Search results
1 – 10 of 813K. Kadirgama, K.A. Abou‐El‐Hossein, B. Mohammad and H. Habeeb
The Finite Element Method and Response Surface Method are used to find the effect of milling parameters (Cutting speed, Feedrate and Axial depth) on plastic strain when milling…
Abstract
The Finite Element Method and Response Surface Method are used to find the effect of milling parameters (Cutting speed, Feedrate and Axial depth) on plastic strain when milling Hastelloy C‐22HS. This simulation gain more understanding of the strain distribution in metal cutting. Response surface method (RSM) has been used to minimize the number of simulation. The contour plot from the RSM shows the relationship between variables (cutting speed, feedrate and axial depth) and response (plastic strain ‐ rate).The friction interaction along the tool‐chip interface is modeled with Coulomb friction law.
Details
Keywords
This paper gives a review of the finite element techniques (FE)applied in the area of material processing. The latest trends in metalforming, non‐metal forming and powder…
Abstract
This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.
Details
Keywords
This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder…
Abstract
This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.
Details
Keywords
Song Zhang, Dalong Yi, Hui Zhang, Lili Zheng, Yuduo Zhang, Zhigang Yang and Mark Norfolk
The purpose of this paper is to identify the key parameters that control the bonding formation of foils by the ultrasonic consolidation (UC) process and to build the correlations…
Abstract
Purpose
The purpose of this paper is to identify the key parameters that control the bonding formation of foils by the ultrasonic consolidation (UC) process and to build the correlations among process operating conditions and key control parameters through the concept of “process map”.
Design/methodology/approach
The concept of “process map” is proposed based on the diffusion bonding mechanism for the UC process, and numerical simulations have been applied to the UC process to predict peak temperature and plastic strain at the contact interface by considering a wide range of process operating conditions.
Findings
This map reveals that the formation of bonding among foils by the UC process requires a good match between temperature and plastic deformation at the contact interface. This limits the process operating window to a narrow region in the strain – temperature coordinate system.
Originality/value
This work has identified the underlying mechanism for bonding formation and the key control parameters of the UC process. The concept of “process map” for the UC process was developed, which allows the process optimization through two critical process control parameters of temperature and plastic strain at the contact interface instead of five operating conditions.
Details
Keywords
G. Yoganjaneyulu, V.V. Ravikumar and C. Sathiya Narayanan
The purpose of this paper is to investigate the strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental…
Abstract
Purpose
The purpose of this paper is to investigate the strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental forming (SPIF) process, with various computerized numerical control (CNC) spindle rotational speeds and step depths. The development of corrosion pits in 3.5 (%) NaCl solution has also been studied during the SPIF process.
Design/methodology/approach
A potentiodynamic polarization (PDP) study was performed to investigate the corrosion behaviour of titanium Grade 2 deformed samples, with various spindle rotational speeds in 3.5 (%) NaCl solution. The scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis was carried out to study the fracture behaviour, dislocation densities and corrosion morphology of deformed samples.
Findings
The titanium Grade 2 sheets exhibited better strain distribution, fracture limit and corrosion resistance by increasing the CNC spindle rotational speeds, tool diameters and vertical step depths (VSD). It was recorded that varying the spindle speed affected plastic deformation which in turn affected corrosion rate.
Research limitations/implications
In this study, poor corrosion rate was observed for the as-received condition, and better corrosion rate was achieved at maximum speed of 600 rpm and 0.6 mm of VSD in the deformed sheet. This indicates that corrosion rate improved with increase in the plastic deformation. The EDS analysis report of corroded surface revealed the composition to be mainly of titanium and oxides.
Practical implications
This study discusses the strain distribution, stress-based fracture limit and corrosion behaviour by using titanium Grade 2 sheets during SPIF process.
Social implications
This study is useful in the field of automobile and industrial applications.
Originality/value
With an increase in the spindle rotational speeds and VSD, the titanium Grade 2 sheets showed better strain distribution, fracture limit and corrosion behaviour; the same is evidenced in fracture limit curve and PDP curves.
Details
Keywords
Yajun Dai, Chang Liu, Min Zhan, Xiangyu Wang, Chao He and Qingyuan Wang
The investigations provide a basis for the optimization of the alloy 6061-T6 friction stir welding (FSW) process to improve the mechanical properties of welded joints.
Abstract
Purpose
The investigations provide a basis for the optimization of the alloy 6061-T6 friction stir welding (FSW) process to improve the mechanical properties of welded joints.
Design/methodology/approach
The local deformation of the FSW joint in tension and fatigue test were experimentally investigated by digital image correlation (DIC) technique.
Findings
The local stress-strain behaviors of the sub-regions show that the plastic strain always concentrated at the heat affected zone (HAZ) on the advancing side both in tension and high cycle fatigue and eventually leads to the final fracture. The evolution of the plastic strain at very low stress is extremely slow and accounts for most of the total fatigue life. However, the local deformation exhibits a sudden increase just before the fatigue failure.
Originality/value
Based on the experimental data, the result indicates that the HAZ is the weakest zone across the weld and the strain localization in high cycle fatigue is very harmful and unpredictable for the FSW joints.
Details
Keywords
Archana Rethinam, Vinoo D. Shivakumar, L. Harish, M.B. Abhishek, G.V. Ramana, Madhusudana R., R. Sah and S. Manjini
The application of new technologies requires, however, modern rolling mills. Indeed, in manufacturing plants of older types, strict compliance with the developed rolling regimes…
Abstract
Purpose
The application of new technologies requires, however, modern rolling mills. Indeed, in manufacturing plants of older types, strict compliance with the developed rolling regimes is not always feasible. Improving the mechanical properties in such cases is possible only by means of cooling. Compressive deformation behavior of carbon–manganese (C-Mn) grade has been investigated at temperatures ranging from 800-900°C and strain rate from 0.01-50 s−1 on Gleeble-3800, a thermo-mechanical simulator. Simulation studies have been conducted mainly to observe the microstructural changes for various strain rate and deformation temperatures at a constant strain of 0.5 and a cooling rate of 20°C s−1.
Design/methodology/approach
The project begins with simulation of a hot rolling condition using the thermo-mechanical simulator; this was followed by microstructural examination and identification of phases present by using an optical microscope for hot-rolled coil and simulated samples; grain size measurement and size distribution studies; and optimization of finishing temperature, coiling temperature and cooling rate by mimicking plant processing parameters to improve the mechanical properties.
Findings
As the strain rate and temperature increase, pearlite banding decreases gradually and finally gets completely eliminated, thereby improving the mechanical properties. True stress–strain curves were plotted to extrapolate the effect of strain-hardening and strain rate sensitivity on austenite (γ) and austenite–ferrite (γ-a) regions. To validate the effect of strain rate and temperature over the grain size, the hardness of simulated samples was measured using the universal hardness tester and the corresponding tensile strength was found from the standard hardness chart.
Practical implications
The results of the study carried out have projected a new technology of thermo-mechanical simulation for the studied C-Mn grade. These results were used to optimize the plant processing parameter like finishing and coiling temperature and finishing stands strain rate.
Originality/value
By controlling the hot rolling conditions like finishing, coiling temperature and cooling rate, structures differing in mechanical properties can be obtained for the same material. Accurate understanding of a structure being formed when different temperatures are applied enables the control of the process that assures intended structures and mechanical properties are achieved.
Details
Keywords
Dylan Agius, Kyriakos I. Kourousis and Chris Wallbrink
The purpose of this paper is to examine the mechanical behaviour of additively manufactured Ti-6Al-4V under cyclic loading. Using as-built selective laser melting (SLM) Ti-6Al-4V…
Abstract
Purpose
The purpose of this paper is to examine the mechanical behaviour of additively manufactured Ti-6Al-4V under cyclic loading. Using as-built selective laser melting (SLM) Ti-6Al-4V in engineering applications requires a detailed understanding of its elastoplastic behaviour. This preliminary study intends to create a better understanding on the cyclic plasticity phenomena exhibited by this material under symmetric and asymmetric strain-controlled cyclic loading.
Design/methodology/approach
This paper investigates experimentally the cyclic elastoplastic behaviour of as-built SLM Ti-6Al-4V under symmetric and asymmetric strain-controlled loading histories and compares it to that of wrought Ti-6Al-4V. Moreover, a plasticity model has been customised to simulate effectively the mechanical behaviour of the as-built SLM Ti-6Al-4V. This model is formulated to account for the SLM Ti-6Al-4V-specific characteristics, under the strain-controlled experiments.
Findings
The elastoplastic behaviour of the as-built SLM Ti-6Al-4V has been compared to that of the wrought material, enabling characterisation of the cyclic transient phenomena under symmetric and asymmetric strain-controlled loadings. The test results have identified a difference in the strain-controlled cyclic phenomena in the as-build SLM Ti-6Al-4V when compared to its wrought counterpart, because of a difference in their microstructure. The plasticity model offers accurate simulation of the observed experimental behaviour in the SLM material.
Research limitations/implications
Further investigation through a more extensive test campaign involving a wider set of strain-controlled loading cases, including multiaxial (biaxial) histories, is required for a more complete characterisation of the material performance.
Originality/value
The present investigation offers an advancement in the knowledge of cyclic transient effects exhibited by a typical α’ martensite SLM Ti-6Al-4V under symmetric and asymmetric strain-controlled tests. The research data and findings reported are among the very few reported so far in the literature.
Details
Keywords
Xushan Zhao, Yuanxun Wang, Guilan Wang, Runsheng Li and Haiou Zhang
This paper aims to summarize the influence law of hybrid deposited and micro-rolling (HDMR) technology on the shaping strain and residual stress. And the rolling parameters…
Abstract
Purpose
This paper aims to summarize the influence law of hybrid deposited and micro-rolling (HDMR) technology on the shaping strain and residual stress. And the rolling parameters combination was further optimized to guide the actual production.
Design/methodology/approach
This paper proposed a three-dimensional coupled thermo-mechanical model of the HDMR process. The validated model is used to investigate the influences of rolling parameters on stress and plastic strain (the distance between the energy source and roller [De–r], the rolling compression [cr] and the friction coefficient [fr]). The orthogonal optimization of three factors and three levels was carried out. The influence of rolling parameters on the plastic strain and residual stress is analyzed.
Findings
The simulation results show that HDMR technology can effectively increase the shaping strain of the weld bead and reduce the residual tensile stress on the weld bead surface. Furthermore, the influence of rolling parameters on stress and strain is obtained by orthogonal analysis, and the corresponding optimal combination is proposed. Also, the rolling temperature significantly affects the residual stress, and the rolling reduction has a substantial effect on the plastic deformation.
Research limitations/implications
Owing to the choice of research methods, this paper failed to study microstructure evolution.
Originality/value
This paper provides a reference principle for the optimal selection of rolling parameters in HDMR.
Details
Keywords
The investigations have been primarily concerned with some of the practical problems associated with the metoplastic technique, they have in this respect attempted to solve some…
Abstract
The investigations have been primarily concerned with some of the practical problems associated with the metoplastic technique, they have in this respect attempted to solve some of these problems with the best means available at the time.