Search results

In 2022, the Baltimore professional development school (PDS) partner schools, John Ruhruh Elementary/Middle School (JREMS) and Notre Dame of Maryland University (NDMU) received funds through a Maryland Educational Emergency Revitalization (MEER) grant to determine (a) to what extent additional resources and professional development would increase JREMS teachers’ efficacy in technology integration and (b) to what extent NDMU professional development in the form of workshops and self-paced computer science modules would result in greater use of technology in the JREMS K-8 classrooms. Results indicated a statistically significant improvement in both teacher comfort with technology and integrated use of technology in instruction.

Survey data were collected on teacher-stated comfort with technology before and after grant implementation. Teachers’ use of technology was also measured by unannounced classroom visits by administration before and after the grant implementation and through artifacts teachers submitted during NDMU professional development modules.

Results showing significant increases in self-efficacy with technology along with teacher integration of technology exemplify the benefits of a PDS partnership.

This initiative was original in its approach to teacher development by replacing required teacher professional development with an invitation to participate and an incentive for participation (a personal MacBook) that met the stated needs of teachers. Teacher motivation was strong because teammates in a strong PDS partnership provided the necessary supports to induce changes in teacher self-efficacy.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

Is there a secret recipe for economic growth?

No, there is no recipe, but we can extrapolate some pieces of advice from Adam Smith.

An economy can leave behind its “dull” stagnant state and grow when its markets expand, when the productivity of its workers increases thanks to high compensations, which are seen as incentives to work harder and when lobbying and cronyism are kept at bay. Luck plays a role too, but these three ingredients are necessary, even if not sufficient, for an economy to grow and thus be “cheerful.”

These three aspects – expansion of market, liberal compensation of workers and lobbying – especially combined, have often been underestimated in Smith’s understanding of the possible sources of economic growth.

The purpose of this review is to comprehensively consider the material properties and processing of additive titanium alloy and provide a new perspective for the robotic grinding and polishing of additive titanium alloy blades to ensure the surface integrity and machining accuracy of the blades.

At present, robot grinding and polishing are mainstream processing methods in blade automatic processing. This review systematically summarizes the processing characteristics and processing methods of additive manufacturing (AM) titanium alloy blades. On the one hand, the unique manufacturing process and thermal effect of AM have created the unique processing characteristics of additive titanium alloy blades. On the other hand, the robot grinding and polishing process needs to incorporate the material removal model into the traditional processing flow according to the processing characteristics of the additive titanium alloy.

Robot belt grinding can solve the processing problem of additive titanium alloy blades. The complex surface of the blade generates a robot grinding trajectory through trajectory planning. The trajectory planning of the robot profoundly affects the machining accuracy and surface quality of the blade. Subsequent research is needed to solve the problems of high machining accuracy of blade profiles, complex surface material removal models and uneven distribution of blade machining allowance. In the process parameters of the robot, the grinding parameters, trajectory planning and error compensation affect the surface quality of the blade through the material removal method, grinding force and grinding temperature. The machining accuracy of the blade surface is affected by robot vibration and stiffness.

This review systematically summarizes the processing characteristics and processing methods of aviation titanium alloy blades manufactured by AM. Combined with the material properties of additive titanium alloy, it provides a new idea for robot grinding and polishing of aviation titanium alloy blades manufactured by AM.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

This paper discusses the effectiveness of a consortium-based student mobility programme by investigating the impact of the Asian International Mobility for Students (AIMS) Programme. AIMS is a regional multilateral large-scale student mobility programme based on a consortium of 10 member countries and 87 member universities with the Southeast Asian Ministers of Education Organization Regional Centre for Higher Education and Development (SEAMEO RIHED) as a facilitator. Over 6,000 students have participated in a semester-long intra-regional student exchange under AIMS since 2010.

The study employed questionnaire surveys and semi-structured interviews to investigate the impact of AIMS and its advantages as a consortium-based student mobility programme.

It was found that AIMS significantly impacted member universities by accelerating their internationalisation processes through increasing the number of inbound and outbound students and courses offered in English and so on. AIMS has promoted harmonisation among the members by developing common procedures and guidelines, providing platforms for mutual sharing of experiences and good practices and capacity building of international relations offices. AIMS has also had a significant impact on students by enhancing their regional identity and knowledge about the region of Asia, contributing to their development as future regional and global citizens. As advantages of AIMS, member universities efficiently built a foundation for international collaboration with common procedures and guidelines and shared their experiences through such venues as Annual Review Meetings. Students also feel supported by having clear guidance and find programmes prepared by host universities and SEAMEO RIHED useful.

This study is unique in that it empirically studies the impact of one of Asia’s largest student mobility programmes for the first time by analysing large-scale qualitative and quantitative data.

School effectiveness has attracted some currency in educational research globally since the 1960s though such studies mostly point to the efforts of principal leadership as the basis for promoting effective schools. However, in the case of Ghana, there is a lack of research conducted in the area, and due to that, this study sought to explore internal public perspectives of what constitutes school effectiveness in the Colleges of Education in the Upper East Region of Ghana.

This study employed the convergent parallel mixed-method design otherwise called concurrent mixed-method design. The population for the study comprised second and third-year students, tutors and leadership of the colleges. In total, 308 respondents constituted the sample size. The breakdown is 257 students in all, 41 tutors and 10 leaders of the colleges. Two instruments, namely, an in-depth interview guide and a questionnaire were used to elicit responses to address the object of this study.

The study revealed that the characteristics of effective schools include the high academic performance of students and a good show of disciplined behavior by both students and staff in the colleges among others.

To the best of our knowledge, during the search for studies conducted on school effectiveness, there is no scientific study done in Ghana highlighting the attributes of effective educational institutions. Most of the studies conducted in the area of educational studies only focused on principal leadership, educational access, participation and equity at the level of pre-tertiary institutions.

The purpose of this paper is to advance the understanding of paradoxes, underlying tensions and potential management strategies when integrating digital technologies into existing lean-based production systems (LPSs), with the aim of achieving synergies and fostering the development of production systems.

This study adopts a collaborative management research (CMR) approach to identify patterns of organisational tensions and paradoxes and explore management strategies to overcome them. The data were collected through interviews and focus group interviews with experts on lean and/or digital technologies from the companies, from documents and from workshops with the in-case researchers.

The findings of this paper provide insights into the salient organisational paradoxes embraced in the integration of digital technologies in LPS by identifying different aspects of the performing, organising, learning and belonging paradoxes. Furthermore, the findings demonstrate the intricacies and relatedness between different paradoxes and their resolutions, and more specifically, how a resolution strategy adopted to manage one paradox might unintentionally generate new tensions. This, in turn, calls for either re-contextualising actions to counteract the drift or the adoption of new resolution strategies.

This paper adds perspective to operations management (OM) research through the use of paradox theory, and we (1) provide a fine-grained perspective on why integration sometimes “fails” and label the forces of internal drift as mechanisms of imbalances and (2) provide detailed insights into how different management and resolution strategies are adopted, especially by identifying re-contextualising actions as a key to rebalancing organisational paradoxes in favour of the integration of digital technologies in LPSs.

Municipalities, as the front lines of service delivery, use websites as one of the tools to communicate information to the public. While it is considered a record, many organisations, including municipalities, do not manage websites as such. This study aims to explore the archiving of websites as records in the municipalities of KwaZulu-Natal (KZN) Province in South Africa by using the web archiving life cycle model.

This study used a mixed-methods research with an explanatory design, with quantitative data collected first through content analysis of websites and qualitative data collected through interviews. Researchers used multilevel sampling, first quantitatively analysing all available websites of the municipalities (52) in KZN, and then qualitatively selecting only records managers, information managers, web administrators, communication managers and website managers or designers from municipalities because of their understanding and involvement with websites in some way.

This study established that some records on municipal websites are often in paper format in record-keeping systems, whereas others are born digital and are not captured in the systems. Municipalities lack a dedicated web online harvesting tool as well as an archiving policy or strategy to guide website archiving. Furthermore, municipalities placed a high reliance on service providers to keep their websites operational.

It became clear during the interviews that most of the participants were unfamiliar with web archiving. As a result, only 12 of the 56 selected participants from the municipalities provided the required information in relation to the current study as others could not provide answers. Data for other participants were not analysed.

Due to a lack of infrastructure for ingesting digital records into archival custody, a framework for harvesting web content of value is proposed both internally in municipalities and externally to an archive repository.

The purpose of this study was to investigate a framework for the implementation of freedom of information (FOI) legislation in South Africa, against Article 19’s nine principles of FOI legislation.

This qualitative study used semi-structured interviews to collect data from six experts selected by means of the snowball sampling technique and content analysis. The study used a modified Delphi design consisting of two rounds of interviews.

The results showed that little effort is made by government officials to demonstrate commitment to the implementation of FOI legislation.

The passing of FOI is expected to reduce corruption, increase public participation, reduce the level of secrecy and increase transparency and openness. This is not the case as the implementation of this socioeconomic right in South Africa is faced by numerous challenges, such as a lack of political will, secrecy laws providing for the opposite of what the FOI legislation seeks to achieve, poor legislative interpretation and a lack of clear policies. The study proposes a framework aimed at addressing these challenges.

The study provides a framework for the implementation of FOI legislation. The framework was developed under the guidance of Article 19 principles of freedom of information legislation.