances of the permanent magnet linear synchronous machines (PMLSM) with sine and third harmonic (SIN + 3rd) shaping mover in comparison with the PMLSM with sine (SIN) shaping mover and conventional shaping mover.

The optimal amplitude of the injected third harmonic to re-shape the SIN + 3rd shaping permanent magnet (PM) for maximizing the thrust force is analytically derived and confirmed by finite element method (FEM). Furthermore, the PM edge thickness, the pole arc to pole pitch ratio and the tooth to slot ratio are optimized. It is found that the optimal amplitude of the injected third harmonic is one-sixth of the fundamental one, the optimal PM edge thickness, the pole arc to pole pitch ratio and the tooth to slot ratio are 0, 0.85 and 0.5 mm, respectively. In addition, the electromagnetic performances are analyzed and quantitatively compared for the PMLSM with SIN + 3rd shaping mover, SIN shaping mover and conventional shaping mover.

The average thrust force and efficiency of the PMLSM with SIN + 3rd shaping mover are improved significantly, while the thrust ripple is not increased, comparing to those of the PMLSM with SIN shaping mover. Meanwhile, the thrust ripple is lower than that of the conventional shaping mover.

The purely sinusoidal currents are applied in this analysis and the influences of harmonics in the current on electromagnetic performances are not considered.

This paper presents a PMLSM with SIN + 3rd shaping mover to improve the thrust force and efficiency without increasing the thrust ripple, considering the effects of the amplitude of the injected third harmonic to re-shape the SIN + 3rd shaping PM, the PM edge thickness, the pole arc to pole pitch ratio and the tooth to slot ratio.

The purpose of this paper is to investigate a five-phase permanent-magnet synchronous machine (PMSM) that features high-power density and high-fault-tolerant capability for electric vehicles (EVs).

The five-phase 20-slot/18-pole PMSM is designed by finite-element method. Two typical rotor structures which include Halbach array and rotor eccentricity are compared to achieve sinusoidal back electromotive force (EMF). The influence of slot dimensions on leakage inductance and short-circuit current is analyzed. The method to reduce eddy current loss of permanent magnets (PMs) is investigated. The machine performances under both healthy and fault conditions are evaluated. Finally, thermal behavior of the machine is studied by Ansys.

With both no-load and load performances considered, rotor eccentricity is proposed to reduce the harmonic contents of EMF. Increasing slot leakage inductance is an effective way to limit the short-circuit current. By segmenting PMs in circumferential direction, the PM eddy current loss is reduced and the machine efficiency is improved. With proper fault-tolerant control strategy, acceptable torque performance can be achieved under fault conditions. The proposed machine can safely operate under Class F insulation.

So far, many researches focus on multiphase PMSMs used in aviation fields, such as fuel pump and electric actuator. Differing from PMSMs used in aviation applications, machines for EVs require characteristics like wide speed ranges and variable operating conditions. Hence, this paper proposes a five-phase 20-slot/18-pole PMSM for EVs. The proposed design methodology is applicable to multiphase PMSMs with different slot/pole combinations.

The purpose of this paper is to investigate a novel axial flux-switching motor with sandwiched permanent magnet for direct drive electric vehicles (EVs), in which the torque density is increased and the cogging torque is decreased. For reducing the back-electromotive force (EMF) harmonics and cogging torque, a twisted structure is employed. To improve the dynamic performance of the axial field flux-switching sandwiched permanent magnet (AFFSSPM) motor a space vector modulation-direct torque and flux control scheme is proposed.

A multi-objective optimization is performed by means of artificial neural network and non-sorting genetic algorithm II to minimize the cogging torque while preserving the average torque.

A comparative study between two proposed machines and the conventional flux-switching permanent magnet (FSPM) machine is accomplished and the static electromagnetic characteristics are analyzed. It is demonstrated that the proposed model with twisted structure has significantly improved performance over the conventional FSPM machine in back-EMF and efficiency. The proposed controller has a speed loop only and contains neither the current loop nor hysteresis control. The AFFSSPM motor exhibits excellent dynamic performance with this scheme.

The axial flux-switching permanent-magnet machine is one of the most efficient machines but the AFFSSPM with sandwiched permanent magnet has not been specially reported to date. Thus in this paper, the authors report on optimal design of an axial flux-switching sandwiched permanent magnet machine for electric vehicles and investigate its dynamic performance.

Due to linear structure, linear switched flux permanent magnet machines (LSFPMMs) also may have odd pole primary, such as 9, 15, 21, etc., without unbalanced magnetic force in equivalent rotary machines. The paper aims to discuss these issues.

In order to increase the thrust force density, the influence of some major design parameters, including split ratio, PM thickness, primary slot width and secondary pole width, are investigated by finite element analysis. For reducing the thrust force ripple under on-load condition, the end auxiliary teeth are adopted and their positions are also optimized.

This novel 9/10 primary/secondary poles LSFPMM has high average thrust force and low thrust force ripple by optimization. The results demonstrate that the odd pole primary may be a good candidate for long-stroke linear direct drive application.

A novel 9/10 primary/secondary poles linear switched flux permanent magnet machine is developed in this paper. The similar conclusions could be obtained for other LSFPMMs with odd pole primary.

This paper aims to the improvement of permanent magnet shape in the popular permanent magnet synchronous machine (PMSM) is proposed in this paper in view to mitigate cogging torque magnitude and torque ripple.

A two-dimensional exact analytical approach of magnetic field distribution is established for the PMSM considering magnet shape and slot opening. The optimal magnet shape is constituted of small number of layers stacked radially. The thickness of each magnet layer is considered equal to about one mm or more; however, a parametric study was performed to determine pole pitch ratio value. The finite element method is used to validate the analytical results.

Cogging torque peaks and torque ripples can be mitigated significantly more than 90 per cent compared to results issued from machine having classical magnet shape. Raising the number of magnet layers can give better results. The results of this paper are compared also with those issued from the machine having sinusoidal magnet shape and give a good solution.

A new technique for cogging torque and torque ripple mitigation is proposed in this paper by changing permanent magnet shape. The proposed final magnet shape is constituted of a set of stacked and well-dimensioned layers relative to the opening angle.

This paper proposes a spoke-type fractional-slot concentrated windings (FSCW) permanent magnet (PM) machine for special vehicle driving systems to obtain higher torque and power density, high efficiency and wide field-weakening range. To enhance the efficiencies of multi-objective optimization processes, the respond surface (RS) method and black-hole (BH) algorithm are used.

The spoke-type FSCW PM machine is optimized to meet the requirements of the special vehicle driving system. The combination of the RS and BH algorithm is used to obtain high torque, low torque ripple and high efficiency.

The optimal spoke-type PM machine is obtained, and it has higher torque density, lower torque ripple, cogging torque and wider magnetic field weakening range. Finally, a 15-kW prototype machine is fabricated and tested to verify the results of the optimization method and finite-element analysis.

This paper designs a high torque density and efficiency spoke-type FSCW PM machine, which is superior for special vehicle driving systems. Meanwhile, the RS model combined with BH algorithm is applied to the field of electrical machine multi-objective optimal design.

This paper deals with the study of the influence of the phase shift between currents and back-electromotive forces (back-EMF) on torque ripple and radial magnetic forces for a low power synchronous machine supplied with 120 degrees square-wave currents. This paper aims to establish a good compromise between efficiency, harmonics of torque and harmonics of radial forces at the origin of the electromagnetic noise.

Based on a finite element approach, torque and magnetic pressure harmonics versus space and frequency are evaluated for different angle values. The evolutions of the different harmonics against the load angle are analyzed and compared to those of experimental measurements.

Depending on the load torque, field-weakening or field-boosting can be used to reduce current harmonics contributing the most to the radial magnetic forces responsible for the noise. Besides, a compromise can be found to avoid deteriorating too much the performances of the machine, thus being suitable with an industrial application.

This study concerns low power permanent magnet synchronous machines with concentrated windings and driven with a trapezoidal control, while having sinusoidal back-EMF.

The use of a simple mean and suitable with a large-scale manufacturing industry to reduce the identified electromagnetic-borne noise of a specific electric drive makes the originality.

The purpose of this paper is to propose the complementary design rules, give a quantitative comparison and analyze the force production mechanism of two kinds of primary wound field flux-switching linear (PWFFSL) motors.

PWFFSL motors have the merits of no use of rare-earth magnet, low cost and a wide operation range in which the armature windings and the field windings are all located at the short primary mover and the secondary is very robust. Hence, the PWFFSL motor is ideal for rail transportation systems which need a long stator and a wide speed range. To overcome the disadvantages of the existing PWFFSL motors, new complementary design rules will be proposed. Also, to offer a better PWFFSL motor for the rail transportation systems, it is necessary to investigate different structures of PWFFSL motors and give a comprehensive comparison. To predict the force performance of two kinds of PWFFSL motors with different secondary types, their flux density analysis and force production mechanism will be presented and compared.

The comparison result shows that the PWFFSL motor with toothed secondary can offer larger thrust force, higher force density and higher efficiency, whereas the PWFFSL motor with segmented secondary has the merits of lower force ripple, less use of stator iron, higher power factor and less critical saturation.

Many PWFFSL motors with different primary/secondary pole pitches based on the proposed design principle have not been considered in this paper.

This paper has presented the air-gap flux analysis, proposed the complementary design rules for two kinds of PWFFSL motors with different secondary types and compared the electromagnetic performance of the two motors.