Search results

This paper aims to study the effect of Al‐Ti‐B grain refiners on the wear behaviour of hypoeutectic (Al‐0.2, 2, 3, 4, 5 and 7Si alloys) Al‐Si alloys against steel counterface using a Pin‐On‐Disc machine under dry sliding conditions.

In the present study, Al‐5Ti‐1B and Al‐1Ti‐3B grain refiners were used for the refinement of α‐Al dendrites in hypoeutectic Al‐Si alloys. Various parameters such as alloy composition, normal pressure, sliding speed and sliding distance were studied on Al‐Si alloys. Worn surfaces were characterized by SEM/EDX microanalysis.

Wear resistance of hypoeutectic Al‐Si alloys increases with the addition of Al‐Ti‐B refiners when compared with the absence of grain refiner.

The effects of normal pressure, sliding speed and sliding distance were studied by varying one parameter and keeping constant the other two parameters.

This paper provides information on improvement in wear properties of Al‐Si alloys by the addition of Al‐Ti‐B grain refiners. The effects of silicon and grain refiners containing Ti/B play a vital role and are responsible for the wear resistance of the alloys, which helps the industrialists in manufacturing Al‐Si alloy components.

Aluminium metal matrix composites are used in automotive and aerospace industries because of their high performance and weight reduction benefits. The current investigation aims to focus on the development of the stir cast aluminium-boron carbide composites with enhanced mechanical and tribological properties.

The aluminium-boron carbide composites are produced by stir casting process. Aluminium alloy A356 is chosen as the matrix material and three sets of composites are produced with different weight fractions of boron carbide particles. Higher particle size (63 µm) of boron carbide is chosen as the reinforcement material. Aluminium-boron carbide composites are tested for mechanical and tribological properties. The effect of process parameters like load, speed and percentage of reinforcement on the wear rate are studied using the pin-on-disc method. The interaction of the process parameters with the wear rate is analysed by DesignExpert software using RSM methodology and desirability analysis. The coded levels for parameters for independent variables used in the experimental design are arranged according to the central composite design. The worn surface of the pin is examined using a scanning electron microscope. The phases and reaction products of the composites are identified by X-ray diffraction (XRD) analysis.

Aluminium-boron carbide composites reveal better mechanical properties compared to monolithic aluminium alloys. Mechanical properties improved with the addition of strontium-based master alloy Al10Sr. The ultimate tensile strength, hardness and compressive strength increase with an increase in the reinforcement content. The wettability of the boron carbide particles in the matrix improved with the addition of potassium flurotitanate to the melt. Uniform dispersion of particles into the alloy during melting is facilitated by the addition of magnesium. Wear resistance is optimal at 8 per cent of boron carbide with a load 20 N and sliding speed of 348 RPM. The wear rate is optimized by the numerical optimization method using desirability analysis. The amount of wear is less in Al-B₄C composites when compared to unreinforced aluminium alloy. The wear rate increases with an increase in load and decreases with the sliding speed. The wear resistance increases with an increase in the weight fraction of the boron carbide particles.

The produced Al-B₄C composites can retain properties at high temperature. It is used in nuclear and automotive products owing its high specific strength and stiffness. The main applications are neutron absorbers, armour plates, high-performance bicycles, brake pads, sand blasting nozzles and pump seals.

Al/B₄C composites have good potential in the development of wear-resistant products.

The purpose of this paper is to develop hybrid aluminum metal matrix composite by stir casting process, reinforced with graphite and hard boron carbide particles to enhance the wear resistance. An attempt is made to optimize the wear (weight loss) and coefficient of friction (COF) by considering three factors, i.e. normal load, track diameter and sliding speed which were varied at three different levels.

The effect of graphite and boron carbide on microhardness was studied by adding them in varying percentages. After determining the best combination of hybrid reinforcements, optimization of wear (weight loss) and COF was carried out at various levels of considered factors. Taguchi design of experiments was used using the software “Minitab 16.1”. ANOVA was used to analyze the effect of various parameters on wear and COF. To validate the results, mathematical modeling was carried out in terms of regression equations and results obtained by regression equations.

The results revealed that the lower weight percentage of graphite (3 per cent) and boron carbide (1 per cent) significantly improved microhardness of developed composites. Results of ANOVA revealed that normal load was the main contributing factor for wear and COF. The results obtained by regression equations and confirmatory tests were within the results obtained by ANOVA.

To the best of the author’s knowledge, very less work has been reported on optimization of wear and COF using hybrid reinforcement particles of graphite and boron carbide.

This study aims to investigate the production and abrasive wear rate of functionally graded TiB₂/Al composites. TiB₂ particles have been spontaneously formed in liquid matrix using in situ technique. The properties of composites such as hardness, abrasive wear rate and microstructure have been examined.

In situ TiB₂ reinforcement phase was synthesized by using a liquid Al–Ti–B system. A semi-solid composite (Al_(l)-TiB_2(s)) prepared at 900°C was solidified under a centrifugal force to both grade functionally and give the final shape to materials. Abrasive wear test of materials was conducted using the pin-on-disk method at room temperature. The wear tests were carried out with two different loads of 1 Newton (N) and 2 N, a sliding velocity of 3.5 m s⁻¹ and a sliding distance of 75 m.

This research provided the following findings; TiB₂ particles can be successfully synthesized with in situ reaction technique in molten aluminum. It was determined that abrasive wear rate increases with increasing load and decreases with increasing TiB₂ reinforcement content within matrix.

In previous studies, there have been many trials on the in situ production of TiB₂-reinforced aluminum matrix composites. However, there are few studies on production of in situ TiB₂-reinforced aluminum matrix functionally graded materials. At the same time, there is no study that the properties of composite, such as hardness and abrasive wear rate, are examined together according to centrifugal force.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2019-0538/

The purpose of this study, the tribological behaviors at different temperatures of aluminium matrix composites (AMCs) with different amounts of ZrO₂ added were investigated.

Aluminium graphite (A356/2 wt% graphite (solid lubricant)) composite powders prepared by adding four different amounts (3 wt%, 6 wt%, 9 wt% and 12 wt%) of Zirconia (ZrO₂) to the matrix were mechanically alloyed for 4 h. Wear tests were conducted at five different temperatures (20 °C, 100 °C, 180 °C, 260 °C and 340 °C) and for three different sliding distances (53 m, 72 m and 94 m) on the pin-on-disc type wear tester.

Results of the study showed that the highest hardness and density value were measured for 12% ZrO₂ added AMC material. Wear test results showed that weight loss increases with increasing temperature; weight loss decreases at all temperatures with the increasing amount of reinforcement in the matrix.

In this paper, the tribological properties of aluminium matrix composites produced by the mechanical alloying method by adding different amounts of ZrO₂ were determined by simulating the tribological properties at different loads and temperatures.

Nowadays, ample industries are fascinated to look for high strength and light weight materials for the development of robust parts. Because of light weight and high stiffness to weight ratio; usage of aluminum parts is growing rapidly, especially in automotive engineering. Process improvement of Al alloys and their grain structure refinement is the current area of interest in casting companies. In this research work, an investigation has been carried out to enhance the process improvement of die casting by optimization of various significant parameters and their refinement of grains by the effect of Nb-C novel grain refiner.

L27 orthogonal array (OA) has been considered to optimize the preferred casting input parameters such as molten metal temperature (°C), die temperature (°C), injection pressure (bar), Al-3.5Nb-1.5 C novel grain refiner and Ni alloying additions as key process parameters in order to increase the quality and efficiency of Al-9Si-3Cu aluminum alloy die casting by reducing the porosity formation.

It was observed that the porosity values have significantly decreased from 0.88% to 0.25% particularly at 0.1 wt.% of new grain refiner and 0.5 wt. % of Al-6Ni master alloy. As per the ANOVA results, it was observed that Al-3.5FeNb-1.5 C grain refiner (F value 2609.22), Al-6Ni alloying addition (F value 1329.13), molten metal temperature (F value 1002.43) and, injection pressure (F value 448.06) are the factors that significantly affects the porosity, whereas die temperature was found to be insignificant. The results show that new grain refiner is one the most significant factor among the other selected parameters. The contribution of the new grain refiner to the variation of mean casting porosity is around 57.74%. confidence interval (CI) has also been estimated as 0.013 for 95% consistency level to validate the predicted range of optimum casting porosity of aforesaid alloy.

To the best of the authors' knowledge, no study has been conducted in the past to investigate the combined effect of these die casting parameters and composition factors for the development of Al-Si robust cast parts. The paper represents original research and provides new information for the fabrication of die casting parts.

The purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and wettability.

This review paper presents the various types of advanced ceramic materials according to their compounding elements, fabrication techniques of advanced ceramic powders as well as their consolidation, their characteristics, applications and wetting properties. Hydrophobic/hydrophilic properties of advanced ceramic materials are described in the paper with their state-of-the-art application areas. Optical properties of fine ceramics with their intrinsic characteristics are also presented within. Special focus is given to the brief description of application-based manipulation of wetting properties of advanced ceramics in the paper.

The study of wetting/hydrophobicity/hydrophilicity of ceramic materials is important by which it can be further modified to achieve the required applications. It also makes some sense that the material should be tested for its wetting properties when it is going to be used in some important applications like biomedical and dental. Also, these advanced ceramics are now often used in the fabrication of filters and membranes to purify liquid/water so the study of wetting characteristics of these materials becomes essential. The optical properties of advanced ceramics are equally making them suitable for many state-of-the-art applications. Dental, medical, imaging and electronics are the few sectors that use advanced ceramics for their optical properties.

This review paper includes various advanced ceramic materials according to their compounding elements, different fabrication techniques of powders and their consolidation, their characteristics, various application area and hydrophobic/hydrophilic properties.

Aluminium matrix composites are subjected to wear as well as higher temperature applications such as pistons, cylinder heads and blocks for car engines. Therefore, it is important to evaluate the performance of aluminium metal matrix composite at elevated temperature.

In the present work wear performance of Al-TiC composite with 7.5% reinforcement of TiC powder is carried out at elevated temperature. The composite specimens are prepared with the help of centrifugal casting method to get the large segregation of reinforcement on the outer layer of the composite which is subjected to wear. Taguchi method is used for preparing design of experiments.

The wear test is performed on DUCOM pin on disc setup having the heating chamber facility. The results of wear test are analysed with the help of MINITAB 19 software. The results show that temperature has dominant effect on the wear rate. The mathematical model through regression is predicted for wear rate and coefficient of friction. The study of worn-out surface is performed with the help of scanning electron microscope. The micrographs show that the type of wear is changes from abrasive to severe wear and some delamination.

The experiments are conducted as per ASTM standards. The results give the mathematical equation for wear rate and coefficient of friction at elevated temperatures.

Aerospace field is demanding a material with superior strength and high resistance against wear, tear and corrosion. The current study aimed to develop a new material with high performance to be applicable in aerospace field

A metal matrix composite AA8090-WC-ZrC was fabricated using stir casting method and its tribological behavior was investigated. Totally, five composites viz. AA/Z, AA/W, AA/WZ (1:3), AA/WZ (1:1) & AA/WZ (3:1) were prepared. Micro hardness, tensile and wear study were performed on the fabricated composites and the results were compared with AA8090 alloy

Vickers hardness test resulted that the AA/W composite showed the higher hardness value of 160 HB compared to other materials due to the reinforcing effect of WC particles with high hardness. Tensile test reported that the AA/W composite displayed the maximum tensile strength of 502 MPa owing to the creation of more dislocation density. Further, wear study showed that the AA/W composite exhibited the least wear rate of 0.0011 mm3/m because of the more resisting force offered by the WC particles. Furthermore, the AA/W composite showed the slightest mass loss of 0.0028 g and lower COF value of 0.31 due to the hinder effect of WC particle to the movement of atoms in AA8090 alloy

This work is original in the field of aerospace engineering and materials science which deals with the fabrication of AA8090 alloy with the reinforcement particles such as tungsten carbide and zirconium carbide. The impact of the combination of hybrid particles and their volume fractions on the tribological properties has been investigated in this work. This work would provide new scientific information to society.