Search results

In this study, the removal of a series of acid dyes by hybrid polymer adsorbent was investigated. Textile industry wastewater is mainly consisted of suspended solid particles and organic compounds with complex and nondecomposable structures. Treatment of such wastewaters has received much attention by researchers because of high water consumption and the presence of various chemical compounds, especially dyes. The use of polymers has recently attracted much attention for the treatment of textile wastewaters. According to the literature, hybrid polymers are highly capable of adsorbing dyes. In this research work, polyacrylamide/iron sulfate (PAM-FeSO₄) hybrid polymer was successfully synthesized through solution polymerization of acrylamide with ammonium persulfate and sodium thiosulfate and gradual addition of iron sulfate. The hybrid polymeric adsorbent was then used for removing acidic dyes with different chemical structures.

The effects of various experimental conditions and parameters, such as initial concentrations of dye and adsorbent, on the adsorption capacity of the adsorbent were investigated. The dye concentration was measured by an UV–vis spectrophotometer. The adsorption equilibrium was studied by plotting adsorption isotherms. The experimental data was fitted to Langmuir and Freundlich isotherms.

The adsorption experiments indicated that the PAM-FeSO₄ hybrid polymer has a high adsorption capacity (117.64 mg g⁻¹ for the Orange ІІ and 80.64 mg g⁻¹ for the Sunset Yellow [SY]) when 80 mg of adsorbent was immersed in the dye solution (1 g L⁻¹) with a pH of 11 at 25°C. The analysis of the equilibrium isotherms using the Langmuir and Freundlich isotherms indicated that the Langmuir model fit well to the experimental data.

To the best of the authors’ knowledge, this study is original. The removal of acid dyes such as Sunset Yellow and Methyl Orange using PAM-FeSO₄ hybrid polymer as flocculant was done for the first time.

Methylene blue (MB) is classified as a cationic dye which is widely used as chemical indicator, coloring agent and biological stain. The discharge of this dye to the water streams is harmful to the human beings. For this reason, this study investigated the removal of MB from aqueous solution by hydrogel nanocomposite.

In experimental part, at first, ultraviolet (UV)-curable hydrogel/chitosan nanocomposite, which improves its elasticity by urethane acrylate, was synthesized and characterized by FTIR and SEM analysis. Afterward, the synthesized hydrogel nanocomposite was applied for the removal of MB and the influence of operational condition including nanocomposite loading, dye concentration, contact time and pH of solution was specified. Moreover, isotherm studies as well as kinetics survey were performed.

Langmuir, Freundlich, Brunauer, Emmett and Teller and Tempkin adsorption isotherms were assessed for the analysis of experimental data indicating the Freundlich isotherm was the best fitted one. The adsorption kinetics data was examined indicating the adsorption kinetics appropriate to pseudo-second-order kinetics model.

The predominant water absorption property of the UV-curable hydrogel/chitosan nanocomposite to 8.5 steps and outstanding adsorption capacity for the elimination of MB on hydrogel nanocomposite subscribed that the synthesized hydrogel could be a favorable adsorbent for simultaneous absorption of water and removal of cationic dyes.

The disposal of wastewater containing silver is an environmental concern. Due to the toxicity of silver, treatment of such wastewater is necessary. Real wastewater contains a complex matrix of pollutants. The purpose of this paper is to study the adsorption behavior of silver in single and binary systems (with nickel) onto granular activated carbon.

The effect of silver ions concentration and the mass of adsorbent on the adsorption behavior were analyzed. Five two-parameter isotherms (Langmuir, Elovich, Freundlich, Dubinin–Radushkevich and Temkin) were applied to investigate the adsorption mechanism. Both linear and nonlinear regressions were tested for the first three isotherms. The experimental data were also fitted to Redlich–Petersons, Sips and Toth models.

A direct relationship between the initial silver ion concentration and its adsorption capacity was observed, whereas an inverse relationship between the adsorbent mass and the adsorption capacity was documented. The Langmuir model was found to best-fit the data indicating monolayer adsorption behavior. The maximum uptake was 2,500 mg/g in the single adsorption system. This value decreased to 909 mg/g in the binary system. The adsorption was found to have an exothermic chemical nature.

The study of the silver adsorption in a single system is inaccurate. Real wastewater contains a complex matrix of pollutants. This research gives a clear insight into the adsorption behavior in binary systems.

The purpose of this study was to the synthesis of Fe₃O₄@SiO₂ nanocomposites and using it as an adsorbent for removal of diazinon from aqueous solutions. Structural characteristics of the synthesized magnetic nanocomposite were described by Fourier transform infrared spectroscopy and scanning electron microscopy.

The effects of different parameters including pH (2-10), contact time (1-180 min), adsorbent dosage (100-2000 mg L⁻¹) and initial diazinon concentration (0.5–20 mg L⁻¹) on the removal processes were studied. Finally, isotherm and kinetic and of adsorption process of diazinon onto Fe₃O₄@SiO₂ nanocomposites were investigated.

The maximum removal efficiency of diazinon (96%) was found at 180 min with 1000 mg L⁻¹ adsorbent dosage using 0.5 mg L⁻¹ diazinon concentration at pH = 7. The experimental results revealed that data were best fit with the pseudo-second-order kinetic model (R² = 0.971) and the adsorption capacity was 10.90 mg g⁻¹. The adsorption isotherm was accordant to Langmuir isotherm.

In the present study, the magnetic nanocomposites were synthesized and used as an absorbent for the removal of diazinon. The developed method had advantages such as the good ability of Fe₃O₄@SiO₂ nanocomposites to remove diazinon from aqueous solution and the magnetic separation of this absorbent that make it recoverable nanocomposite. The other advantages of these nanocomposites are rapidity, simplicity and relatively low cost.

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Sodium silicate is adopted as a substrate for GO and AgNPs with positive charge are used as modifiers. The synthesized nanocomposite is characterized by FTIR, FESEM, EDS, BET and XRD techniques. Then, some of the most effective parameters on the removal of CR and MB dyes such as solution pH, sorbent dose, adsorption equilibrium time, primary dye concentration and salt effect are optimized using the spectrophotometry technique.

The authors successfully achieved notable maximum adsorption capacities (Qmax) of CR and MB, which were 41.15 and 37.04 mg g⁻¹, respectively. The required equilibrium times for maximum efficiency of the developed sorbent were 10 and 15 min for CR and MB dyes, respectively. Adsorption equilibrium data present a good correlation with Langmuir isotherm, with a correlation coefficient of R2 = 0.9924 for CR and R2 = 0.9904 for MB, and kinetic studies prove that the dye adsorption process follows pseudo second-order models (CR R2 = 0.9986 and MB R2 = 0.9967).

The results showed that the proposed mechanism for the function of the developed sorbent in dye adsorption was based on physical and multilayer adsorption for both dyes onto the active sites of non-homogeneous sorbent.

The as-prepared nano-adsorbent has a high ability to remove both cationic and anionic dyes; moreover, to the high efficiency of the adsorbent, it has been tried to make its synthesis steps as simple as possible using inexpensive and available materials.

Purpose – The purpose of this paper to immobilization provides biosorbent particle with density and mechanichal strength, immobilization can save the cost of separating from biomass, can be regeneration and to increase adsorption capacity for metal ions.

Design/Methodology/Approach – The parameters affecting the adsorption, such as initial metal ion concentration, pH, contact time, and temperature, were studied. The analysis of biosorbent functional group was carried out by Fourier Transform Infrared Spectroscopy, SEM-EDX, for elemental analysis.

Findings – Optimum pH condition for biosorption Cd(II) was pH 5, contact time was 45 min, and initial concentration was 250 mg/L. Biosorbent analysis was characterized using SEM-EDX and FTIR analysis. Kinetics adsorption was studied and analyzed in terms of the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The result showed that the biosorption for Cd(II) ion followed the pseudo-second-order kinetic model. Biosorption data of Cd(II) ion at 300°K, 308°K, and 318°K was analyzed with Temkin, Langmuir, and Freundlich isotherms. Biosorption of Cd(II) by durian seed immobilization in alginate according to the Langmuir isotherm equation provided a coefficient correlation of r² = 0.939 and maximum capacity biosorption of 25.05 mg/g.

This study aims to observe the coloring efficacy of graphite (G) and nano bentonite clay (BCNPs) on the adsorption of Basic Blue 5 dye from residual dye bath solution.

Some factors that affected the adsorption processes were examined and found to have significant impacts on the adsorption capacity such as the initial concentration of G and/or BCNPs (Co: 40–2,320 mg/L), adsorbent bath pH (4–9), shaking time (30–150 min.) and initial dye concentration (40–200 mg/L). The adsorption mechanism of dye by using G and/or BCNPs was studied using two different models (first-pseudo order and second-pseudo order diffusion models). The equilibrium adsorption data for the dye understudy was analyzed by using four different models (Langmuir, Freundlich, Temkin modle and Dubinin–Radushkevich) models.

It has been found that the adsorption kinetics follow rather a pseudo-first-order kinetic model with a determination coefficient (R²) of 0.99117 for G and 0.98665 for BCNPs. The results indicate that the Freundlich model provides the best correlation for G with capacities q_max = 2.33116535 mg/g and R² = 0.99588, while the Langmuir model provides the best correlation for BCNPs with R² = 0.99074. The adsorbent elaborated from BCNPs was found to be efficient and suitable for removing basic dyes rather than G from aqueous solutions due to its availability, good adsorption capability, as well as low-cost preparation.

There is no research limitation for this work. Basic Blue 5 dye graphite (G) and nano bentonite clay (BCNPs) were used.

This work has practical applications for the textile industry. It is concluded that using graphite and nano bentonite clay can be a possible alternative to adsorb residual dye from dye bath solution and can make the process greener.

Socially, it has a good impact on the ecosystem and global community because the residual dye does not contain any carcinogenic materials.

The work is original and contains value-added products for the textile industry and other confederate fields.

To treat water pollution, especially the contamination resulted from organic dyes has aroused significant attention around the world, this study aims to prepare the metal organic framework (MOF) materials hybridizing with poly(p-phenylene terephthalamide) (PPTA) by means of a facile refluxing method and to systematically investigate adsorption performance for anionic dye Congo red as target molecule from aqueous solution.

The MOF materials hybridized by PPTA were fabricated by virtue of a facile refluxing method, characterized by thermogravimetric analysis, X-ray powder diffraction, Fourier transform infrared and pore structure.

The results showed that pseudo-second-order kinetic model could better describe the adsorption process for all the four materials, whereas Elovich model also fitted the process for the hybrid materials with PPTA. Adsorption isotherm analyses indicated that Langmuir isotherm could be used to describe the adsorption process. Introduction of appropriate amount of PPTA could enhance the adsorption affinity of the MOF materials for Congo red, and the maximum adsorption capacity could reach as high as 1,053.41 mg/g while that of the MOF material without PPTA was 666.67 mg/g, indicating introduction of PPTA could change the microenvironment of the MOF materials and increase the adsorption sites, leading to high adsorption efficiency.

The microstructure of MOF hybridized materials in detail is the further and future investigation.

This study will provide a method to prepare MOF materials with high efficiency to treat anionic dyes like Congo red from aqueous solution.

Owing to the special characteristics of PPTA and similar to carbon tube, PPTA was introduced into MOF material to increased corresponding water stability. Because of aromatic ring and amide group on the surface of PPTA, the adsorption efficiency of the hybridized MOF material with appropriate amount of PPTA was greatly enhanced.

The purpose of this study is to focus on the preparation of macroporous adsorption resins (MARs) functionalized with carbazole and N-methylimidazole, and adsorption behaviors of (–)-epigallocatechin gallate (EGCG) and caffeine (CAF) on the functionalized MARs.

Based on the Friedel–Crafts and amination reactions, novel MARs functionalized with carbazole and N-methylimidazole were synthesized and characterized by the BET method. Accordingly, adsorption behaviors and structure-activity relationships for EGCG and CAF were studied in detail.

The results showed that pseudosecond-order kinetic model was provided with a better correlation for the adsorption of EGCG and CAF onto L-1 and L-2, and pseudofirst-order kinetic model was the most suitable model to illustrate the adsorption process for EGCG and CAF on L-3. The result indicated that Langmuir, Freundlich, Temkin–Pyzhev and Dubinin–Radushkevich isotherms all could better illustrate the adsorption processes of EGCG and CAF on L-1, L-2 and L-3.

This study provides theoretical guidance and technical support for the efficient separation and purification of EGCG and CAF from waste tea leaves by MARs on a large scale. In addition, the results showed that this novel MARs would provide useful help and be used in large-scale production of active ingredients from natural products in the industry and other fields.

Adsorption kinetic models such as pseudofirst-order, pseudosecond-order and intra-particle diffusion kinetic models, and adsorption isotherm models such as Langmuir, Freundlich, Temkin–Pyzhev and Dubinin–Radushkevich isotherms models were adopted to illustrate the adsorption mechanisms of EGCG and CAF. The main driving forces for MARs with no functional groups were pore sieving effects, p–p conjugation effects and hydrophobic interactions, and the other significant driving forces for MARs functionalized with carbazole and N-methylimidazole were electrostatic interactions, ion-dipole and hydrogen bonding interactions. This study might provide scientific references and useful help for large-scale separating and enriching active ingredients in natural products using the technology of MARs with special functional groups.

The purpose of this paper is to harness the potential of microwave pre-treatment to prepare carbon from locally available Sterculia foetida fruit shells for adsorption of heavy metals, particularly Nickel ions (Ni++), from effluent.

The pre-treatment methods comprise conventional methods as sun drying and oven drying as well as high intensity microwave drying. Response surface methodology was employed to analyse the optimization of the process. The adsorption behavioural characteristics of the material were established applying adsorption isotherms.

Adsorption of Ni++ was found to be effective in microwave drying at output power of 300 W. It was observed that the maximum adsorption capacity was attained at pH 6; an adsorbent dosage of 0.25 mgml−1 and initial metal ion concentration of 20 ppm with an interactive effect of initial concentration and dosage.

The research puts emphasise on prospecting of novel biomass for carbonization and application of the same for effective adsorption. Available literature on Sterculia foetida is very limited and this work will serve to create database on the amenability of processing.