Search results

This paper aims to examine employee perceptions of the labor market in the employee turnover intention model and explores how different situations outside work (labor market conditions) play a role in employee-organizational membership. In addition, it also examines the mediating role of commitment in the relationship between stress and the turnover model.

Data were collected from 628 private school teachers working in the economically depressed state of J&K (India), which were randomly selected. Confirmatory factor analysis was used for validation of a scale. Structural equation modeling and PROCESS by Hayes was used to test the hypothesized relationships between the study variables.

The antecedents of occupational stressors contribute negatively toward employees’ psychological state resulting in undesirable employee-organizational relationships such as high turnover intentions and low organizational commitment. Nevertheless, lack of external job opportunities compels employees to maintain organizational membership, even though against the stressful working environment.

This study while acknowledging the inherent limitations, questionnaires are susceptible to and single sectional nature of the study poses limitations.

The practical implication explains that the employee and organization relationship is governed more by external economic conditions than by the psychological feelings of the employees toward the organization (organizational commitment). As also, the moral system of employees, as well as their feelings toward the noble profession makes them feel morally exalted and this binds them to the membership of the organization.

This study mainly focuses on, to understand if and how the conditions of the labor market relate to the employees’ attitudes. This would enable us to gain more insights to the systematic relations of employees’ attitudinal variables such as occupational stress, organizational commitment and employee turnover intentions.

Needs change as people get older. Procuring resources to satisfy them can generate anguish and insecurities in consumers due to their financial situation. This study aims to analyze the relationship between age and financial stress among Mexican adults and estimate the age of their maximum financial stress.

This study is based on constructing a financial stress indicator using the confirmatory factor analysis and linear regression models with a quadratic term, employing data from the National Survey on Financial Inclusion 2021.

Results show that the relationship between age and financial stress follows a quadratic pattern, with a maximum level at age 56, which varies according to sex, marital status, number of dependents, education and regions. These findings interest financial product designers and policy developers who aim to improve consumers' well-being.

Longitudinal studies and indicators, such as financial fragility, are needed to facilitate refining models over time.

There is no evidence of studies that have addressed the age of maximum financial stress in Latin America. Doing so is relevant because identifying the stages in life when adults are most vulnerable to financial stress helps assess its causes more precisely, thus mitigating its adverse effects.

This paper aims to critically investigate the liquidity risk management of Islamic banks and develop an alternative regulatory framework appropriate for liquidity management of these banks.

The specific risk profile of an Islamic bank requires developing a new and more efficient regulatory framework, which relies on risk- sharing and symmetric information among parties. The paper makes a differentiation between small local banks and internationally active Islamic banks and proposes to apply liquidity requirements only for internationally active Islamic banks.

A new proposal for the liquidity coverage ratio (LCR) of Islamic banks is developed in this paper towards mitigating risks and concurrently protecting the interests of investment account holders. Minimum and maximum thresholds are proposed for each liquid asset in this new LCR framework. An alternative liquidity approach is discussed to complement the proposal and several policy options are suggested.

As participation banks are exposed to market liquidity and market risks, more high-quality liquid instruments within a risk-sharing regulatory framework may provide the inner adjustment process through which any mismatch regarding maturity, risk, value or linkage with the real economy is corrected systematically. It offers policy implications for regulators, supervisors and international organizations.

In this study, the authors explore teachers' experiences of work during the pandemic using the analytic lens of technostress. More specifically, the authors investigate how the sudden transition to distance education induces technostress among teachers in relation to their teaching practice.

The data gathering method constitutes a questionnaire that explores how teachers' work situation was affected by shifting to distance education. 286 Swedish teachers answered the open-ended questionnaire.

The results demonstrate how technostress creators, technostress strains and teachers' coping strategies are expressed in teaching practice during an extreme case of digitalization.

The authors contribute to the work on technostress by suggesting the theoretical concept of “technorest” to shed light on alternative effects of the digitalization of work practice. Furthermore, the authors give examples of technorest creators which the authors term “techno-shields” and “techno-security”. The results could be interesting to enhance the understanding of the digitalization of work practices and cultivate a more favorable work situation.

All four propositions, assumptions (A), presumptions (P), suppositions (S), and presuppositions (PS), are, in general, part of human language and its usage, usually studied under the domain of linguistics. Critical thinking, as we understand in these volumes, is critical analysis of human language and its linguistics and narratives and arguments, which freely or spontaneously use A, P, S, and PS. These in turn are composed of signs, symbols (e.g., the alphabet) that bear meanings (semantics), messages and information (informatics), and motivation and persuasion via argumentation (pragmatics). We elaborate on these in this appendix.

Our major thesis here is the epistemological quasi necessity of A, P, S, and PS, which we freely and spontaneously use in linguistics, informatics, semantics, semeiotics, and pragmatics in our day-to day discussions, dialog, research, teaching, conversations, and conventional rationalizations. These can be both good from the viewpoint of transparency and honesty, opacity, and human exchange information asymmetry. They are dangerous since such A, P, S, and PS could be based on false dichotomies of man/Nature, male/female, truth/falsehood, objectivity/subjectivity, riches/poverty, equality/inequality, and the like; most of the negative aspects of such dichotomies are being used for self-serving, profit-maximizing, wealth-accumulating, poverty-perpetuating, and socially polarizing purposes. Human Anthropocene history is dotted with them, especially in the developmental context of industrialization and economic infrastructure development.

Hence, the vital necessity of critical thinking for critical self-examination, especially in current MBA curricula. All the three volumes of this book on critical thinking are expressly designed for this purpose.

Because of the anisotropy of the process and the variability in the quality of printed parts, finite element analysis is not directly applicable to recycled materials manufactured using fused filament fabrication. The purpose of this study is to investigate the numerical-experimental mechanical behavior modeling of the recycled polymer, that is, recyclable polyethylene terephthalate (rPET), manufactured by a deposition FFF process under compressive stresses for new sustainable designs.

In all, 42 test specimens were manufactured and analyzed according to the ASTM D695-15 standards. Eight numerical analyzes were performed on a real design manufactured with rPET using Young's compression modulus from the experimental tests. Finally, eight additional experimental tests under uniaxial compression loads were performed on the real sustainable design for validating its mechanical behavior versus computational numerical tests.

As a result of the experimental tests, rPET behaves linearly until it reaches the elastic limit, along each manufacturing axis. The results of this study confirmed the design's structural safety by the load scenario and operating boundary conditions. Experimental and numerical results show a difference of 0.001–0.024 mm, allowing for the rPET to be configured as isotropic in numerical simulation software without having to modify its material modeling equations.

The results obtained are of great help to industry, designers and researchers because they validate the use of recycled rPET for the ecological production of real-sustainable products using MEX technology under compressive stress and its configuration for numerical simulations. Major design companies are now using recycled plastic materials in their high-end designs.

Validation results have been presented on test specimens and real items, comparing experimental material configuration values with numerical results. Specifically, to the best of the authors’ knowledge, no industrial or scientific work has been conducted with rPET subjected to uniaxial compression loads for characterizing experimentally and numerically the material using these results for validating a real case of a sustainable industrial product.

Agricultural workers represent an important part of the population exposed to high heat-related health and productivity risks. This study aims to estimate the heat-related productivity loss (PL) for moderate work activities in sun and shady areas and evaluating the economic cost locally in an Italian farm and generally in the whole province of Florence. Benefits deriving by working in the shade or work-time shifting were provided. Comparisons between PL estimated in Mediterranean (Florence, Italy) and subtropical (Guangzhou, China) areas were also carried out.

Meteorological data were collected during summers 2017–2018 through a station installed in a farm in the province of Florence and by two World Meteorological Organization (WMO)‐certified meteorological stations located at the Florence and Guangzhou airports. These data were used to calculate the wet-bulb globe temperature and to estimate the hourly PL and the economic cost during the typical working time (from 8 a.m. to 5 p.m.) and by advancing of 1 h and 2 h the working time. Significant differences were calculated through nonparametric tests.

The hourly PL and the related economic cost significantly decreased (p < 0.05) by working in the shade and by work-time shifting. Higher PL values were observed in Guangzhou than in Florence. The decrease of PL observed by work-time shifting was greater in Florence than in Guangzhou.

Useful information to plan suitable heat-related prevention strategies to counteract the effects of heat in the workplace are provided. These findings are essential to quantify the beneficial effects due to the implementation of specific heat-related adaptation measures to counter the impending effects of climate change.

The purpose of this study was to identify and describe how students experience academic coaching in higher education in Norway.

The study employed a descriptive and exploratory qualitative design where semi-structured interviews formed the basis for data collection. Thematic analysis was used as an analytic strategy to identify, organise and find patterns or themes that emerged from the data.

The findings showed that academic coaching positively influenced the respondents' ability to identify the necessary and efficient cognitive processes and metacognitive skills needed to cope with everyday scholastic challenges. Academic coaching affected the respondents' metacognitive skills and cognitive processes in terms of evolving their self-efficacy, self-awareness, self-regulation, motivation, stress identification, goal identification, goal setting and development of new strategies.

The findings in this study reflect the respondents' subjective opinions and further research is needed to validate these findings.

This article addresses a gap in the field of research by offering a descriptive pilot study and thematic analysis of students' experiences with academic coaching in Norway.

Within the context of 2D square lattices, searching for the existence of band gaps assumes a great interest owing to many possible fields of application: from energy absorption devices to noise and vibration controllers, as well as advanced strategies for the seismic isolation.

The underlying microstructure may influence the mechanical response of 2D square lattices according to a complex interplay between different factors. A first one is related to the so-called “size-effect”. A second one relates, instead, to the mass density distribution.

It has been observed that lumped masses may induce additional band gaps to appear and may magnify their width. Finally, an additional factor deals with the inner damping characteristics of the constituent materials, which usually are polymer-based.

This study focuses on the first factor from a specific perspective: to investigate the influence of the size effect on the existence and properties of frequency band gaps.

This study aims to examine the individual and contextual predictors of managerial attitudes toward employees with chronic depression (EwCD) in the hospitality and tourism field, the relationship between managerial attitudes toward EwCD and levels of organizational citizenship behavior, and the mediating role of personality in this relationship.

Empirical data were collected through an online survey of 305 managers working in the hospitality and tourism industry in the USA. SmartPLS 3 software was used to conduct a partial least squares-structural equation modeling analysis.

Organizational and individual characteristics of managers, such as pressure to be productive in the workplace, previous experience with depression, levels of anxiety and personality characteristics, are strong predictors of attitudes toward employees with depression. Personality mediates the effect of managers’ attitudes toward organizational citizenship behavior.

The study provided support that managers who have experienced depression are more understanding of the needs of EwCD and, consequently, can reduce related stigma in the workplace. Likewise, open and agreeable managers who do not feel the constant pressure to showcase high performance and who score low on anxiety and high on organizational citizenship behavior can create a safe working environment free from prejudice and discrimination toward EwCD.

Examining depression in the hospitality and tourism industry becomes even more critical as mental health issues are increasing in the workplace. This research contributes to the hospitality and tourism literature, which seldom investigates managerial perspectives of mental illness and sheds light on the desirable managerial personality traits necessary for creating an inclusive workplace.