Search results
1 – 10 of over 2000Nagahanumaiah and B. Ravi
The purpose of this paper is to present the results of an investigation into the effect of injection molding process parameters on the performance of direct metal laser sintered…
Abstract
Purpose
The purpose of this paper is to present the results of an investigation into the effect of injection molding process parameters on the performance of direct metal laser sintered (DMLS) mold in producing quality Zytel nylon 66 plastic parts with consistency in part shrinkage and shot/part weight.
Design/methodology/approach
The injection mold for an industrial component (hub gear) was fabricated in EOS M‐250 machine using bronze‐based material. The effect of four injection molding parameters (injection pressure, melt temperature, speed, and injection time) on part shrinkage and weight were studied experimentally using L9 orthogonal array. The weight of the part just after ejecting from the cavity, and the average shrinkage measured after cooling, were used in grey relational analysis technique to assess the effect of each molding parameter. Further, surface properties such as surface finish, wear, scratch and corrosion resistance tests were conducted on DMLS mold material samples, in order to evaluate its use in rapid manufacturing applications.
Findings
The study found that injection speed and melt temperature have significant influence on part weight and shrinkage. The optimized molding process variables were slightly more in the case of DMLS molds as compared with the parameters suggested in the plastic datasheet. Scanning electro microscope (SEM) analysis of the mold surface after producing 5,000 glass filled Nylon 66 (Zytel) moldings did not indicate any surface degradation, confirming the use of DMLS mold in rapid manufacturing of few thousands of moldings.
Research limitations/implications
The grey relational analysis does not compute the effect of any two or more variables together unlike ANNOVA. Second, this study alone is not enough to estimate life of DMLS mold, although 5,000 glass filled nylon 66 moldings are successfully produced without any damage on mold surface.
Practical implications
This investigation demonstrates a generic approach of using grey relational analysis to quantify the effect of different molding process variables on selected quality parameters. This method can be easily extended for new processes and materials. The preliminary tests on surface finish, scratch, wear and corrosion resistance performed on DMLS mold samples have highlighted the need for improving surface properties to enhance their life. The authors are currently working on hard coating of DMLS molds as one of the solutions.
Originality/value
Use of grey relational analysis is new to the problem of injection molding process optimization. Moreover, effect of injection molding parameters on part weight and shrinkage in DMLS mold has not been studied previously. This study helps while considering DMLS molds for manufacturing few thousands of parts.
Details
Keywords
This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder…
Abstract
This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.
Details
Keywords
Rajitha Aluru, Michael Keefe and Suresh Advani
Injection molding is a very mature technology, but the growth of layer‐build, additive, manufacturing technologies (rapid prototypying) has the potential of expanding injection…
Abstract
Injection molding is a very mature technology, but the growth of layer‐build, additive, manufacturing technologies (rapid prototypying) has the potential of expanding injection molding into areas not commercially feasible with traditional molds and molding techniques. This integration of injection molding with rapid prototyping has undergone many demonstrations of potential. What is missing is the fundamental understanding of how the modifications to the mold material and mold manufacturing process impact both the mold design and the injection molding process. This work expanded on an approach to utilize current numerical simulation programs and created a tool for optimizing the creation and use of non‐metal molds for injection molding. Verification and validation work is presented. The model was exercised by studying the effect of varying the thermal conductivity on final‐part distortions. This work clearly showed that one could not obtain reasonable results by simply changing a few input parameters in the current simulations. Although the approach did produce more realistic results, more work will be required for a tool capable of accurate, quantitative predictions.
Details
Keywords
R.V. Nambiar, K.H. Lee and D. Nagarajan
The purpose of this work is to extend the life of plastic injection molds made by stereolithography through the use of gas‐assist technology.
Abstract
Purpose
The purpose of this work is to extend the life of plastic injection molds made by stereolithography through the use of gas‐assist technology.
Design/methodology/approach
Polypropylene parts were made by injection molding in stereolithography molds with and without gas‐assist technology. The mold life was evaluated by observing the number of parts produced before the breakage of each of small core pins and the ejection force was measured.
Findings
When using gas‐assisted injection molding (GAIM), the core pin life was approximately doubled, the average cavity pressure and the average mold temperature were reduced, and there was a three‐fold increase in ejection force. Also, the core pin location had a very dramatic effect on the life.
Research limitations/implications
This study suggests research into understanding the relationship between ejection force and mold failure, testing the mechanical properties of the parts and identifying reliable design rules for parts produced by GAIM. Research into other low pressure injection techniques and the viability of using a wider set of polymer materials also appears promising.
Practical implications
The result of this research encourages molders who have abandoned the use of stereolithography tools after a few unsuccessful attempts to consider using GAIM with stereolithography molds.
Originality/value
This is a novel use of GAIM technology to extend the lives of molds fabricated by stereolithography.
Details
Keywords
S.S.S. Imihezri, S.M. Sapuan, S. Sulaiman, M.M. Hamdan and E.S. Zainudin
This paper presents the simulation results of a glass fiber reinforced PA 6,6 composite automotive clutch pedal. The analysis is carried out using Moldflow Plastics Insight (MPI…
Abstract
This paper presents the simulation results of a glass fiber reinforced PA 6,6 composite automotive clutch pedal. The analysis is carried out using Moldflow Plastics Insight (MPI) software to investigate the effects of increasing gate number from 1 to 2 on temperature and pressure. The results of temperature show that for single gate, the temperature was 291.3 °C and for double gate was 292.3 °C. Double gates mold induce higher temperature due to longer runner length. Both designs revealed different hot spots locations indicating probable areas of excess shear heating. The results of pressure (end of fill), for the single gate it was 61.31 MPa and for double gate was 60.73 MPa. Double gates mold reduce the required injection pressure as well as pressure variation, hence a lower volumetric shrinkage. Lower injection pressure produces lower shear rate and shear stress level.
Details
Keywords
Werner Timans, Kees Ahaus and Jiju Antony
The purpose of this paper is to provide a demonstration of the application of techniques for robust optimization for improvement of the injection moulding processes in an injection…
Abstract
Purpose
The purpose of this paper is to provide a demonstration of the application of techniques for robust optimization for improvement of the injection moulding processes in an injection moulding small and medium sized enterprise (SME).
Design/methodology/approach
A critical to quality characteristic (CtQ) which is connected to assembly problems is the subject of investigation. The CtQ is not directly measurable. The variation in a dimension of a product, which is correlated to the CtQ, is studied using design of experiments (DoE) and Taguchi methods. A two-cavity mould is used in the injection moulding process. To evaluate the robustness of the process using signal-to-noise analysis, the data were transformed to compensate for the systematic differences between the mould cavities.
Findings
The initial results showed that finding optimal process parameter settings commonly valid for both cavities was impossible. After a modification of the mould, the experiments were rerun and optimal settings could be found.
Practical implications
Applying DoE techniques in small and medium-sized injection moulding companies is far from common practice. This case study demonstrates a method to apply DoE with five process parameters which can serve as a standard method to prepare production when a new mould is used for the first time.
Originality/value
The originality is connected to the combination of the applied methods and, in the context of the case study, carried out in an SME unfamiliar with the power of the applied methods. The value of the paper is to demonstrate the power of the most powerful technique in quality engineering to improve an injection moulding process within the context of SMEs. The authors would accentuate the point that the true power becomes visible when this powerful technique is introduced into an organization with very little understanding of the technique. In addition, the case study is valuable to practitioners because it proposes a new scientific and systematic approach to understand and optimize the start-up of the moulding process.
Details
Keywords
Anurag Bagalkot, Dirk Pons, Don Clucas and Digby Symons
Polymer rapid tooling (PRT) inserts can be used as injection moulding (IM) cavities for prototyping and low volume production but lack the robustness of metal inserts. Metal…
Abstract
Purpose
Polymer rapid tooling (PRT) inserts can be used as injection moulding (IM) cavities for prototyping and low volume production but lack the robustness of metal inserts. Metal inserts can withstand high injection pressure and temperature required, whereas PRT inserts may fail under similar parameters. The current method of parameter setting starts with using the highest pressure setting on the machine and then fine-tuning to optimize the process parameters. This method needs modification, as high injection pressures and temperatures can damage the PRT inserts. There is a need for a methodical process to determine the upper limits of moulding parameters that can be used without damaging the PRT inserts.
Design/methodology/approach
A case study analysis was performed to investigate the causes of failure in a PRT insert. From this, a candidate set-up process was developed to avoid start-up failure and possibly prolong tool life. This was then tested on a second mould, which successfully avoided start-up failure and moulded 54 parts before becoming unusable due to safety issues.
Findings
Process parameters that are critical for tool life are identified as mould temperature, injection pressure, injection speed, hold pressure and cooling time.
Originality/value
This paper presents a novel method for setting IM process parameters for PRT inserts. This has the potential to prevent failure at start up when using PRT inserts and possibly extend the operating life of the PRT inserts.
Details
Keywords
Radhwan Bin Hussin, Safian Bin Sharif, Shayfull Zamree Bin Abd Rahim, Mohd Azlan Bin Suhaimi, Mohd Tanwyn Bin Mohd Khushairi, Abdellah Abdellah EL-Hadj and Norshah Afizi Bin Shuaib
Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype…
Abstract
Purpose
Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype applications, especially in the development of new products. The purpose of this study is to analyze the current application trends of RT techniques in producing hybrid mold inserts.
Design/methodology/approach
The direct and indirect RT techniques discussed in this paper are aimed at developing a hybrid mold insert using metal epoxy composite (MEC) in increasing the speed of tooling development and performance. An extensive review of the suitable development approach of hybrid mold inserts, material preparation and filler effect on physical and mechanical properties has been conducted.
Findings
Latest research studies indicate that it is possible to develop a hybrid material through the combination of different shapes/sizes of filler particles and it is expected to improve the compressive strength, thermal conductivity and consequently increasing the hybrid mold performance (cooling time and a number of molding cycles).
Research limitations/implications
The number of research studies on RT for hybrid mold inserts is still lacking as compared to research studies on conventional manufacturing technology. One of the significant limitations is on the ways to improve physical and mechanical properties due to the limited type, size and shape of materials that are currently available.
Originality/value
This review presents the related information and highlights the current gaps related to this field of study. In addition, it appraises the new formulation of MEC materials for the hybrid mold inserts in injection molding application and RT for non-metal products.
Details
Keywords
Only continuously monitoring cavity pressure allows the detailed recording of the injection molding process in the injection, compression and holding pressure phases. It alone…
Abstract
Only continuously monitoring cavity pressure allows the detailed recording of the injection molding process in the injection, compression and holding pressure phases. It alone correlates with all significant molding features such as weight, morphology, degree of forming, burr formation, shrink marks and cavities as well as shrinkage and deformation. The cavity pressure not only optimizes the timing of the switching point from the compression to the holding pressure phase, but also serves directly as a criterion for the switching. Molding weights and countless other quality characteristics thereby vary considerably less than with switching based on hydraulic pressure, screw travel or time. Quartz sensors have proved particularly successful for direct and indirect measurement of pressure. Advocates the use of cavity pressure sensors for monitoring and control of the injection molding process and describes commercial products that are available.
Details
Keywords
M. Grujicic, G. Arakere, P. Pisu, B. Ayalew, Norbert Seyr, Marc Erdmann and Jochen Holzleitner
Application of the engineering design optimization methods and tools to the design of automotive body‐in‐white (BIW) structural components made of polymer metal hybrid (PMH…
Abstract
Application of the engineering design optimization methods and tools to the design of automotive body‐in‐white (BIW) structural components made of polymer metal hybrid (PMH) materials is considered. Specifically, the use of topology optimization in identifying the optimal initial designs and the use of size and shape optimization techniques in defining the final designs is discussed. The optimization analyses employed were required to account for the fact that the BIW structural PMH component in question may be subjected to different in‐service loads be designed for stiffness, strength or buckling resistance and that it must be manufacturable using conventional injection over‐molding. The paper demonstrates the use of various engineering tools, i.e. a CAD program to create the solid model of the PMH component, a meshing program to ensure mesh matching across the polymer/metal interfaces, a linear‐static analysis based topology optimization tool to generate an initial design, a nonlinear statics‐based size and shape optimization program to obtained the final design and a mold‐filling simulation tool to validate manufacturability of the PMH component.
Details