Search results

The main objective of the present research is to investigate the benefits of using geogrid reinforcement in minimizing the rate of deterioration of ballasted rail track geometry resting on soft clay and to explore the effect of load amplitude, load frequency, presence of geogrid layer in ballast layer and ballast layer thickness on the behavior of track system. These variables are studied both experimentally and numerically. This paper examines the effect of geogrid reinforced ballast laying on a layer of clayey soil as a subgrade layer, where a half full scale railway tests are conducted as well as a theoretical analysis is performed.

The experimental tests work consists of laboratory model tests to investigate the reduction in the compressibility and stress distribution induced in soft clay under a ballast railway reinforced by geogrid reinforcement subjected to dynamic load. Experimental model based on an approximate half scale for general rail track engineering practice is adopted in this study which is used in Iraqi railways. The investigated parameters are load amplitude, load frequency and presence of geogrid reinforcement layer. A half full-scale railway was constructed for carrying out the tests, which consists of two rails 800 mm in length with three wooden sleepers (900 mm × 90 mm × 90 mm). The ballast was overlying 500 mm thick clay layer. The tests were carried out with and without geogrid reinforcement, the tests were carried out in a well tied steel box of 1.5 m length × 1 m width × 1 m height. A series of laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, was measured in reinforced and unreinforced ballast cases. In addition to the laboratory tests, the application of numerical analysis was made by using the finite element program PLAXIS 3D 2013.

It was concluded that the settlement increased with increasing the simulated train load amplitude, there is a sharp increase in settlement up to the cycle 500 and after that, there is a gradual increase to level out between, 2,500 and 4,500 cycles depending on the load frequency. There is a little increase in the induced settlement when the load amplitude increased from 0.5 to 1 ton, but it is higher when the load amplitude increased to 2 ton, the increase in settlement depends on the geogrid existence and the other studied parameters. Both experimental and numerical results showed the same behavior. The effect of load frequency on the settlement ratio is almost constant after 500 cycles. In general, for reinforced cases, the effect of load frequency on the settlement ratio is very small ranging between 0.5 and 2% compared with the unreinforced case.

Increasing the ballast layer thickness from 20 cm to 30 cm leads to decrease the settlement by about 50%. This ascertains the efficiency of ballast in spreading the waves induced by the track.

The concept of “participation” has become a buzzword in contemporary public governance models. However, despite the broad and significant interest, defining participation remains a debated topic. The aim of the current study was to explore how participants perceived and interpreted the meaning and scope of participation.

This study is part of a four-year (2019–2022) longitudinal research project investigating stakeholder participation in the context of developing and establishing a strategic regional plan in Region Skåne in southern Sweden. The research project has a qualitative approach and uses interviews with different stakeholder groups such as municipal politicians and public officials and a survey as empirical material.

The authors developed a participation spectrum including eight types of participation: to be open, to be informed, to be listened to, to discuss, to be consulted, to give and take, to collaborate and to co-create. The authors also identified four different purposes of participation: creating a joint network, creating a joint understanding, creating a joint effort and creating a joint vision. The spectrum and the purposes were related through four characteristics of participation, i.e. involvement, interaction, influence and empowerment.

The study rests on a single case, and so the results have limited transferatibility.

Researching participation in terms of the participants' perceptions contributes a new perspective to the existing literature, which has commonly focussed on the organizers' perceptions of participation. Moreover, in order to clarify what participation meant to the participants, the study puts emphasis on untangling this from the why question of participation.

This paper aims to define the efficiency achieved by urban transport companies in Spain concerning the resources they use, considering the type of management used for implementation, public-private, and size.

This study consisted of an analysis of the efficiency of 229 public-private urban transport operators during the period 2012–2021 using Data Envelopment Analysis, the Malmquist Index and inference estimators to determine productivity, efficiency change into Pure Technical Efficiency Change (PTECH), and scale efficiency change.

Based on the efficiency analysis, the authors concluded that of the 229 companies studied, more than 35 were inefficient in all analysed periods. Considering the sample used, direct management is considered significantly more efficient. It cannot be concluded that the size of these companies influences their efficiency, as the data show unequal development behaviours in the studied years.

This study provides arguments on whether there is a significant difference between the two types of management in the urban transport sector. It also includes firm size as a study variable, which has not been previously considered in other studies related to urban transport efficiency. Efficiency should be a crucial factor in determining funding allocation in this sector, as it encourages operators to optimize and improve their services.

Information and communications technology (ICT) is helping to create a sustainable information society and foster development. This study aims to investigate the interdependencies of organisational flexibility enabled by ICT, demographics and containment measures in the ever more dismal economic performances seen during COVID-19 with a view to preparing socio-economic systems for similar future shocks.

Using non-classical fuzzy-set qualitative comparative analysis, the authors are able to capture the asymmetric relationships and complexities found in real life.

Analysing data acquired from the Oxford COVID-19 Government Response Tracker and Eurostat, the authors find these conditions give mixed results depending on how they are combined. The results imply that countries under strict containment measures might only be able to survive when fully equipped with ICT solutions. E-commerce also plays an important role in countries with a below-average decrease in their growth rate. Put differently, the presence and absence of telework produces mixed results. If the population is old, telework seems to generate the desired outcomes. Yet, when the population is young, it might be more beneficial to avoid this practice.

Unlike studies that mainly assumed symmetrical effects and linear relationships, this study investigates the interdependencies of organisational and macro-level factors. On the micro level, this study is useful for managers allocating IT investments for any future occurrence of a general disaster/pandemic. On the macro level, the study can act as an example for the rest of the world regarding the appropriateness of assorted COVID-19 pandemic responses as witnessed in European countries.

This paper investigates the effect of state-society relations on the industrially-related growth paths of developed countries.

It introduces a novel theoretical framework, the state-business-labor relations (SBLR) framework, where four main actors are identified: the state, big businesspersons or tycoons, owners and managers of small and medium enterprises (SMEs) or Entrepreneurs and labor. Different SBLR categories or modes are introduced depending on levels of coordination and power relations between the studied actors. The paper then investigates how these SBLR modes, through adopting various policies targeting the industrial sector, lead to different growth paths. Rather than focusing only on economic growth, this research regards a growth path as a matrix of the performance in long-run growth and equality of distribution.

Using regression analysis and statistical data, the results suggest that the Co-Balanced mode, having higher levels of coordination and lower favoritism, leads to the best growth path among the four introduced modes, especially with its emphasis on high levels of venture capital availability and easiness of starting business. while the Lib-Capture mode, characterized by lower coordination and higher favoritism, seems to have the worst growth path and the best implemented policy for this mode is suggested to be high profit taxes that seem to counter the negative impact of the existing high levels of favoritism.

Despite the important findings that this research has reached, this paper is mainly meant to open a further investigation into this topic and open this dimension that the research on VoC and political economy have under-researched. A deeper investigation of SBLR typologies that could only be possible by having richer datasets with more data on coordination for the whole world, rather than only the advanced economies, would further our understanding of the dynamics that shape the growth paths of different countries of the world.

To realize the best industrial growth path, fighting favoritism should be an important objective. The negative impact of favoritism on innovation could not be disregarded in the eve of the fourth industrial revolution, where innovation is increasingly pivotal to future industrial development. Actively engaging societal groups in the policymaking process is important in addressing their concerns and balancing them at the same time. This should lead to the double benefit of formulating better policies that should foster growth as well as provide better distribution of this growth. High levels of coordination should help in realizing this objective. Yet, this could only be possible if societal groups are free to associate and aggregate their power and when there are means of preventing one actor from gaining more favorite treatment and exclusive influence over policymakers. The presence of both powerful and broadly represented business associations and labor unions and the existence of a government interested in coordinating their efforts-rather than letting itself be controlled by one group at the expense of the others-should help in the realization of the best growth path. Thus, institutional reform that empowers societal groups and enables them to defend their interests as well as fights all forms of corruption should lead to the realization of a more prosperous and equitable industrial development, with the “re-industrialization” of the developed world being no exception. The technological and social challenges of intensive automation and digitalization accompanying the fourth industrial revolution make the envisaged institutional reform more urgent.

This paper is introducing a novel theoretical framework for studying the effect of state-society relations, particularly SBLR, on the industrial growth paths of developed countries. It integrates three important bodies of literature in order to build a more comprehensive understanding of the dynamics of state-society relations and their economic consequences. These are the Varieties of Capitalism (VoC), State-Business Relations (SBR) and Industrial Relations. The SBLR framework differentiates between tycoons and entrepreneurs, an important distinction that often goes unnoticed. Different SBLR categories or modes are introduced, depending on levels of coordination and power relations between the actors. It is proposed in this research that the effect on growth paths goes beyond the simple dichotomy between CMEs and LMEs usually present in the literature of VoC and that power relations provide an essential complementary dimension in explaining this causality.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

The “chiralisation” of Euclidean polygonal tessellations is a novel, recent method which has been used to design new auxetic metamaterials with complex topologies and improved geometric versatility over traditional chiral honeycombs. This paper aims to design and manufacture chiral honeycombs representative of four distinct classes of 2D Euclidean tessellations with hexagonal rotational symmetry using fused-deposition additive manufacturing and experimentally analysed the mechanical properties and failure modes of these metamaterials.

Finite Element simulations were also used to study the high-strain compressive performance of these systems under both periodic boundary conditions and realistic, finite conditions. Experimental uniaxial compressive loading tests were applied to additively manufactured prototypes and digital image correlation was used to measure the Poisson’s ratio and analyse the deformation behaviour of these systems.

The results obtained demonstrate that these systems have the ability to exhibit a wide range of Poisson’s ratios (positive, quasi-zero and negative values) and stiffnesses as well as unusual failure modes characterised by a sequential layer-by-layer collapse of specific, non-adjacent ligaments. These findings provide useful insights on the mechanical properties and deformation behaviours of this new class of metamaterials and indicate that these chiral honeycombs could potentially possess anomalous characteristics which are not commonly found in traditional chiral metamaterials based on regular monohedral tilings.

To the best of the authors’ knowledge, the authors have analysed for the first time the high strain behaviour and failure modes of chiral metamaterials based on Euclidean multi-polygonal tessellations.

The purpose of this paper is to identify the differences between Hungarian family-owned businesses (FOBs) and non-family-owned businesses (NFOBs) concerning the elements of SME competitiveness and financial performance.

The research covers the Hungarian data set of the Global Competitiveness Project (GCP, www.sme-gcp.org) of 738 (data collection between 2018 and 2020) non-listed SMEs, of which 328 were FOBs. The study uses the comprehensive, multidimensional competitiveness measurement of the GCP built on the resource-based view (RBV) and the configuration theory. Financial performance was captured with two composite indicators: short-term and long-term financial performance (LTFP). The comparative analysis between FOBs and NFOBs was conducted using binary logistic regression.

The results show that FOBs are more prone to focusing on local niche markets with higher longevity and LTFP than NFOBs. However, FOBs have lower innovation intensity and less organised administrative procedures. The most contradicting finding is that the FOBs’ higher LTFP is accompanied by significantly lower competitiveness than in the case of NFOBs.

This study goes beyond other GCP studies by including composite financial performance measures among the variables examined. The combination of performance-causing (resources and capabilities) and performance-representing (financial performance) variables provides a better understanding of the non-listed SMEs in terms of family ownership. The results help academia to enrich the RBV-competitiveness, the non-listed SME management and finance literature, and policymakers to design business development and support schemes. They also show future entrepreneurs the impact of family ownership on entrepreneurial success.

This study aims to conduct performance and clustering analyses with the help of Digital Government Reference Library (DGRL) v16.6 database examining the role of emerging technologies (ETs) in public services delivery.

VOSviewer and SciMAT techniques were used for clustering and mapping the use of ETs in the public services delivery. Collecting documents from the DGRL v16.6 database, the paper uses text mining analysis for identifying key terms and trends in e-Government research regarding ETs and public services.

The analysis indicates that all ETs are strongly linked to each other, except for blockchain technologies (due to its disruptive nature), which indicate that ETs can be, therefore, seen as accumulative knowledge. In addition, on the whole, findings identify four stages in the evolution of ETs and their application to public services: the “electronic administration” stage, the “technological baseline” stage, the “managerial” stage and the “disruptive technological” stage.

The output of the present research will help to orient policymakers in the implementation and use of ETs, evaluating the influence of these technologies on public services.

The research helps researchers to track research trends and uncover new paths on ETs and its implementation in public services.

Recent research has focused on the need of implementing ETs for improving public services, which could help cities to improve the citizens’ quality of life in urban areas. This paper contributes to expanding the knowledge about ETs and its implementation in public services, identifying trends and networks in the research about these issues.

This chapter is focussed on the macro context of higher education and describes the historical developments in higher education and how these developments affect academic jobs and academic work. When we sketch the development of higher education with a few broad strokes of the pen, we see (1) a development from a small-scale elite institution to broad training (and research) institutes; (2) a struggle over control of higher education; and (3) a movement in which higher education is professionalized and increasingly assigned a societal task, with a series of consequences for education, research and impact. These developments contribute to a field of tension in which old traditions of academic behaviour must be reconciled with demands that are placed on higher education by society. This makes talent management, both on an individual and collective level, no easy task.