Tribological characteristics of AA8090-WC-ZrC metal matrix composites prepared by stir casting process for Aerospace applications
Industrial Lubrication and Tribology
ISSN: 0036-8792
Article publication date: 14 August 2021
Issue publication date: 9 September 2021
Abstract
Purpose
Aerospace field is demanding a material with superior strength and high resistance against wear, tear and corrosion. The current study aimed to develop a new material with high performance to be applicable in aerospace field
Design/methodology/approach
A metal matrix composite AA8090-WC-ZrC was fabricated using stir casting method and its tribological behavior was investigated. Totally, five composites viz. AA/Z, AA/W, AA/WZ (1:3), AA/WZ (1:1) & AA/WZ (3:1) were prepared. Micro hardness, tensile and wear study were performed on the fabricated composites and the results were compared with AA8090 alloy
Findings
Vickers hardness test resulted that the AA/W composite showed the higher hardness value of 160 HB compared to other materials due to the reinforcing effect of WC particles with high hardness. Tensile test reported that the AA/W composite displayed the maximum tensile strength of 502 MPa owing to the creation of more dislocation density. Further, wear study showed that the AA/W composite exhibited the least wear rate of 0.0011 mm3/m because of the more resisting force offered by the WC particles. Furthermore, the AA/W composite showed the slightest mass loss of 0.0028 g and lower COF value of 0.31 due to the hinder effect of WC particle to the movement of atoms in AA8090 alloy
Originality/value
This work is original in the field of aerospace engineering and materials science which deals with the fabrication of AA8090 alloy with the reinforcement particles such as tungsten carbide and zirconium carbide. The impact of the combination of hybrid particles and their volume fractions on the tribological properties has been investigated in this work. This work would provide new scientific information to society.
Keywords
Citation
A, K., S, S., K, G. and J., B.R. (2021), "Tribological characteristics of AA8090-WC-ZrC metal matrix composites prepared by stir casting process for Aerospace applications", Industrial Lubrication and Tribology, Vol. 73 No. 6, pp. 980-985. https://doi.org/10.1108/ILT-05-2021-0191
Publisher
:Emerald Publishing Limited
Copyright © 2021, Emerald Publishing Limited