Search results

The purpose of this study is to discuss the Darcy–Forchheimer nanoliquid bio-convection flow by stretching cylinder/plate with modified heat and mass fluxes, activation energy and gyrotactic motile microorganism features.

The proposed flow model is based on flow rate, temperature of nanomaterials, volume fraction of nanoparticles and gyrotactic motile microorganisms. Heat and mass transport of nanoliquid is captured by the usage of popular Buongiorno relation, which allows us to evaluate novel characteristics of thermophoresis diffusion and Brownian movement. Additionally, Wu’s slip (second-order slip) mechanisms with double stratification are incorporated. For numerical and graphical results, the built-in bvp4c technique in computational software MATLAB along with shooting technique is used.

The influence of key elements is illustrated pictorially. Velocity decays for higher magnitude of first- and second-order velocity slips and bioconvection Rayleigh number. The velocity of fluid has an inverse relation with mixed convection parameter and local inertia coefficient. Temperature field enhances with the increase in estimation of thermal stratification Biot number and radiation parameter. A similar situation for concentration field is observed for mixed convection parameter and concentration relaxation parameter. Microorganism concentration profile decreases for higher values of bioconvection Lewis number and Peclet number. A detail discussion is given to see how the graphical aspects justify the physical ones.

To the best of the authors’ knowledge, original research work is not yet available in existing literature.

The purpose of this paper is to investigate the impact of time-periodic thermal boundary conditions on natural convection flow in a vertical micro-annulus.

Analytical solution in terms of Bessel’s function and modified Bessel’s function of order 0 and 1 is obtained for velocity, temperature, Nusselt number, skin friction and mass flow rate.

It is established that the role of Knudsen number and fluid–wall interaction parameter is to decrease fluid temperature, velocity, Nusselt number and skin friction.

No laboratory practical or experiment was conducted.

Cooling device in electronic panels, card and micro-chips is frequently cooled by natural convection.

In view of the amount of works done on natural convection in microchannel, it becomes interesting to investigate the effect that time-periodic heating has on natural convection flow in a vertical micro-annulus. The purpose of this paper is to examine the impact of time-periodic thermal boundary conditions on natural convection flow in a vertical micro-annulus.

The purpose of this paper is to investigate the computational features of the Flowfield Dependent Variation (FDV) method, a numerical scheme built to simulate flows characterized by multiple speeds, multiple physical phenomena, and by large variations in flow variables.

Fundamentally, the FDV method may be regarded as a variant of the Lax-Wendroff Scheme (LWS) that is obtained by replacing the explicit time derivatives in LWS by a weighted combination of explicit and implicit time derivatives. The weighting factors – referred to as FDV parameters – may be broadly classified as convective and diffusive parameters which, for example, are determined using flow quantities such as the Mach number and Reynolds number, respectively. Hence, the reference to these parameters and the method as “flow field dependent.” A von Neumann Fourier analysis demonstrates that the increased implicitness makes FDV both more stable and less dispersive compared to LWS, a feature crucial to capturing shocks and other phenomena characterized by high gradients in variables. In the current study, the FDV scheme is implemented in a Taylor-Galerkin-based finite element method framework that supports arbitrarily high order, unstructured isoparametric elements in one-, two- and three-dimensional geometries.

At first, the spatial accuracy of the implemented FDV scheme is established using the Method of Manufactured Solutions, wherein the results show that the order of accuracy of the scheme is nearly equal to the order of the shape function polynomial plus one. The dispersion and dissipation errors of FDV, when applied to the compressible Navier-Stokes and energy equations, are investigated using a 2-D, small-amplitude acoustic pulse propagating in a quiescent medium. It is shown that FDV with third-order shape functions accurately captures both the amplitude and phase of the acoustic pulse. The method is then applied to cases ranging from low-Mach number subsonic flows (Mach number M=0.05) to high-Mach number supersonic flows (M=4) with shock-boundary layer interactions. For all cases, fair to good agreement is observed between the current results and those in the literature.

The spatial order of accuracy of the FDV method, its stability and dispersive properties, as well as its applicability to low- and high-Mach number flows are established.

Nonlinear mixed-convective entropy optimized the flow of hyperbolic-tangent nanofluid (HTN) with magnetohydrodynamics (MHD) process is considered over a vertical slendering surface. The impression of activation energy is incorporated in the modeling with the significance of nonlinear radiation, dissipative-function, heat generation/consumption connection and Joule heating. Research in this area has practical applications in the design of efficient heat exchangers, thermal management systems or nanomaterial-based devices.

Suitable set of variables is introduced to transform the PDEs (Partial differential equations) system into required ODEs (Ordinary differential equations) system. The transformed ODEs system is then solved numerically via finite difference method. Graphical artworks are made to predict the control of applicable transport parameters on surface entropy, Bejan number, Sherwood number, skin-friction, Nusselt number, temperature, velocity and concentration fields.

It is noticed from present numerical examination that Bejan number aggravates for improved estimations of concentration-difference parameter a_2, Eckert number E_c, thermal ratio parameter ?_w and radiation parameter R_d, whereas surface entropy condenses for flow performance index n, temperature-difference parameter a_1, thermodiffusion parameter N_t and mixed convection parameter ?. Sherwood number is enriched with the amplification of pedesis-motion parameter N_b, while opposite development is perceived for thermodiffusion parameter. Lastly, outcomes are matched with formerly published data to authenticate the present numerical investigation.

To the best of the authors' knowledge, no investigation has been reported yet that explains the entropic behavior with activation energy in the flowing of hyperbolic-tangent mixed-convective nanomaterial due to a vertical slendering surface.

The paper aims to present an innovative method for identification of flight modes in the spin maneuver, which is highly nonlinear and coupled dynamic.

To fix the mode mixing problem which is mostly happen in the EMD algorithm, the authors focused on the proposal of an optimized ensemble empirical mode decomposition (OEEMD) algorithm for processing of the flight complex signals that originate from FDR. There are two improvements with the OEEMD respect to the EEMD. First, this algorithm is able to make a precise reconstruction of the original signal. The second improvement is that the OEEMD performs the task of signal decomposition with fewer iterations and so with less complexity order rather than the competitor approaches.

By applying the OEEMD algorithm to the spin flight parameter signals, flight modes extracted, then with using systematic technique, flight modes characteristics are obtained. The results indicate that there are some non-standard modes in the nonlinear region due to couplings between the longitudinal and lateral motions.

Application of the proposed method to the spin flight test data may result accurate identification of nonlinear dynamics with high coupling in this regime.

First, to fix the mode mixing problem in EMD, an optimized ensemble empirical mode decomposition algorithm is introduced, which disturbed the original signal with a sort of white Gaussian noise, and by using white noise statistical characteristics the OEEMD fix the mode mixing problem with high precision and fewer calculations. Second, by applying the OEEMD to the flight output signals and with using the systematic method, flight mode characteristics which is very important in the simulation and controller designing are obtained.

Stir casting is a promising technique used for the manufacture of Al-SiC metal matrix composites. The clustering of reinforcement particles is a serious concern in this production method. In this work, mushy-state solidification characteristics in stir casting are numerically simulated using computational fluid dynamics techniques to study the clustering of reinforcement particles.

Effects of process parameters on the distribution of particles are examined by varying stirrer speed, volume fraction of reinforcement, number of blades on stirrer and diameter ratio (ratio of crucible diameter to stirrer diameter). Further, investigation of characteristics of cooling curves during solidification process is carried out. Volume of fluid method in conjunction with a solidification model is used to simulate the multi-phase fluid flow during the mushy-state solidification. Solidification patterns thus obtained clearly indicate a strong influence of process parameters on the distribution of reinforcement particles and solidification time.

From the simulation study, it is observed that increase in stirrer speed from 50 to 150 rad/s promotes faster solidification rate. But, beyond 100 rad/s, stirrer speed limit, clustering of reinforcement particles is observed. The clustering of reinforcement particles is seen when volume fraction of reinforcement is increased beyond 10 per cent. When number of blades on stirrer are increased from three to five, an increase in solidification rate is observed, and an uneven distribution of reinforcement particles are observed for five-blade geometry. It is also seen from the simulation study that a four-blade stirrer gives a better distribution of reinforcement in the molten metal. Decrease in diameter ratio from 2.5 to 1.5 promotes faster solidification rate.

There is 90 per cent closeness in results for simulation study and the published experimental results.

This study aims to study the effect of micro-groove texture geometric parameters on the lubrication characteristics of the tripod universal coupling.

The Navier–Stokes equation was used to analyse the influence of micro-groove geometric parameters on the coupling’s lubrication performance. Further, Kriging approximate model and neighborhood cultivation genetic algorithm (NCGA) were used to optimise the micro-groove geometric parameters and improve the coupling’s lubrication performance.

The results show that as the micro-groove depth and width increase, respectively, the oil film-bearing capacity first increases and then decreases; on the contrary, the friction coefficient first decreases and then increases. With the increase of the micro-groove inclination angle, the bearing capacity of the oil film first increases and then remains unchanged. At the same time, the friction coefficient first decreases and then increases slightly. The lubricating performance of the optimised coupling is significantly improved: the optimised oil film-bearing capacity increases by 12.5%, the friction coefficient reduces by 14% and the maximum oil film pressure increases by 4.3%.

At present, the grease lubrication performance of the micro-groove textured tripod universal coupling has not been studied. The micro-groove parameters are optimised, and the coupling’s lubrication performance is improved greatly by the Kriging model and NCGA algorithm. It is of great significance to extend the coupling’s fatigue life.

This study aims to investigate the effect of the simultaneous usage of active and passive methods (which in this case are rotational oscillation and attached splitter plate, respectively) on the flow and temperature fields to find an optimum situation which this combination results in heat transfer increment and drag reduction.

The method of the solution was based on finite volume discretization of Navier–Stokes equations. A dynamic grid is coupled with the solver by the arbitrary Lagrangian–Eulerian (ALE) formulation for modeling cylinder oscillation. Parametric studies were performed by altering oscillation frequency, splitter plate length and Reynolds number.

Oscillation in different frequencies was found to be complicated. Higher frequencies provide more heat transfer, but in the lock-on region, they bring remarkable increment to the drag coefficient. It was observed that simultaneous usage of oscillation and splitter plate may have both positive and negative effects on drag reduction and heat transfer increment. Finally F = 2 and L = 0.5 were chosen as an optimum combination.

In this study, the laminar incompressible flow and heat transfer from a confined rotationally oscillating circular cylinder with an attached splitter plate are investigated. Parametric studies are performed by changing oscillation frequency, splitter plate length and Reynolds number.

This study aims to demonstrate a modified wire arc additive manufacturing (AM) named non-transferring arc and wire AM (NTA-WAM). Here, the build plate has no electrical arc attachment, and the system’s arc is ignited between tungsten electrode and filler wire.

The effect of various deposition conditions (welding voltage, travel speed and wire feed speed [WFS]) on bead characteristics is studied through response surface methodology (RSM). Under optimum deposition condition, a single-bead and thin-layered part is fabricated and subjected to microstructural, tensile testing and X-ray diffraction study. Moreover, bulk texture analysis has been carried out to illustrate the effect of thermal cycles and tensile-induced deformations on fibre texture evolutions.

RSM illustrates WFS as a crucial deposition parameter that suitably monitors bead width, height, penetration depth, dilution, contact angle and microhardness. The ferritic (acicular and polygonal) and lath bainitic microstructure is transformed into ferrite and pearlitic micrographs with increasing deposition layers. It is attributed to a reduced cooling rate with increased depositions. Mechanical testing exhibits high tensile strength and ductility, which is primarily due to compressive residual stress and lattice strain development. In deposits, ϒ-fibre evolution is more resilient due to the continuous recrystallisation process after each successive deposition. Tensile-induced deformation mostly favours ζ and ε-fibre development due to high strain accumulations.

This modified electrode arrangement in NTA-WAM suitably reduces spatter and bead height deviation. Low penetration depth and dilution denote a reduction in heat input that enhances the cooling rate.

In this study, for the first time, the efficacy of control rods for full suppression of vortex-induced vibrations (VIV) and galloping of an elastically supported rigid square cylinder that vibrates freely in the cross-flow direction is investigated.

To this aim, two small control rods are placed at constant angles of ± 45° relative to the horizontal axis and then the influence of diameter and spacing ratios on the oscillation and hydrodynamic response along with the vortex structure behind the cylinder is evaluated in the form of nine different cases in both VIV and galloping regions.

The performed simulations show that using the configuration presented in this study results in full VIV suppression for the spacing ratios G/D = 0.5, 1 and 1.5 at the diameter ratios d/D = 0.1, 0.2 and 0.3 (D: diameter of square cylinder, G: distance between rods and cylinder, d: diameter of rods). On the contrary, a perfect attenuation of galloping is only achieved at the largest diameter (d/D = 0.3) and the smallest spacing ratio (G/D = 0.5). In general, for both VIV and galloping regions, with increasing diameter ratio and decreasing spacing ratio, the effect of the control rods wake in the vortex street of square cylinder gradually increases. This trend carries on to the point where the vortex shedding is completely suppressed and only the symmetric wake of control rods is observed.

So far, the effect of rod control on VIV of a square cylinder and its amplitude of oscillations has not been investigated.