Permanent magnet shaping for cogging torque and torque ripple reduction of PMSM

Abstract

Purpose

This paper aims to the improvement of permanent magnet shape in the popular permanent magnet synchronous machine (PMSM) is proposed in this paper in view to mitigate cogging torque magnitude and torque ripple.

Design/methodology/approach

A two-dimensional exact analytical approach of magnetic field distribution is established for the PMSM considering magnet shape and slot opening. The optimal magnet shape is constituted of small number of layers stacked radially. The thickness of each magnet layer is considered equal to about one mm or more; however, a parametric study was performed to determine pole pitch ratio value. The finite element method is used to validate the analytical results.

Findings

Cogging torque peaks and torque ripples can be mitigated significantly more than 90 per cent compared to results issued from machine having classical magnet shape. Raising the number of magnet layers can give better results. The results of this paper are compared also with those issued from the machine having sinusoidal magnet shape and give a good solution.

Originality/value

A new technique for cogging torque and torque ripple mitigation is proposed in this paper by changing permanent magnet shape. The proposed final magnet shape is constituted of a set of stacked and well-dimensioned layers relative to the opening angle.

Citation

Ladghem Chikouche, B., Boughrara, K. and Ibtiouen, R. (2018), "Permanent magnet shaping for cogging torque and torque ripple reduction of PMSM", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 37 No. 6, pp. 2232-2248. https://doi.org/10.1108/COMPEL-11-2017-0482